Electronic Amplifiers

Electronic Amplifiers

Dual-Band Power Amplifier meets EGSM platform requirements.

Supporting IMT (UMTS2100) and EGSM (UMTS900) band operations, AWT6224 incorporates HELP3 technology to reduce average current consumption and extend talk time in 3G dual-band handsets used worldwide. Product is supplied in RoHS-compliant, 3 x 5 mm package and meets requirements for WCDMA and HSPA operation with Qualcomm chipsets. Voltage regulator and CMOS-compatible logic controls are built-in,...

Read More »
Electronic Amplifiers

Power Amplifier consumes only 143 mA.

Designed for cable applications, including digital cable-ready televisions and set-top boxes, S518324-44Z programmable-gain upstream power amplifier operates from single 3.3 V supply. Programmable device has operating frequency range of 5-65 MHz, low harmonics of -60 dBc typical at 60 dBmV, and 3-wire serial interface for dynamic range control. Housed in thermally enhanced 4 x 4 mm QFN20 package,...

Read More »
Amplifier suits strain gages and strain gage transducers.
Electronic Amplifiers

Amplifier suits strain gages and strain gage transducers.

Fully isolated and EMC-compliant, DR7DC is designed to avoid potential ground loop noise problems. It offers shunt calibration with remote operation and provides acceptable solution when integrating industrial load cells and pressure sensors into control system. Operating from 9-36 Vdc, DIN rail-mount product can be configured for 0-10 V, +10 V, or 4-20 mA outputs from 4 mV to 10 V input signals....

Read More »
Electronic Amplifiers

Dual ADC Drivers offer guaranteed gain matching.

With guaranteed matched gain of ±0.25 dB and matched phase of ±0.1°, Model LTC6420-20 minimizes errors in multichannel systems. Unit provides fixed gain of 20 dB with -84 dBc 3rd-order intermodulation distortion at 100 MHz input frequency. Input voltage noise is 2.2 nV/√Hz, including internal gain-setting resistors. Housed in 3 x 4 mm QFN package, 1.8 GHz Model LTC6420-20...

Read More »
Electronic Amplifiers

Linear Power Amplifiers target CATV set-top boxes.

Operating from +8 V, Model ABA3101 delivers +34 dBmV/channel of linear output power with 12 dB of RF gain. Unit maintains composite second order and composite triple beat distortion below -69 dBc, and provides less than 3.2 dB across 1 GHz CATV band. Model ABA3115, operating from +5 V supply, provides +25 dBmV/channel and 15 dB of RF gain. GaAs IC operates up to 870 MHz, maintains CSO and CTB...

Read More »
Electronic Amplifiers

Class D Amplifiers have 8-28 V single-supply voltage range.

Suited for all-in-one and notebook PCs, LCD/PDP/CRT monitors and TVs, and PC speakers, MAX9736A/B amplifiers feature 67 dB PSRR, and integrated spread-spectrum, filterless modulator that eliminates need for bulky LC filters. With pin-selectable stereo/mono mode, they can drive 4 W stereo or 2 W mono load with supply voltages up to 12 V. Model MAX9736A delivers 2 x 15 W into 8 W loads, or 1 x 30 W...

Read More »
Video Scalers connect PC to HDTV using HDMI.
Electronic Amplifiers

Video Scalers connect PC to HDTV using HDMI.

Featuring VGA inputs and HDMI outputs, Models AT-HDMI500 and AT-HDMI510VGA are designed to seamlessly integrate desktop or laptop computer into HD display system. Units will take any PC resolution up to WUXGA and Mac, and scale it to HD resolution up to 1,080 p. Equipped with local monitor loop out, Model AT-HDMI510 enables user to connect computer's monitor and HDTV, even if there is only 1 VGA...

Read More »
Electronic Amplifiers

Audio Amplifier drives 1.5 W constant output power.

Featuring integrated boost converter, Model TPA2014D1 provides up to 1.5 W across 8 W load, ensuring that volume is maintained even when battery discharges to its minimum voltage. Monolithic, filter-free Class-D audio amplifier features voltage supply range of 2.5-5.5 V and PSRR of 91 dB, enabling direct connection to battery without degradation of sound quality. Available in 4 x 4 mm QFN and 2.3...

Read More »
Power Amplifier provides up to 80 kV peak-to-peak.
Electronic Amplifiers

Power Amplifier provides up to 80 kV peak-to-peak.

Offering DC accuracy better than 0.1% FS, high-voltage Model 40/15 provides precise control of output voltages in range of 0 to ±40 kV DC or peak AC with output current range of 0 to ±15 mA DC or peak AC. Four-quadrant, active output stage sinks or sources current into reactive or resistive loads throughout output voltage range. With slew rate greater than 350 V/Â-µs and...

Read More »
Electronic Amplifiers

Analog Silicon Chip targets aerospace and deep drilling.

Designed to operate continuously under extreme conditions, Silicon On Insulator Chip can be used in jet engines for instrumentation and control, as well as in deep drilling operations with temperatures up to 225°C and depths exceeding 20,000 ft. Circuit enables instrumentation for measuring parameters such as temperature, vibration, pressure, positioning, inclination, and strain.

Read More »

All Topics