GaN HEMT MMIC Power Amplifier has 0.25 sq in. footprint.
Suited for military and ISM (industrial, scientific, and medical) applications, CMPA0060025F offers 25 W output power over bandwidth of 20 MHz to 6 GHz. Compact amplifier can operate with supply voltages up to 50 V and has power gain of 12 dB typical.
Read More »
Mono Class D Audio Power Amp has filter-less capability.
Supplied in 9-pin WLCSP, single-channel AAT5101 employs low-noise, filterless PWM architecture that eliminates output filter and reduces external component count in cellular phones and PDAs. It operates from 2.1-5.5 V, and output capabilities include 1.35 W with 8x load and 2.5 W with 4x load. In addition to pop and click noise suppression circuitry, 0.12% THD+N @ 5 V and 91 dB SNR values ensure...
Read More »
Pallet Amplifier suits broadband applications.
Featuring Freescale(TM) MRF6V2300NR1 power transistor, rugged 600 W peak power 2-stage Class AB pallet amplifier Model LD600-10.80 achieves 40 dB gain and features gain-flatness of ±1 dB across HF-VHF band from 10-80 MHz. Operational over -10 to 60°C range, it is designed for ISM applications operating with pulsed signals (600 W, 10% duty), and for military applications up to 200 W...
Read More »Driver/Limiting Amplifier features built-in de-emphasis.
Operating on single 1.2 V power supply, Model ISL35111 features built-in de-emphasis to compensate for frequency dependent attenuation of PCB traces. Unit enables channel throughputs of 10-11.1 Gbps while supporting lower data rates including 8.5, 6.25, 5, 4.25, 3.125, and 2.5 Gbps. When used in conjunction with ISL36111 receive-side equalizer, Model ISL35111 supports 10 G serial data...
Read More »
How to Effectively and Efficiently Clean Heat Exchangers, Part I
An introduction to a three part series about the importance, benefits, and methods of cleaning heat exchangers.
Read More »Avago Technologies' Automotive-Grade Optocouplers Selected for Use in Mazdas New Hydrogen/Gas Powered Hybrid Vehicle
R2Coupler Isolation Products Being Used for Electric Power Generation Automaker's Premacy 'Green Cars' SAN JOSE, CA, and SINGAPORE, January 6, 2010 -- Avago Technologies (Nasdaq: AVGO), a leading supplier of analog interface components for communications, industrial and consumer applications, today announced that Yaskawa Electric Corporation has selected two of its latest R2Coupler(TM) isolation...
Read More »Audio Subsystem enhances mobile phone performance.
With architecture that minimizes pop and click, ISL99203 consists of fully integrated class-D mono amplifier combined with capfree headphone amplifier. It operates from 2.4-5.5 V input supply and can deliver 1.5 W of continuous output power with less than 10% THD+N, driving 8 X load from 5 V supply. Speaker amplifier features low-noise modulation scheme and operates with 85% efficiency at 400 mW...
Read More »
TGA2807-SM - Latest EDGE QAM Amplifier for DOCSIS® 3.0
TriQuint's new TGA2807-SM offers high-efficiency performance; one device can replace 2 conventional solutions. The new TGA2807-SM is tailored for DOCSIS® 3.0 systems and builds on the successful heritage of TriQuint's TGA2806-SM & TGA2803-SM. The new device offers ACPR ~2 dB better than previous generations for given bias & power levels; it can be operated at significantly reduced power...
Read More »Difference Amplifier targets automotive applications.
Delivering minimum CMRR of 80 db from dc to 10 kHz, Model AD8209 is suited for amplifying and low-pass filtering small differential voltages in presence of large common-mode voltage. Input common-mode voltage range extends from -2 to +45 V at single +5 V supply, and typical offset and gain drift are less than 5 Â-µV/°C and 10 ppm/°C, respectively. Qualified per AEC-Q100...
Read More »Precision Dual Amplifiers feature 12 MHz bandwidth.
Designed on iPolar(TM) process, Models ADA4004-1/ADA4004-2/ADA4004-4 are 1.8 nV/√Hz precision amplifiers featuring 40 Â-µV offset, 0.7 µV/°C drift, and supply current of 1.7 mA per amplifier. Operation is fully specified from ±5 to ±15 V from -40 to +125°C. Applications include high precision controls, PLL filters, medical and analytical instrumentation,...
Read More »Class-D Audio Amplifiers target home entertainment systems.
Providing 300 W stereo or 600 W mono output power at greater than 88% efficiency, Models TAS5630 and TAS5631 are available in analog-input and PWM-input configurations, respectively. THD of 0.03% at 1 W into 4 W load provides ultra-low distortion at normal listening levels. With PurePath HD technology and audio bandwidth exceeding 73 kHz, units can achieve high-definition media playback in AV and...
Read More »
Do You Have Unique Lifting Needs?
EZRig Cranes offers lifting solutions that are engineered for robust performance, providing the ultimate in portability. Designed for real-world lifting needs, our products are small and light with options and features that make them ideal for a broad range of applications. See our video to learn how an EZRig Crane can simplify your lifting requirements.
Read More »
