External Output Amplifier provides up to 50 Vpp amplification.
Designed for R&D development and test engineers, 2-channel external output amplifier, Agilent 33502A has two-unit, half-rack mechanical form factor, and is configured with LAN (LXI Class-C compliant) and USB interfaces. Unit can be independently configured with input coupling and input impedance (50 W|1 MW) to match specific circuits. Configurable product provides both programmable interface and...
Read More »
Stereo Headphone Amplifier rejects RF noise.
Designed for portable multimedia devices, MAX9820 IC employs DirectDrive-® architecture to eliminate clicks and pops, as well as large output-coupling capacitors. Unit also suppresses RF radiation, preventing amplifier from demodulating coupled noise. With 2.7-5.5 V single supply, amplifier delivers 95 mW of output power. Device consumes less than 1 -µA in shutdown mode and 3 mA during...
Read More »
Current Amplifier measures in femto to pico Ampere range.
FEMTO DDPCA-300 variable gain ultra low noise current amplifier has switchable gain from 104-1013 V/A. It features noise input of 0.4 fA/sq-rt Hz min, allowing measurement of currents in femto to pico Ampere range. Dynamic range is 240 dB. Product is available in miniaturized, rugged aluminum housing designed to optimize EMI shielding, and features adjustable voltage directly on amplifier input...
Read More »
Digital Amplifier enables gravimetric warehouse monitoring.
Providing digital measured value processing with long-term stable supply voltage for up to 4 analog load cells, VKIA405 enables monitoring of loads during operations and prevents any possibility of overloading in storage area. It is fitted with serial RS485 interface for integration with control and data processing system of warehouse. Featuring integrated off-center load compensation network,...
Read More »
Thinking About Manufacturing Automation?
Check out this white paper to learn how cobots are able to automate manual processes.
Read More »Op Amps achieve 180 MHz at 1 mA.
Featuring rail-to-rail inputs and outputs, Models LTC6246, LTC6247, and LTC6248 are single, dual, and quad op amps, respectively, with 90 V/-µs slew rate and 4.2 nV/√Hz wideband noise. Input offset voltage is specified at 500 -µV max and open loop gain is 45 V/-µV. Employing bias current cancellation to achieve max of 350 nA input bias current over most of input common mode voltage range, op...
Read More »
Plastic Fiber Optic Amps can reduce wiring by up to 70%.
Intended for plastic fiber optic cables, SU18 and SU19 Photoelectric Fiber Optic Sensors feature multiple detection modes, selectable timing functions, remote teach capability, and 4-in-1(TM) output. Latter automatically selects NPN light/dark on and PNP light/dark on output options from single sensor. While SU18 series is available in pushbutton or potentiometer adjustable versions, SU19 series...
Read More »Plenum Amplifier suits commercial/educational environments.
Compact, 18 V, 45 W, plenum rated amplifier/mixer, model PlenumAmp PMA-245 accepts both RCA and 3.5 mm stereo inputs. With independent mixer volume controls for each source, unit is designed for use with data projectors. Built-in noise filtration circuitry ensures clear audio performance. Measuring 5.43 x 1.65 x 4.80 in., chassis features heat-sink to dissipate heat effectively.
Read More »
Variable Gain Amplifiers have on-board CW Doppler beamformers.
Respectively tailored to support 10-/12-bit ADCs, MAX2036/MAX2038 are integrated, SiGe variable-gain amplifiers with on-board continuous-wave (CW) Doppler beamformers. Integrated mixers and LO generators exhibit low thermal and jitter noise performance of -155 dBc/Hz @ 1 kHz offset from 900 mVP-P, 1.25 MHz carrier signal. Designed for ultrasound imaging applications, ICs have necessary dynamic...
Read More »
Stereo Subsystem provides rich audio from li-ion battery.
Supplied in 2.5 x 3 mm UCSP(TM), MAX9879 combines stereo Class D speaker amp, DirectDrive-® stereo headphone amp, and analog bypass switch. Class D amplifier technologies provide Class AB audio performance with Class D efficiency. Able to deliver 715 mW output power from 3.7 V supply into 8 ohm load with 88% max efficiency, product also features input mixing, volume control, click-and-pop...
Read More »RFMD® Introduces Portfolio of Ultra-Linear Push-Pull Amplifiers for Multiple CATV Infrastructure Applications
New Amplifiers Deliver Best-In-Class Composite Second Order (CSO) Distortion Performance, Enable Future DOCSIS-®-Compliant Return Path Networks DENVER, COLORADO - October 29, 2009 - RF Micro Devices, Inc. (Nasdaq GS: RFMD), a global leader in the design and manufacture of high-performance radio frequency systems and solutions, today introduced a portfolio of push-pull amplifiers designed for...
Read More »
Let Our Safety Experts Lower Your Risk
Elite Technical Services provides your company with qualified and experienced safety experts. Specializing in confined space and high-angle technical rescue and jobsite hazard assessment, your workplace safety is the top priority. Check out the video to learn more.
Read More »
