Electronic Amplifiers

Electronic Amplifiers

Analog Devices Unveils New RF and Microwave Innovations at IMS2013

-New microwave power detector, integrated RF mixer and VGA offer high levels of integration and set new performance benchmarks. IMS2013 International Microwave Symposium Booth #2411 NORWOOD, Mass.--Analog Devices, Inc. (ADI) today introduced three RF and microwave ICs designed for high-performance transmitters and receivers used in high-dynamic-range applications, such as wireless infrastructure,...

Read More »
Electronic Amplifiers

RF Power Amplifier is suited for 3G/4G small-cell base stations.

Operating in 2,100–2,170 MHz frequency band, ASC7517 delivers 1.4 W of power using 2.85Â- and 5 V supply while operating with power efficiency of 28%. Multistage PA, used in predistortion system, uses Doherty architecture and supports ACLR requirements of WCDMA, HSPA, and LTE systems without compromising efficiency. Product also provides 42 dB of RF...

Read More »
Electronic Amplifiers

WiFi Chipset Solutions deliver near 600 Mbps throughput.

Comprising 2x2 802.11ac WiFi chipset solutions, MT7612x series includes fully integratedÂ- 2.4 and 5 GHz power amplifiers (PAs) supporting calibration free capability. With dual-band radio, baseband, and PA on single die, solutions support up to 867 Mbps of physical layer data rate (256 QAM) and can intelligently determine receiver's distance and location, control various...

Read More »
Electronic Amplifiers

Variable Gain Amplifier targets multi-market applications.

Housed in 1.5 x 1.2 TDFN plastic package, Model MAAM-011100 is fabricated using GaAs process, which features full passivation. Broadband amplifier boasts typical gain control range of 30 dB with +13 dB of P1dB performance. Input and output are fully matched to 50 Ω with return loss of -12 dB.Â- Typically biased with single +5 V Vd for standard operation over 4–20 GHz frequency band,...

Read More »
Variable Gain Amplifier offers 3 dB noise figure and 39 dB gain.
Electronic Amplifiers

Variable Gain Amplifier offers 3 dB noise figure and 39 dB gain.

Intended for DOCSIS3.1 reverse path infrastructure applications, MAAM-011122 integrated linear 2-stage differential VGA operates from 5–300 MHz and offers 39 dB of gain with 31.5 dB attenuation range. Leveraged technologies produce linearity and output power that enable customers to achieve 36 dB MER for 64 QAM modulation with 39 channels at 52 dBmV per channel. Power down function for each...

Read More »
Electronic Amplifiers

Scintera Announces Highly Integrated Dual-Path RF Predistortion Linearizers Targeting Small Cells and Remote Radio Heads

SC2200 and SC2220 address small cell MIMO, DAS, AAS, RRH and multi-band designs ranging from 250mW to 60W or more output power at the antenna SUNNYVALE, Calif. – Scintera Networks, Inc., a leading provider of mixed signal semiconductors for wireless communications, today announced the availability of the SC2200 and SC2220 dual-path system-on-chip (SoC) RF Power Amplifier Linearizers (RFPAL)....

Read More »
Custom MMIC to Debut Several New Amplifiers and I/Q Mixers at IMS
Electronic Amplifiers

Custom MMIC to Debut Several New Amplifiers and I/Q Mixers at IMS

Westford, MA – Custom MMIC, (www.CustomMMIC.com), a developer of performance-driven monolithic microwave integrated circuits (MMICs), is pleased to announce the debut of several new GaAs MMIC amplifiers and mixers in booth #1807 at the International Microwave Symposium in Seattle, WA June 4-6th. Their suite of all-positive bias amplifiers demonstrates that by eliminating the negative voltage...

Read More »
MIL-STD is Standard in KCB Booth at IMS 2013
Electronic Amplifiers

MIL-STD is Standard in KCB Booth at IMS 2013

Shirley, MA – KCB Solutions, (www.kcbsolutions.com), an ITAR and AS9100 accredited microwave design and manufacturing center, is pleased to announce a suite of MIL-STD certified products and services for the military, aerospace, and defense market. They’ll be exhibiting in booth #1610 at the International Microwave Symposium in Seattle, WA June 4-6th. Senior staff will be on-hand to answer...

Read More »
Broadband Amplifier offers positive bias.
Electronic Amplifiers

Broadband Amplifier offers positive bias.

Intended for applications from 2–20 GHz, CMD187 wideband GaAs monolithic microwave integrated circuit (MMIC) amplifier die delivers greater than 22 dB of flat gain withÂ- corresponding output 1 dB compression point of +14 dBm and noise figure of 4.5 dB at 20 GHz. All-positive bias design eliminates sequencing circuits while simplifying board layout, and use of on-chip tracking...

Read More »
Electronic Amplifiers

WiFi (802.11ac) Power Amplifiers integrate to conserve space.

Optimized for WiFi infrastructure and multimedia applications, 802.11ac PAs leverage InGaP-Plus™ technology and featureÂ- integration that reduces external component requirements and conserves PCB space. Model AWL5905 offers 29 dB gain and is optimized for 5 GHz WLAN standards, including 802.11a/n/ac. Supplied in 4 x 4 x 0.8 mm SMT package, this WiFi PA integrates detector...

Read More »

All Topics