Electronic Amplifiers

Richardson RFPD Introduces New W-Band Low Noise Amplifier from UMS
Electronic Amplifiers

Richardson RFPD Introduces New W-Band Low Noise Amplifier from UMS

Balanced, Four-Stage Device Covers 80-105 GHz Frequency Range LaFox, Illinois: Richardson RFPD, Inc. today introduces a new 80-105 GHz balanced low noise amplifier (LNA) from United Monolithic Semiconductors S.A.S. (UMS). The CHA1008-99F is a broadband, four-stage monolithic LNA designed for millimeter-wave imaging applications and is also well-suited for commercial digital radios and wireless...

Read More »
Low-Noise MMIC Amplifiers have 1.5 dB noise figure.
Electronic Amplifiers

Low-Noise MMIC Amplifiers have 1.5 dB noise figure.

Designed for 6-18 GHz applications, GaAs MMIC low-noise amplifiers come in 2 models: CMD157 die and CMD157P3 leadless 3 x 3 mm plastic SMT package. Both units are 50 W matched designs, deliver greater than 25 dB of flat gain, and have corresponding output 1 dB compression point of +10 dBm. Biased with single positive voltage of +3.0 V @ 52 mA, devices can be used with RF power. They are suited...

Read More »
Electronic Amplifiers

C-Band GaAs FETs target microwave radios and BUCs.

Respectively operating in 5.3-5.9 GHz and 5.9-6.4 GHz range, TIM5359-16EL and TIM5964-16EL C-Band gallium arsenide field effect transistors (GaAs FETs) offer output power, at 1 dB gain compression point, of 16 W or 42.5 dBm typ; linear gain of 11.5 dB typ; and power added efficiency of 38%. Products targeting microwave radios support point-to-point and point-to-multipoint terrestrial...

Read More »
Tunable RF Driver Amplifier (1 W) is optimized for linearity.
Electronic Amplifiers

Tunable RF Driver Amplifier (1 W) is optimized for linearity.

Intended for MILCOM and infrastructure applications, MAAM-010617 comes in Pb-free SOT-89 package and is tunable over 30-4,000 MHz range to optimize performance based on end requirements. This 30 dBm GaAs MMIC amplifier, biased with single +5 V supply, has quiescent current of 420 mA and is fabricated using HBT process. Operating bandwidth can be optimized with selective off-chip components....

Read More »
Electronic Amplifiers

ANADIGICS Powers Huawei Honor

ANADIGICS' HELP(TM)4 Power Amplifiers Help Extend Battery-Life for the Huawei Honor WCDMA Smartphone WARREN, N.J. - ANADIGICS, Inc. (Nasdaq: ANAD), a world leader in radio frequency (RF) solutions, today announced that the Company is shipping production volumes of its AWT6621 fourth generation High-Efficiency-at-Low-Power (HELP(TM)4) WCDMA power amplifiers (PAs) to Huawei Technologies Co., Ltd....

Read More »
Electronic Amplifiers

AmpliVox Launches "the 12 for 2012!" New Product Line Up

Innovative New Products Expand Across Several Lines. NORTHBROOK, Ill. - AmpliVox Sound Systems, engineers, manufacturers and marketers of sound system technology, announced today The 12 for 2012!" product line-up, a landmark expansion of its offerings by introducing 12 new products. The new products include elegant lecterns and podiums, high-tech public safety sound systems, and versatile audio...

Read More »
Electronic Amplifiers

ANADIGICS Powers Several New ZTE Smartphones

ANADIGICS' HELP(TM)4 Power Amplifiers Enable Several New ZTE Android Smartphones WARREN, N.J. - ANADIGICS, Inc. (Nasdaq: ANAD), a world leader in radio frequency (RF) solutions, today announced that the Company is shipping production volumes of its AWT6621, AWT6624, AWT6625A, and AWT6628A fourth generation High-Efficiency-at-Low-Power (HELP(TM)4) power amplifiers (PAs) to ZTE for the V889D,...

Read More »
Electronic Amplifiers

Digital Variable Gain Amplifier delivers 31.5 dB gain control.

Supplied in 5 x 5 x 1 mm case, DVGA1-242+ includes serial-controlled attenuator using CMOS-on-silicon technology together with broadband GaAs amplifier. Latter delivers up to 30 dB gain, IP3 as high as 37 dBm, POUT of 23 dBm, and noise figure as low as 2.5 dB. product offers precision, high-speed gain control for cellular, wLAN, satellite, military, and radar applications.

Read More »
Electronic Amplifiers

Solid-State Power Amplifiers provide up to 160 W output.

Requiring single supply voltage, GaN-based AGN and AGW Series serve RF and microwave applications such as commercial, industrial, and military radar. There are 15 models for narrowband applications, operating from 7.8-10.7 GHz in continuous wave (CW) mode; 12 models for narrowband (less than 10% bandwidth) applications, operating from 8.5-10.7 GHz in pulsed mode; and 12 models for wideband and...

Read More »
Remote In-Line DC Amplifier includes auto-zero function.
Electronic Amplifiers

Remote In-Line DC Amplifier includes auto-zero function.

Designed to be used with bridge-type mV output transducers, Model 140 features 5 user-selectable gain settings with gain accuracy of ±0.5% and bandwidth to 100 kHz. Auto-zero function allows operator to zero transducer offset voltage to within ±1.5 mV, either remotely or by pressing on-board push button at user's command. Packaged in anodized aluminum housing that is sealed against...

Read More »
Dodge® Raptor Coupling Now Available in Three Larger Sizes
Sponsored

Dodge® Raptor Coupling Now Available in Three Larger Sizes

The Dodge Raptor coupling epitomizes the innovation and value that has made Baldor a world leader in industrial electric motors. For almost 100 years Baldor has been the go-to source for industries across the globe. The Raptor coupling is just one example of our dedication to engineered excellence and commitment to providing value and performance. See our video to learn more.

Read More »

All Topics