Electronic Amplifiers

Electronic Amplifiers

Nitronex Awarded Phase I SBIR from Nasa to Research X- and Ka- Band GaN Power Amplifiers

Nitronex wins additional X/Ka-Band funding DURHAM, NC - Nitronex, a leader in the design and manufacture of gallium nitride (GaN) based RF solutions for high performance applications in the defense, communications, cable TV, and industrial & scientific markets, has been awarded a Phase I SBIR to develop a highly efficient 20W X-band GaN power amplifier MMIC for use in long range RF...

Read More »
Electronic Amplifiers

Swiss Broadcasting Corporation Opts for SKYWAN Technology from Astrium

Friedrichshafen- The Swiss Broadcasting Corporation (SRG SSR) has selected Astrium Services' ND SatCom product range to upgrade its fleet of Satellite News Gathering vehicles (SNGs) used for the Swiss national media coverage. The 5 SNGs will start running in the summer of 2012 and will be equipped with state-of-the-art remote functionality and editing capabilities so that reports and news...

Read More »
Releasing the Music in the Golden Gate Bridge
Electronic Amplifiers

Releasing the Music in the Golden Gate Bridge

Using accelerometers, microphones, speakers and amplifiers - for uses that their designers surely never foresaw - composer Bill Fontana has been making sound art since the 1970s. Trained as a composer, he soon found an interest in the physics of sound, and in the music inherent in the sounds of everyday life, as well as the developing world of modern music that uses sounds created with...

Read More »
Ka-Band LNA MMIC has 1.7 dB noise figure, low power dissipation.
Electronic Amplifiers

Ka-Band LNA MMIC has 1.7 dB noise figure, low power dissipation.

For applications from 26-34 GHz, CMD162 GaAs monolithic microwave integrated circuit (MMIC) low-noise amplifier (LNA) chip has 1.7 dB typ noise figure with small-signal gain of 22 dB and output 1 dB compression point of +7 dB. Performance and efficiency reduces typical industry DC power dissipation for device in this frequency band from ~340 mW down to 50 mW. Device only requires positive drain...

Read More »
Electronic Amplifiers

RF Driver Amplifier IC features dynamically adjustable bias.

Operating over temperature range of -40 to +105°C, Â-½ Watt Model ADL5324 can be biased from 3.3-5 V, enabling RF designer to adjust power consumption to required system performance without need for bias resistor. Device features low power consumption of 62 mA on 3.3 V and up to 133 mA on 5 V. Available in SOT-89 package, amplifier operates over frequency range of 400-4,000 MHz with...

Read More »
Servo Amplifier offers power density of 250 W at 12 cm².
Electronic Amplifiers

Servo Amplifier offers power density of 250 W at 12 cm².

With operating voltage up to 50 Vdc and output current of 5 A in continuous operation, DEC Module 50/5 controls brushless DC motors with Hall sensors up to 250 W. Digital servo amplifier offers variety of inputs and outputs, including enable, speed ranges, speed monitor, direction of rotation presetting, current limiting, and operating status. Integrated overcurrent, undervoltage/overvoltage,...

Read More »
Design Embraces Functionality - Bosch Supplies Public Address and Evacuation System to Major Turkish Airport
Electronic Amplifiers

Design Embraces Functionality - Bosch Supplies Public Address and Evacuation System to Major Turkish Airport

To ensure clear and reliable passenger communication at all times and all over its large area, the International Terminal of the Adnan Menderes Airport, Turkey, relies on technology from Bosch. Since its installation by the Bosch partner Ateksis, the Praesideo fully digital public address and voice evacuation system allows the broadcast of different live and pre-recorded messages in 100 different...

Read More »
High-Side Current-Sense Amplifiers consume just 1 µA.
Electronic Amplifiers

High-Side Current-Sense Amplifiers consume just 1 µA.

Available in 4 gain options from 25-200 V/V, TS1101 Series features symmetrical architecture that eliminates dead band when switching from measuring battery discharge to measuring battery charge. Bidirectional devices have input common mode range of +2 to +25 V, input offset voltage of 100 Â-µV, and low gain error of less than 0.6%. Housed in 6-lead SOT23 package, amplifiers are suited for...

Read More »
In-Line Charge Amplifier suits high-temperature applications.
Electronic Amplifiers

In-Line Charge Amplifier suits high-temperature applications.

Designed for use with high-temperature charge mode accelerometers, Model 4753B is powered using constant current sources and is compatible with IEPE designated instrumentation. Miniature device can accept sensors with insulation resistance as low as 100 kW without deterioration in performance. Offered with 10-32 jack input connector and BNC jack output connector, Model 4753B features 10 mV/pC...

Read More »
Electronic Amplifiers

GNSS Receiver and Amplifier have automotive-grade design.

Designed for GNSS applications, MAX2769B and MAX2670 feature PPAP and AEC-Q100 approvals and operate over navigation standards: GPS, GLONASS, Galileo, and Compass. Dual-stage low noise amplifier, MAX2670, is typically located in or close to antenna module, while MAX2769B resides within dashboard as receiver and has noise figure of 1.4 dB. MAX2670's design allows external filtering between first...

Read More »
Dies & Stamping Services with Over 25 Years of Experience
Sponsored

Dies & Stamping Services with Over 25 Years of Experience

PDS is an established leader in progressive die stamping, with a reputation for providing precision and value that dates back more than half a century. Through extensive capabilities and a staff of seasoned professionals, we set the standard for quality, delivering flexible services that can meet the needs of the most challenging requirements. See our video to learn more.

Read More »

All Topics