Electronic Amplifiers

Audio Amplifier reduces EMI sensitivity in portable devices.
Electronic Amplifiers

Audio Amplifier reduces EMI sensitivity in portable devices.

Using spread spectrum technology to lower EMI emissions more than 11 dB below FCC limit, Model LM48511 Boomer® amplifier with integrated boost converter allows portable products to operate at constant high-level output power even as batteries deplete to lower voltages. It provides 2.5-3 W of continuous power into 8 W speaker when operating from 3-5 V power supply with less than 1% THD+N....

Read More »
Electronic Amplifiers

Baseband/MAC/Radio IC suits 802.11n applications.

Produced on 65 nm process technology, Intensi-fi(TM) BCM4322 enables wireless networks to support several simultaneous multimedia applications, including HD video streaming. Single-chip 802.11n solution features max data rate of 300 Mbps and allows Wi-Fi® products to achieve over 200 Mbps of actual wireless throughput. On one silicon die, it combines 802.11 medium access controller (MAC),...

Read More »
Electronic Amplifiers

Audio Op Amps feature 0.00003% distortion rate.

Including 34 and 44 V units, LME(TM) families of high-fidelity audio operational amplifiers (Op Amps) offer low-input noise density of 2.7 nV/sqrt Hz, 1/f noise corner of 60 Hz, 600 W output drive, 20 V/Â-µsec slew rate, and 55 MHz gain bandwidth. Model LME49860 is 44 V dual Op Amp that operates over supply range of ±2.5-22 V and provides output current capability of 26 mA, while 34 V...

Read More »
Electronic Amplifiers

Integrated Front End is optimized for Zigbee® modules.

Model RIF211 provides complete front end capability with power amplifier, low-noise amplifier, and antenna switch. It features power amplifier with current draw of 120 mA while transmitting at 20 dBm output. MMIC includes high gain very low noise LNA (LNA Gain = 15 dB, NF less than 1.0 dB), as well biasing circuitry in miniature 16-pin 3 x 3 x 0.5 mm QFN package. Module is fully matched...

Read More »
Electronic Amplifiers

New High-Speed Amplifiers from National Semiconductor's PowerWise Line of Energy-Efficient Products Provide the Industry's Highest Performance at the Lowest Power

Amplifiers Combine with National's ADCs, Clock Conditioners and Power Management ICs on Three Reference Design Boards Targeted at Wireless Infrastructure, Test and Measurement, and Defense and Space Applications SANTA CLARA, Calif., Sept. 24 -- National Semiconductor Corporation (NYSE:NSM) today introduced three new energy-efficient, high-speed differential amplifiers that are well-suited for a...

Read More »
Electronic Amplifiers

ANADIGICS Ships 802.11n Power Amplifiers to NXP Semiconductor for WLAN Module Solution

ANADIGICS Supplies AWL6951 Dual-Band PA to NXP for Broadband Home Connectivity Market WARREN, N.J., Sept. 11 / -- ANADIGICS, Inc., announced today that the company is shipping production volumes of its AWL6951 Wireless LAN(WLAN) power amplifier(PA) module in support of the upcoming 802.11n multi-input, multi-output (MIMO) standard to NXP Semiconductor for their WLAN module solution, MRX2000. The...

Read More »
Electronic Amplifiers

National Semiconductor Expands Industry's Most Comprehensive Portfolio of Professional and Broadcast Video Product

Seven New Products Deliver Industry-Leading Performance Specifications for Jitter, Bandwidth, Size and Low Power AMSTERDAM, Netherlands, Sept. 7 / / -- IBC -- National Semiconductor Corporation (NYSE:NSM) today introduced seven new products for professional and broadcast video applications. These integrated circuits help video-system design engineers differentiate their end products. These new...

Read More »
CMOS Amplifiers have 3.5 MHz gain bandwidth.
Electronic Amplifiers

CMOS Amplifiers have 3.5 MHz gain bandwidth.

Dual LTC6081 and quad LTC6082 CMOS Op-Amps have less than 90 Â-µV offset over -40 to +125°C temperature range. Featuring rail-to-rail input and output stages, they achieve low frequency noise of 1.3 µVp-p and low input bias current of 1 pA max at 25°C. Also offering CMRR of 105 dB and PSSR of 90 dB, as well as signal voltage gain of 120 dB, devices consume 330...

Read More »
Electronic Amplifiers

Precision Op Amps feature low-noise design.

Built on VIP50 BiCMOS process, LMP7731 (single) and LMP7732 (dual) precision op amps provide input voltage noise of 2.9 nV/sqrt Hz with 1/f noise corner of 3 Hz. They also feature 0-10 Hz peak-to-peak noise voltage of 78 nVpp, ensuring accurate signal conditioning while minimizing distortion in low-frequency sensor applications. Bipolar input stages with input bias cancellation circuitry lowers...

Read More »
Electronic Amplifiers

Wi-Tron, Inc. Receives Purchase Orders for RF Amplifiers from a Major Repeater Supplier

RARITAN, N.J., Aug. 31 - Wi-Tron, Inc. (BULLETIN BOARD: WTRO) , a manufacturer of power amplifiers, today announced that it has received orders for its CDMA and Tetra amplifiers from a major Repeater Supplier world wide. The 55 units ordered are part of larger supply agreement being negotiated with this Repeater Supplier. Tochi Bains, Chief Operating Officer for Wi-Tron, stated, These purchase...

Read More »
Fresh Air Intake Designed to Meet ASHRAE 62.2 standards
Sponsored

Fresh Air Intake Designed to Meet ASHRAE 62.2 standards

Alan Manufacturing has a long history of developing innovative solutions for HVAC applications. With over 1,000 product designs under our belt, we have gained a reputation as the go-to source for HVAC dampers, hardware, duct supports, zone control systems, and much more. Adding to this extensive list of achievements we now announce the release of our new line of Fresh Air Intake products. Designed to meet ASHRAE 62.2 standards, they are the most robust and high-performance product of their kind. See our video to learn more.

Read More »

All Topics