Servo Amplifiers are vibration-proof.
i Drive digital servo drives are point-to-point digital amplifiers available in 7 models with power ratings from 0.5 to 3 kW (1- or 3-phase). Drives can be used for velocity, torque, and position control of synchronous and asynchronous motors. They offer Digital Signal Processing (DSP) technology based on vector-based sensorless field algorithm. LCD display and 6 function/programming pushbuttons...
Read More »
CMOS Power Amplifier suits portable applications.
Model FAN7021 produces up to 1W of low-distortion continuous output power (1.5W peak) with supply voltages from 2.0V to 5.5V. Device utilizes integrated adaptive bias current control circuit, and has low-shutdown current consumption (0.1 microamp). Total harmonic distortion (THD) is 0.2%, and power supply rejection ratio (PSRR) is 65dB. Thermal shutdown protection, unity gain stability, and...
Read More »
MOSFET Op Amp produces high power.
PA17 high voltage power operational amplifier offers current rating of 50A continuous or 100A pulse with power dissipation of 850W and slew rate of 50V/microsecond. It has 4-wire current limit circuit, 200 V supply, external shut down control, and optional boost voltage inputs. Applications include semiconductor testing, sonar transducer driver and linear and rotary motor drives.
Read More »
Signal Conditioner takes signals from RCCs.
Single-channel Model 2775B bench-top amplifier accepts inputs from PE, ISOTRON or remote charge converters (RCCs) with input range from 0.01 to 100,000 engineering units. It operates from input power of 90-240 Vac. Setup is accomplished manually on unit's front panel or via RS232 interface and optional software. Unit has switchable isolation, gain range of 0 to 10,000, and frequency response of...
Read More »
Polymer Protection For Optical Fiber
To learn more about the challenges your optical fibers face, and which polymers are best to protect them, download this white paper.
Read More »
Brushless Amplifiers offer DSP-based sinusoidal performance.
SS100 and SS200 SimpleServo-® digital brushless amplifiers range from 80 to 320 Vdc and 115Vac/230Vac, with peak currents ranging from 4 to 24 amps. Amplifiers can drive linear or rotary brushless motors with encoder feedback. SS100 accepts -
Read More »
Op Amps have boost voltage.
PA38 and PA39 high voltage MOSFET power operational amplifiers are constructed with surface mount components on thermally conductive but electrically isolated substrate. Metal substrate allows PA38 and PA39 to dissipate power up to 125 watts. Power supply voltages range from -
Read More »
RF Amplifier handles BCI testing environments.
Model 100A400 has high load tolerance, making it suitable for harsh test environments encountered in bulk current injection testing in automotive industry, where VSWR can exceed 6.0:1. 100 watt, 100 kHz to 400 MHz amplifier is also suitable for laboratory applications requiring instant bandwidth, high gain and moderate power output, such as antenna and component testing, wattmeter testing, and as...
Read More »Operational Amplifiers increase battery-powered system life.
MCP602X family of rail-to-rail input and output op amps are suitable for low current, battery-powered applications. MCP6021 (single), MCP6022 (dual), and MCP6024 (quad) devices meet industry standard pin-outs in standard PDIP, SOIC and TSSOP packages. Each has unity gain stability with gain bandwidth product (GBWP) of 10 MHz, low noise, and maximum quiescent current of 1.35 -µA. Devices can be...
Read More »Op Amps offer supply voltages from +/-2.5V to +/-9V.
MIC918 and MIC919 high speed op amps achieve slew-rates of 1500V/-µs while consuming 550-µA and 360-µA, respectively. Both op amps are voltage-feedback, unity-gain stable devices housed in SC70-5 packaging. Gain-bandwidth product for MIC918 and MIC919 is 51MHz and 27MHz, respectively. Both Op Amps have 60 degrees of phase margin at unity gain that increases with load capacitance. MIC918 and...
Read More »
Rejection Filters address SATCOM market.
Series 12086 transmit rejection filters are installed between antenna and LNA in receive segment of satellite earth terminals. They are used in C-band transceiver applications to isolate uplink and downlink signals. Units offer low loss, typically less than 0.04 dB on receive signals, while providing high degree of transmit rejection, ranging from 50 to 80 dB. Construction is 100% dip brazed...
Read More »
Solder Redefined
Indium Corporation has developed a new twist on traditional solder by developing a composite with a reinforced matrix internal structure. The result is a solder with increased strength and reliability. Check out this video to learn more about the mechanics behind the groundbreaking technology.
Read More »
