Electronic Amplifiers

Electronic Amplifiers

Differential Amplifier drives gigasample ADCs.

Model ADA4960-1 is 5 GHz differential amplifier that drives high-speed ADCs with 10 bit linearity to 500 MHz and ADCs with 8 bit linearity up to 1 GHz. Consuming just 60 mA of quiescent current when operating up to 1 GHz, amplifier features a 8,700 V/Â-µsec slew rate of AV=6 dB, 2 V pk-pk output. Along with settling time of 1 nsec to 1% and overdrive recovery of 10 nsec, ADA4960-1 features...

Read More »
Electronic Amplifiers

Thermocouple Amplifiers feature cold junction compensation.

Designed for K- and J-type thermocouples, Series AD849x includes 4 models that convert small voltages generated by thermocouple junction into 5 mV/°C analog signal that can be read by ADC or microcontroller. Common-mode rejection of 0.1°C/V allows devices to reject common-mode noise that may be associated with long lead thermocouples. Operating off variety of voltages from single 2.7...

Read More »
Digital Charge Amplifier features integrated Ethernet interface.
Electronic Amplifiers

Digital Charge Amplifier features integrated Ethernet interface.

Equipped with 2 digital outputs, Model CMD600 acquires signals from connected piezoelectric sensor and makes them available to downstream machine control as analog voltage signal from 0 to ±10 V up to measuring bandwidth of 30 kHz, or in digital form as measured value streaming, via Ethernet. Sensitivity and measuring range can be adjusted using software, without loss of accuracy, in range...

Read More »
RF Power Amplifier delivers 150 W over 1.75-1.85 GHz range.
Electronic Amplifiers

RF Power Amplifier delivers 150 W over 1.75-1.85 GHz range.

Offered as PCB housed in machined aluminum enclosure, Model KMS2010 solid-state linear power amplifier suitable for wireless broadband networks offers 52 dBm linear power with scalable gain of 57 dB. Module is designed to meet needs of most communication protocols, including various types of OFDM. Featuring internal isolator, amplifier is protected from thermal overload, over-power, over-voltage,...

Read More »
Electronic Amplifiers

Digital Variable Gain Amplifiers suit wireless infrastructure components.

Available in wideband and narrowband versions covering all 2G, 3G, and 4G standards for base station frequency bands, 6-bit RFDA Series integrates high linearity amplifiers with digital step attenuator and optional serial to parallel converter. Digitally controlled variable gain amplifiers offer gain up to 38 dB, OIP3 up to 43 dBM, and max operating frequency up to 4 GHz. Components are suitable...

Read More »
Electronic Amplifiers

Fully Tested Power Amplifier IC is optimized for WiMAX.

Integrating 3-stage PA and power detector in 4 x 4 mm QFN package, RF5633 works from 5 V supply and is fully DC and RF tested. It delivers EVM of 2.5% with output power of 28 dBm from 3.4-3.6 GHz or 27 dBm from 3.6-3.8 GHz and features InGaP HBT semiconductor technology. External match enables tuning for output power over multiple bands, and bias may be controlled to accommodate 22 dB gain step....

Read More »
Power Amplifiers target femtocell markets.
Electronic Amplifiers

Power Amplifiers target femtocell markets.

Operating in 3G frequency bands, Model AWB7123 supports UMTS band 2 in North America, while Model AWB7127 supports band 1 in Europe, Asia, and parts of South America. Both support multi-carrier scenarios and complex modulation schemes, such as those used in WCDMA, HSDPA, and LTE air interfaces. Delivering up to +24.5 dBm of WCDMA power with ACPR of -50 dBc, devices incorporate RF matching...

Read More »
Digital Amplifier Module controls brushless DC motor speed.
Electronic Amplifiers

Digital Amplifier Module controls brushless DC motor speed.

Designed for controlling brushless DC motors with Hall sensors up to 250 W, DEC module 50/5 controller features operating voltage of up to 50 Vdc and output current of 5 A in continuous operation. Amplifier offers large number of I/O, including enable, speed ranges, speed monitor, direction of rotation presetting, current limiting, and operating status. Measuring 3 x 4 cm, OEM module integrates...

Read More »
Electronic Amplifiers

Programmable Class-D Stereo, Mono Amplifiers suit portable devices.

Model TPA2026D2 stereo Class-D amplifier drives 3.2 W/channel into 4 W at 5 V, and is available in 2.2 x 2.2 mm, 0.5 mm pitch WCSP. Offered in 1.63 x 1.63 mm, 0.5 mm pitch WCSP, TPA2028D1 mono Class-D unit drives 3 W/channel into 4 W at 5 V. Both have SmartGain(TM) automatic gain control and programmable SmartGain dynamic range compression with selectable compression ratios for up to 30 dB gain....

Read More »
Electronic Amplifiers

High-Speed Operational Amplifier delivers low-noise performance.

Supplied in 8-pin LLP®, PowerWise® LMH6629 delivers 0.69 nV/sqrt Hz noise with -3 dB bandwidth of 900 MHz at gain of 10. It also provides input current noise of 2.6 pA/sqrt Hz as well as respective second and third harmonic distortion performance of -90 and -94 dBc. Combined with low DC errors, characteristics enable precision operation in AC- and DC-coupled applications. Input...

Read More »

All Topics