Electronic Amplifiers

Electronic Amplifiers

WCDMA/LTE Power Amplifiers offer low- and high-power efficiency.

ProEficient(TM) WCDMA/LTE power amplifiers maximize talk time in low-power mode while allowing long-term data application use in high-power mode. Suitable for smartphones and tablet devices, units maximize 4G battery-life without use of DC-DC converter. Depending on model, amplifiers operate over frequency ranges of 880-915 MHz to 1,920-1,980 MHz, and in bands 1, 2, 3/4/9/10, 5, and 8. Products,...

Read More »
Electronic Amplifiers

Nuwaves Engineering Introduces Three New Miniaturized RF Products at the 2012 International Microwave Symposium

Montreal, Canada- NuWaves Engineering of Middletown, Ohio, an international Radio Frequency (RF) solutions company, will be unveiling three miniature, high-performance RF products at IEEE's 2012 International Microwave Symposium (IMS) including the company's first broadband low noise amplifier covering C band to X band, and two different sub-2 cubic inch solid state power amplifiers covering VHF...

Read More »
Integrated Circuits use 1.5 µA Icc max.
Electronic Amplifiers

Integrated Circuits use 1.5 µA Icc max.

Operating down to 0.65 V, Models TS12011 and TS12012 combine 0.6 V reference, 20 -µs analog comparator, and unity-gain stable op amp in 4 mm-² package. Model TS12011 has push-pull output, while Model TS12012 has open-drain output. Both analog comparator and op amp feature rail-to-rail input stages, and analog comparator has -

Read More »
Electronic Amplifiers

Analog Devices¡¯ Video Amplifiers Integrate Short-to-Battery Protection and Fault Detection for Automotive Video Applications

NORWOOD, Mass - Analog Devices, Inc. (ADI), a global leader in high-performance signal processing technology, today introduced a series of high-speed video amplifiers that integrate short-to-battery protection and fault detection for analog video systems in automotive safety and infotainment applications. Housed in 3mm x 3mm packages, ADI-¡-¯s new integrated video amplifiers reduce board space...

Read More »
Electronic Amplifiers

ANADIGICS to Showcase Cutting-Edge 4G Solutions at IMS2012

ANADIGICS to Exhibit June 19-21, 2012 at the International Microwave Symposium in Montreal, Canada WARREN, N.J. - ANADIGICS, Inc. (Nasdaq: ANAD), a world leader in radio frequency (RF) solutions, today announced that it will participate in the IEEE International Microwave Symposium in Montreal, Canada. ANADIGICS plans to showcase several new high performance products at the event, including LTE...

Read More »
Richardson RFPD Introduces New W-Band Low Noise Amplifier from UMS
Electronic Amplifiers

Richardson RFPD Introduces New W-Band Low Noise Amplifier from UMS

Balanced, Four-Stage Device Covers 80-105 GHz Frequency Range LaFox, Illinois: Richardson RFPD, Inc. today introduces a new 80-105 GHz balanced low noise amplifier (LNA) from United Monolithic Semiconductors S.A.S. (UMS). The CHA1008-99F is a broadband, four-stage monolithic LNA designed for millimeter-wave imaging applications and is also well-suited for commercial digital radios and wireless...

Read More »
Low-Noise MMIC Amplifiers have 1.5 dB noise figure.
Electronic Amplifiers

Low-Noise MMIC Amplifiers have 1.5 dB noise figure.

Designed for 6-18 GHz applications, GaAs MMIC low-noise amplifiers come in 2 models: CMD157 die and CMD157P3 leadless 3 x 3 mm plastic SMT package. Both units are 50 W matched designs, deliver greater than 25 dB of flat gain, and have corresponding output 1 dB compression point of +10 dBm. Biased with single positive voltage of +3.0 V @ 52 mA, devices can be used with RF power. They are suited...

Read More »
Electronic Amplifiers

C-Band GaAs FETs target microwave radios and BUCs.

Respectively operating in 5.3-5.9 GHz and 5.9-6.4 GHz range, TIM5359-16EL and TIM5964-16EL C-Band gallium arsenide field effect transistors (GaAs FETs) offer output power, at 1 dB gain compression point, of 16 W or 42.5 dBm typ; linear gain of 11.5 dB typ; and power added efficiency of 38%. Products targeting microwave radios support point-to-point and point-to-multipoint terrestrial...

Read More »
Tunable RF Driver Amplifier (1 W) is optimized for linearity.
Electronic Amplifiers

Tunable RF Driver Amplifier (1 W) is optimized for linearity.

Intended for MILCOM and infrastructure applications, MAAM-010617 comes in Pb-free SOT-89 package and is tunable over 30-4,000 MHz range to optimize performance based on end requirements. This 30 dBm GaAs MMIC amplifier, biased with single +5 V supply, has quiescent current of 420 mA and is fabricated using HBT process. Operating bandwidth can be optimized with selective off-chip components....

Read More »
Electronic Amplifiers

ANADIGICS Powers Huawei Honor

ANADIGICS' HELP(TM)4 Power Amplifiers Help Extend Battery-Life for the Huawei Honor WCDMA Smartphone WARREN, N.J. - ANADIGICS, Inc. (Nasdaq: ANAD), a world leader in radio frequency (RF) solutions, today announced that the Company is shipping production volumes of its AWT6621 fourth generation High-Efficiency-at-Low-Power (HELP(TM)4) WCDMA power amplifiers (PAs) to Huawei Technologies Co., Ltd....

Read More »

All Topics