Electronic Amplifiers

Electronic Amplifiers

NuPower(TM) L- & S-Band Solid State Power Amplifier

Middletown, Ohio, - NuWaves Engineering, an international communications company, has expanded their NuPower(TM) series of power amplifiers with the introduction of the L-&S-Band PA. NuWaves' NW-SSPA-15W-1.0-2.6 is a high performance solid state power amplifier delivering 15 watts across the frequency band of 1.0 GHz to 2.6 GHz. The small form factor of 3.9 cubic inches brings state-of-the-art...

Read More »
Digital PWM Servo Amplifiers come in various packages.
Electronic Amplifiers

Digital PWM Servo Amplifiers come in various packages.

Enabling OEM designers to accommodate range of motion applications, VSA series offers various power ranges and package options: DC powered module, AC powered stand-alone, and multi-axis baseplates. These are designed to drive 3-phase brushless motors, single-phase brush-type motors, and voice coils. Powered from 20-340 Vdc or 80-240 Vac source, products can provide up to 15 A continuous and 30 A...

Read More »
Electronic Amplifiers

Giga-Tronics Introducing New Instrument-Grade Broadband Microwave Power Amplifiers at European Microwave

Giga-tronics introducing new Instrument-Grade Broadband Microwave Power Amplifiers at European Microwave SAN RAMON, Calif. - Giga-tronics announced it will be introducing its new Instrument-Grade Broadband Microwave Power Amplifiers at the European Microwave Conference in Manchester England. The conference and exhibition held from October 9th thru October 14th hosts an international attendance...

Read More »
Electronic Amplifiers

Cellphone-Mate®, Inc. Announces First FCC Approved, 4G LTE Single-Band Amplifier for the AT&T Network, the CM700A

Follows LTE and 4G Amplifiers for Verizon and T-Mobile Networks introduced in July and March 2011, making Cellphone-Mate the most complete 4G cellular amplification provider FREMONT, Calif., -- Cellphone-Mate (www.Cellphone-Mate.com) a leading provider of cell phone amplifiers and accessories, today announced that it is introducing the first FCC approved, 4G LTE amplifier for the AT&T network....

Read More »
How to Choose the Right Adhesive Tape for Your Application
Sponsored

How to Choose the Right Adhesive Tape for Your Application

With a considerable number of adhesive materials, applications and methods, there are many options to consider when choosing an adhesive tape. As NADCO® is a leading manufacturer of custom tapes and labels; we took our years of experience to create this handy selection guide on choosing the right adhesive tape for your application.

Read More »
ENERGY STAR® Qualified Amplifiers have convection cooled design.
Electronic Amplifiers

ENERGY STAR® Qualified Amplifiers have convection cooled design.

Used in commercial environments where multiple speakers need to be run from one amplifier, convection-cooled AMP Series helps meet energy savings objectives without sacrificing audio performance. Each channel is selectable for 210 W @ 4 ohms or 120 W @ 8 ohms and isolated 120 W at 70 or 100 V. Delivering low-noise, low-distortion performance, amplifiers have automatic shut-off and turn-on...

Read More »
Electronic Amplifiers

Current Source Amplifiers serve as drop-in Maxim replacements.

Supplied in 5-pin SOT23 packaging, TSM9938F and TSM9634F are pin-compatible and functionally identical to Maxim Integrated Products' analog ICs. Both current-sense amplifiers operate from +1.6 to +28 V, consume no more than 1 Â-µA supply current and offer 50 V/V fixed gain option. They are designed for battery monitoring/management, power management applications, over-current and fault...

Read More »
Electronic Amplifiers

STMicroelectronics Further Extends Its Range of Rad-Hard Analog Products for Aerospace

Full QML V qualification achieved for innovative family of analog amplifiers STMicroelectronics Further Extends its Range of Rad-Hard Analog Products for Aerospace Full QML V qualification achieved for innovative family of analog amplifiers GENEVA - STMicroelectronics (NYSE: STM), a global semiconductor leader serving customers across the spectrum of electronics applications and a world leader in...

Read More »
Electronic Amplifiers

Optical Fiber Amplifiers are compact, and power-efficient.

HYDRA series allows for up to 4 independent, low-noise amplifiers in one 19 in. benchtop enclosure or 10 x 12 x 3 cm form factor optical module. Products can be fully customized in terms of port-count and output power, and both C- and L-band amplification are offered. Series suits telecom equipment manufactures and R/D labs that require numerous, low-noise amplifiers for use in large-scale...

Read More »
Electronic Amplifiers

Automotive-Qualified 36 V Op Amp is offered in compact package.

Able to operate on supplies from +2.7 to +36 V, OPA171-Q1 single-supply, low-noise op amp remains stable when exposed to capacitive loads up to 300 pF or when input operates 100 mV below negative rail and within 2 V of top rail during normal operation. Characteristics include up to 1.8 mV offset, 0.3 Â-µV/C typ drift, 3 MHz gain bandwidth, and 475 µA quiescent current. In addition to...

Read More »
Electronic Amplifiers

Mini-Circuits New High-Linearity Amplifier Fills Next-Generation DOCSIS Demands for CATV Return Path

Mini-Circuits is extending the industry's broadest lineup of RF/IF and Microwave components with the new ZHL-22LM-75+ coaxial 75 W amplifier. Featuring ultra low second- and third-order distortion products, a noise figure of 3.7 dB, and typical output power of +25 dBm from 5 to 200 MHz, the ZHL-22LM-75+ helps cable operators provide the multiple upstream channels required under DOCSIS 3.0...

Read More »

All Topics