Electronic Amplifiers

Electronic Amplifiers

Power Amplifiers offer extended bandwidth.

Facilitating EMC and EMI testing applications, 50 W Model SMXE 50-53 measures 14 x 19 x 27 in. and ranges from 10 kHz to 3.0 GHz. Model SMX 200, measuring only 14 in. high, operates from 10 kHz to 1,000 MHz and produces 200 W or greater. Series comes in variety of frequency ranges and power levels to best meet customer's requirements.

Read More »
Electronic Amplifiers

Class-D Audio Amplifier suits portable applications.

Employing filter-free architecture, Model PAM8303D can deliver 3 W into 4 W load, and provide efficiency higher than 90% with 8 W load. Only one input coupling capacitor per channel is needed in external circuit. Available in 9-ball WCSP, MSOP-8, and DFN 3 x 3 8-pin packages, amplifier is RoHS-compliant and suited for cell phones, MP3/MP4 players, PMP, GPS navigators, and portable game machines.

Read More »
Array Amplifier uses far field noise suppression technology.
Electronic Amplifiers

Array Amplifier uses far field noise suppression technology.

Eliminating output frequency distortions and other audio artifacts, PowerWise LMV1088 dual-input microphone array amplifier delivers natural-sounding voice quality in mobile phones, 2-way radios, and powered headsets. Offered in 3.5 x 3.5 mm, 36-bump micro SMDxt package, it draws only 1 mA of supply current, and has power supply rejection ratio of 85 dB at 1 kHz with typical signal-to-noise ratio...

Read More »
Electronic Amplifiers

EMCORE Announces Enhanced 1550nm Transmitter and Fiber Amplifier Product Line

ALBUQUERQUE, N.M., Feb. 26 -- EMCORE Corporation (NASDAQ:EMKR), a leading provider of compound semiconductor-based components and subsystems for the broadband, fiber optic, satellite and terrestrial solar power markets, today announced new features to its 1550nm broadband transmitter and optical amplifier product lines. In order to support the requirements for extended bandwidth CATV systems and...

Read More »
Load Cell Amplifier is available in lead-free version.
Electronic Amplifiers

Load Cell Amplifier is available in lead-free version.

Suited for any full-bridge strain-gauge-type sensor, CSG110 Inline Signal Conditioner/Amplifier offers mV/V range output to provide VDC and/or 4-20 mA signal with built-in regulated bridge excitation source. It features plastic housing with mating DB9 female connector for power output side and DB9 male connector for sensor side, offering power supply range of 12-24 Vdc. DIN-rail-mountable, unit...

Read More »
Electronic Amplifiers

Linear Enters HDTV Market with New Family of High Definition Audio and Video Components at International Builders' Show

ORLANDO, Fla. (February 12, 2008) - At the 2008 International Builders' Show this week, Linear LLC, an innovator in home technology solutions for security, communications and entertainment, introduced its new line of Whole-House HD Solutions, including Linear's High Definition Video Distribution products that conform to the HDMI (High Definition Media Interface) standard. The new line of HDTV...

Read More »
Electronic Amplifiers

Class D Speaker Amplifier features closed loop feedback.

Model TAS5706 is digital-input, 20 W stereo Class-D speaker amplifier with on-chip audio processing capabilities including dynamic range compression, dedicated subwoofer channel for 2.1 applications, and speaker equalization. It provides flexible output configurations that allow manufacturers to use single platform across multiple products. Stereo, quad, and 2.1 output configurations are...

Read More »
Tunable Low Noise Amplifiers achieve less than 1 dB.
Electronic Amplifiers

Tunable Low Noise Amplifiers achieve less than 1 dB.

Developed on LH3 0.5 Â-µm pHEMT process and supplied in RoHS-compliant SOT-26 SMT plastic package, M/A-COM MAAL-007304 and MAAL-007306 have noise figures less than 1 dB across respective designed frequency ranges of up to 3 or 2 GHz. They employ monolithic, 2-stage, self-biased design and operate from one 3.0 V supply. Supplied in RoHS-compliant SC-70 SMT plastic package, MAAL-008550 employs...

Read More »
Electronic Amplifiers

RF Amplifier suits FTTH applications.

Equipped with integrated AGC circuit, Model ACA2604 eliminates need for additional external circuit to implement AGC. Unit features 24 dB gain and operates from 50-870 MHz with 400 W differential input impedance. Housed in 5 x 5 x 1 mm, surface mount package, RoHS-compliant amplifier requires single +5 V supply. Device delivers performance and signal integrity required by GPON residential triple...

Read More »
Basalt America Announces Stronger, Lighter, and Corrosion-Free FRP's (Fiber Reinforced Polymers)
Sponsored

Basalt America Announces Stronger, Lighter, and Corrosion-Free FRP's (Fiber Reinforced Polymers)

Fiber Reinforced Polymers (FRP), represents a truly groundbreaking advancement in structural reinforcement. Lightweight, strong, and green, they are changing the way the construction industry thinks about rebar. Unlike steel, FRPs don't rust and are far stronger than standard rebar. To learn why Fiber Reinforced Polymers are poised to change the way the world builds, see our video.

Read More »

All Topics