Next Generation Microwave Power Module Launched by TMD
A brand new microwave power module (MPM) is being launched by TMD Technologies at the IEEE's International Microwave Symposium in Boston, MA. The PTX8207 includes a next generation" high power mini-TWT to provide a wider frequency range and higher power than previous models. The PTX8207 is specified to provide a mid-band power of 140 W and an operating frequency range of 4.5-18 GHz. The MPM...
Read More »Signal Booster complies with IFC/NFPA new building standards.
Compliant with International Fire Code (IFC) 2009 and National Fire Protection Association (NFPA) 1 2009 codes, Bird RescueLine ensures first responders have reliable radio communications in large structures - even while power is unavailable. This electronic lifeline, compatible with standard fire-alarm panels, features 12 hr battery back-up and is designed for use inside new buildings. Its alarm...
Read More »Stereo Audio IC suits portable multimedia applications.
Supplied in 5 x 5 mm, 32-pin QFN package, AT73C240 integrates 20-bit stereo DAC with 90 dB dynamic range and 1 W (max) audio power amp. Stereo DAC comprises multi-bit sigma-delta modulator with dither, continuous time analog filters, and analog output drive circuitry. Master clock is 256 or 384 times sampling frequency, allowing choice of input data rate up to 50 kHz. Also, stereo 32 ohm headset...
Read More »RFMD® Expands Broadband Transmission Product Portfolio; Enables Enhanced Bandwidth-Driven CATV Services and Advanced Fiber Deep Architectures
New Products Include Industry's First 30dB, 1GHz Power Doubler Amplifier GREENSBORO, NORTH CAROLINA - May 7, 2009 - RF Micro Devices, Inc. (Nasdaq:RFMD), a global leader in the design and manufacture of high-performance semiconductor components, today announced the addition of two new products to the Company's extensive portfolio of broadband transmission products. The two newly released products...
Read More »
Industrywide Applications for Deep Drawn Metal Stamping
Deep-drawn metal stamping applies a significant punching force to radically draw metal sheets into a die cavity. Finished components produced by this process tend to have a depth that exceeds their diameter, which is why manufacturers refer to it as "deep-drawn" metal stamping.
Read More »
Operational Amplifiers include on-chip calibration circuit.
To minimize drift over time and temperature, 50 MHz MCP65X Series includes mCal on-chip, one-shot calibration circuit that calibrates offset voltage at power-up using internal power on-reset detector, or based upon state of external pin. Units feature rail-to-rail output with output drive current of 95 mA. Housed in 8-pin SOIC, 3 x 3 mm DFN, or 10-pin MSOP package, op amps are suited for...
Read More »Digital Amplifier Module permits multifunctional operation.
Miniaturized DEC Module 24/2 is digital 1-quadrant amplifier with speed controller for brushless EC motors with Hall Sensors up to 48 W and surface area measuring less than 5 cmÂ-². It has supply voltage range of 8-24 Vdc (alternatively 5 Vdc) and continuous output current of 2 A. Designed for maximum motor speed of 80,000 rpm, amplifier has 2 connector arrays arranged in 2.54 mm pattern for...
Read More »RFMD® Selected by Leading Manufacturer of Smartphones to Supply Highly Integrated GPS LNA Module
Smartphone To Feature Rapidly Growing Open Source Mobile Operating System GREENSBORO, N.C., April 30 - RF Micro Devices, Inc., a global leader in the design and manufacture of high-performance semiconductor components, today announced that the Company has been selected by a leading smartphone manufacturer to supply its RF2815 GPS LNA module for use in a soon to be released CDMA smartphone. This...
Read More »Audio Amplifier optimizes battery life in portable devices.
Model AAT5101 2.5 W Class D audio amplifier operates from 2.1-5.5 V supply voltage and delivers up to 92% efficiency and offers 0.06 Â-µA shutdown current and 1.35 mA quiescent current. It features low noise, filterless PWM architecture and outputs 1.35 W with 8 W load and THD+N of less than 1% and 2.5 W with 4 W load and THD+N below 10%. Operating across -40 to +85°C temperature...
Read More »Instrumentation Amp enables power efficient medical devices.
Measuring 1.6 x 2.0 mm, AD8235 instrument amplifier draws 40 mA and operates on 1.8-5.5 V power supplies, with common-mode input-voltage range of 4 and 1.4 V on 5 and 1.8 V supplies, respectively. Common-mode rejection ratio of 86 dB eliminates common-mode interference. Also, unit features 6 nA shutdown current and 40 pA bias current. Low power consumption makes device suitable for use in home...
Read More »
Fiber Optic Amplifiers incorporate digital display.
Available for DIN-rail mounting (DIN/EN 50022), fiber-optic amps feature design elements, such as 8-digit, 14-segment LCD and 31 x 60 x 10 mm housing, that permit stacking in large numbers and space-restricted areas. Distance can be set by means of teach-in (including dynamic), with additional manual fine adjustment, and increments of less than 1 mm across whole sensing range ensure precision....
Read More »
560 and 572 Series IP67 Waterproof Inline Plug and Socket Connectors with Shock and Vibration Resistance
EDAC's new line of IP67 waterproof plug and socket connectors represent the cutting edge of waterproof connection technology. Part of the 560 and 572 series of connectors, they utilize innovative design concepts to deliver a level of performance and value that is unmatched in the industry. See our video to learn more.
Read More »
