Electronic Amplifiers

Power Amplifier targets mobile audio applications.
Electronic Amplifiers

Power Amplifier targets mobile audio applications.

Designed to operate over 2.4-5.5 V supply voltage range, Model TS4962 provides 3 W of output power into 4-ohm loudspeaker with 88% efficiency. Quiescent current with no input signal is 2.3 mA typ and standby current when powered down using active-low control line is 10 nA. Pop and Click reduction circuitry provides low on/off switching noise while allowing amplifier to start within 5 ms....

Read More »
Electronic Amplifiers

Video Signal Processors feature integrated filters.

Manufactured in bipolar silicon germanium process, 3-channel Models THS7303, THS7313, and THS7353 feature 2.7-5 V single-supply operation and offer I2C programmability of all functions independently for each channel. Selectable input bias modes and rail-to-rail outputs allow for variety of ac and dc coupled modes. Integrated Butterworth filters provide analog signal conditioning required in video...

Read More »
Electronic Amplifiers

Op Amps suit battery-powered applications.

Operating within supply voltage range of 1.8-5.5 V, micro-power Series OPA379 features single supply operation and quiescent current of 2.9 Â-µA. Combination of dc specifications such as Vos of 1.5 mV max, CMRR of 90 dB min, PSRR of 10 µV/V max, and AOL of 100 dB min makes series suited for designs requiring precision with low power consumption, such as handheld medical instruments,...

Read More »
Electronic Amplifiers

OEM Upgrade Kit optimizes vehicle audio systems.

Rockford Fosgate® dealer option audio upgrade kit replaces factory front door speakers with 6Â-½ in. triaxial speakers for crispness and clarity. Subwoofer enclosure, featuring 10 in. long-throw subwoofer and 150 W custom MOSFET amplifiers, is molded to fit contours of vehicle and can be removed to fold seats flat. Kit includes all necessary wiring harnesses, adapters, and templates...

Read More »
Seal Stuff In, Seal Stuff Out
Sponsored

Seal Stuff In, Seal Stuff Out

One of the best ways to make sure that your machinery stays up and running in the face of adversity is to make sure that it's properly sealed. Of course, it's not always easy to determine whether the integrity of your seals are up to par. How can you tell when you have a problem?

Read More »
Electronic Amplifiers

Portable Media Box offers sound for music, games, and video.

Utilizing stereo pair of Odyssey® transducers, JBL On Tour Black(TM) provides 6 W of total power and is equipped with touch volume controls, integrated protective cover, and stand. Four standard AAA batteries provide more than 24 hr of operation at normal listening levels due to digital amplifier and advanced energy management system. Unit is slightly larger than eyeglass case and is suited...

Read More »
Audio Amplifiers deliver 1.6 W output power.
Electronic Amplifiers

Audio Amplifiers deliver 1.6 W output power.

Single-channel Models AS1701 and AS1706 contain bridge-tied load output stage to differentially drive 4 Ohm and 8 Ohm speakers. At THD+N of 1% they deliver 1.6 W output power into 4 Ohm load or 1.2 W into 8 Ohm load. With input supply of 2.7-5.5 V, amplifiers can be used for 3 V systems, delivering 600 mW continuous output power into 4 Ohm. Housed in 8-pin MSOP package, devices are suited for...

Read More »
Electronic Amplifiers

Unity Gain Stable Op Amp achieves 1 nV/rt-Hz voltage noise.

Employing circuit architecture that minimizes voltage noise and harmonic distortion, ADA4899-1 operational amplifier (op amp) delivers spurious free dynamic range (SFDR) of 117 dBc @ 1 MHz. It features 0.23 mV max offset voltage and 1 Â-µA max input bias current. Capable of operating over -40 to +125°C temperature range, product is offered in 3 x 3 mm LFCSP (lead frame chip-scale...

Read More »
Electronic Amplifiers

Optimized Fiber is suited for high-energy amplification.

Suited for amplifying pulses from 1 Â-µm lasers with durations from nanoseconds to femtoseconds, Yb1200-20/125DC ytterbium-doped, large-mode-area fiber has 20 µm diameter core and octagonal cladding shape. Cladding pump absorption from 6.8 dB/m @ 920 nm to 29 dB/m near peak @ 976 nm enables use of active fiber lengths down to few 10's of centimeters for 976 nm pumping. Fiber has 125...

Read More »
Electronic Amplifiers

Amplifier is suited for DAQ, control, and test equipment.

Manufactured in MSOP8 package, INA159 level-shifting difference amplifier has gain of 0.2 and is designed to interface ±10 V signals to single supply ADCs. Split reference connection simplifies biasing at one half supply or reference and eliminates need for additional op amp. Included amplifier is suited for driving up to 14-bit ADCs. Along with 1.5 MHz bandwidth and 15 V/Â-µs slew...

Read More »
Electronic Amplifiers

Differential Amplifiers drive high-speed ADCs.

Designed for 3.3-5 V DAQ systems, high-gain THS4508 and unity gain stable THS4511 and THS4513 feature fully differential architecture and 5 V single supply operation. Bandwidths range from 1,600-2,000 MHz, with slew rates from 4,900-6,400 V/Â-µs. Suited for operation over -40 to +85°C range, all models come in 16-pin QFN package and deliver noise and distortion performance that enables...

Read More »

All Topics