L-Band Amplifier features positive slope equalization. .
Designed for Q-Flex 4RU modular chassis, Model QLA 2150 operates over 950-2,150 MHz frequency range and provides variable gain and slope compensation to optimize L-band signal strength through long cable runs and distribution networks. Compact line amplifier operates on +24 V power supply with 75 W impedance and gain range of 0 to +18 dB in 1 dB steps.
Read More »NuPower(TM) L- & S-Band Solid State Power Amplifier
Middletown, Ohio, - NuWaves Engineering, an international communications company, has expanded their NuPower(TM) series of power amplifiers with the introduction of the L-&S-Band PA. NuWaves' NW-SSPA-15W-1.0-2.6 is a high performance solid state power amplifier delivering 15 watts across the frequency band of 1.0 GHz to 2.6 GHz. The small form factor of 3.9 cubic inches brings state-of-the-art...
Read More »
Digital PWM Servo Amplifiers come in various packages.
Enabling OEM designers to accommodate range of motion applications, VSA series offers various power ranges and package options: DC powered module, AC powered stand-alone, and multi-axis baseplates. These are designed to drive 3-phase brushless motors, single-phase brush-type motors, and voice coils. Powered from 20-340 Vdc or 80-240 Vac source, products can provide up to 15 A continuous and 30 A...
Read More »Giga-Tronics Introducing New Instrument-Grade Broadband Microwave Power Amplifiers at European Microwave
Giga-tronics introducing new Instrument-Grade Broadband Microwave Power Amplifiers at European Microwave SAN RAMON, Calif. - Giga-tronics announced it will be introducing its new Instrument-Grade Broadband Microwave Power Amplifiers at the European Microwave Conference in Manchester England. The conference and exhibition held from October 9th thru October 14th hosts an international attendance...
Read More »
Metal Finishing Selection Guide
This unique chart compares different metal finishes by cost, corrosion resistance, applications and more.
Read More »Cellphone-Mate®, Inc. Announces First FCC Approved, 4G LTE Single-Band Amplifier for the AT&T Network, the CM700A
Follows LTE and 4G Amplifiers for Verizon and T-Mobile Networks introduced in July and March 2011, making Cellphone-Mate the most complete 4G cellular amplification provider FREMONT, Calif., -- Cellphone-Mate (www.Cellphone-Mate.com) a leading provider of cell phone amplifiers and accessories, today announced that it is introducing the first FCC approved, 4G LTE amplifier for the AT&T network....
Read More »
ENERGY STAR® Qualified Amplifiers have convection cooled design.
Used in commercial environments where multiple speakers need to be run from one amplifier, convection-cooled AMP Series helps meet energy savings objectives without sacrificing audio performance. Each channel is selectable for 210 W @ 4 ohms or 120 W @ 8 ohms and isolated 120 W at 70 or 100 V. Delivering low-noise, low-distortion performance, amplifiers have automatic shut-off and turn-on...
Read More »Current Source Amplifiers serve as drop-in Maxim replacements.
Supplied in 5-pin SOT23 packaging, TSM9938F and TSM9634F are pin-compatible and functionally identical to Maxim Integrated Products' analog ICs. Both current-sense amplifiers operate from +1.6 to +28 V, consume no more than 1 Â-µA supply current and offer 50 V/V fixed gain option. They are designed for battery monitoring/management, power management applications, over-current and fault...
Read More »STMicroelectronics Further Extends Its Range of Rad-Hard Analog Products for Aerospace
Full QML V qualification achieved for innovative family of analog amplifiers STMicroelectronics Further Extends its Range of Rad-Hard Analog Products for Aerospace Full QML V qualification achieved for innovative family of analog amplifiers GENEVA - STMicroelectronics (NYSE: STM), a global semiconductor leader serving customers across the spectrum of electronics applications and a world leader in...
Read More »Optical Fiber Amplifiers are compact, and power-efficient.
HYDRA series allows for up to 4 independent, low-noise amplifiers in one 19 in. benchtop enclosure or 10 x 12 x 3 cm form factor optical module. Products can be fully customized in terms of port-count and output power, and both C- and L-band amplification are offered. Series suits telecom equipment manufactures and R/D labs that require numerous, low-noise amplifiers for use in large-scale...
Read More »Automotive-Qualified 36 V Op Amp is offered in compact package.
Able to operate on supplies from +2.7 to +36 V, OPA171-Q1 single-supply, low-noise op amp remains stable when exposed to capacitive loads up to 300 pF or when input operates 100 mV below negative rail and within 2 V of top rail during normal operation. Characteristics include up to 1.8 mV offset, 0.3 Â-µV/C typ drift, 3 MHz gain bandwidth, and 475 µA quiescent current. In addition to...
Read More »
Dodge® Raptor Coupling Now Available in Three Larger Sizes
The Dodge Raptor coupling epitomizes the innovation and value that has made Baldor a world leader in industrial electric motors. For almost 100 years Baldor has been the go-to source for industries across the globe. The Raptor coupling is just one example of our dedication to engineered excellence and commitment to providing value and performance. See our video to learn more.
Read More »
