Headphone Amplifier facilitates sound quality testing.
Supporting listening panels for up to 12 people, Model ZE-0769-004 is suited for sound evaluation during design phase, prototype evaluation, or troubleshooting of new vehicles. Since absolute level has direct effect on juror preference, headphone amplifier is designed to give same level in all channels and has stepped gain control to accurately return to previous setting. Amplifier produces exact...
Read More »Broadband Microwave Power Amplifiers cover bandwidths up to 40 GHz.
Model GT-1020A Instrument-Grade Broadband Microwave Power Amplifiers, covering 100 MHz to 20 GHz frequencies, and GT-1040A models, covering 10 MHz to 40 GHz, have flat frequency response, low noise figure, and low harmonics. Solid-state amplifiers provide Â-½ W at 20 GHz and ¼ W at 40 GHz with greater than 25 dB gain and less than 6 dB noise figure. Gain flatness is typically...
Read More »Low-Noise Precision Op Amps are suited for sensor measurement.
With max input bias current of 0.9 pA, 1.8 V OPAx320 series includes 2-channel OPA2320 which provides 20 MHz gain bandwidth and 0.2 pA input bias current. With zero crossover distortion, product delivers max offset voltage of 150 Â-µV, high common mode rejection rate of 114 dB, and rail-to-rail I/O to drive low-power, successive approximation ADCs up to 1 MS/sec. Noise figure is 7 nV/rtHz at...
Read More »Low Noise Amplifiers target GPS-enabled applications.
Housed in 0.86 x 0.86 x 0.4 mm-pitch WLP with 4 pins, Models MAX2686/MAX2688 support applications operating in 1,575 MHz band. Noise figure of 0.75 dB optimizes receive sensitivity over discrete and highly integrated CMOS solutions, while operating supply current of 4 mA extends battery life in equipment. When LNAs are not in use, optional logic-enabled shutdown mode reduces supply current to...
Read More »
Corrosive/Ultrapure Fluid Heat Exchanger Coils - Choosing the Right Strategy
Check out this white paper to learn which heat exchanger types are the best for high temperature performance in chemically aggressive applications.
Read More »Logarithmic/Limiting Amplifier features 75 dB dynamic range.
Model PS13201 Logarithmic/Limiting Amplifier operates in 100-500 MHz frequency range, with 75 dB dynamic range, and also features balanced RF output. Product includes on-chip video amplifier with provision for external adjustment of log slope and offset. Operating over military temperature range of -55 to +125°C, unit is suitable for use in wideband logarithmic receivers and both...
Read More »Current-Sense Amplifiers feature I2C output.
Housed in 10-pin uMAX® package, Models MAX9611/MAX9612 integrate I2C-controlled, 12-bit, 500 sps ADC for reading sense-resistor current, input common-mode voltage, op-amp/comparator output, op-amp/comparator reference voltage, and internal die temperature. I2C bus is compatible with 1.8 and 3.3 V logic, providing direct interface for microcontrollers. Featuring input common-mode voltage...
Read More »Class-G Amplifier targets media players and mobile handsets.
Integrating DAC and power rails, Model TLV320DAC3202 features digital input IÂ-²S and integrated clocking system that delivers 100 dB SNR at 6.5 mW power dissipation. Power management technology facilitates seamless operation between battery and switched mode input voltage supply for efficient playback. With 2 x 2.5 mm footprint, standalone headset driver offers optimal PSRR, enabling direct...
Read More »
Regenerative Amplifier delivers over 5 W at up to 10 kHz.
Spitfire® Ace(TM) regenerative amplifier delivers average power of more than 5 W at 1, 5, and 10 kHz with beam quality of M2 less than 1.3. Suitable for use with Mai Tai® seed laser and Empower® pump laser platforms, unit performs optimally when used with Mai Tai SP oscillator. System is designed for pumping multiple optical parametric amplifier systems and performing range of...
Read More »
AR-50 Booster Amplifier Receives JITC Certification
Bothell, WA - AR Modular RF has received JITC Certification on it's AR-50 booster amplifier. The 50-watt, automatic tuning, multi-band tactical booster amplifier (30 - 512 MHz) has been tested and certified for conformance to applicable Military Standard (MIL-STD). The AR-50 booster amplifier boosts tactical radio signals from handheld and back-pack transceivers operating in the 30 - 512 MHz...
Read More »Matrox Brings Leading-Edge Collaborative Display Wall and KVM Extension Technologies to ISE 2011
Matrox Mura, Extio F2408 and M-Series graphics solutions to drive innovative, multi-display platforms for AV environments Montreal, Canada-Matrox Graphics Inc. will be showcasing its latest multi-display technologies for mid- to large-scale AV environments at Integrated System Europe (ISE) 2011, in Amsterdam, Netherlands (Booth# 11F48, Hall 11). Matrox invites ISE attendees to visit the Matrox...
Read More »
Trotec Laser Offers Customizable Industrial Laser Marking Solutions for Any Application
Trotec's laser marking solutions provide your company with configurable workstations and intuitive, customizable software. Check out our video to learn more.
Read More »
