Communication Adapter connects remote I/O.
SST Remote I/O Adapter allows user to connect 1769 Allen-Bradley® Compact I/O(TM) to Allen-Bradley® Remote I/O network. It features automatic mapping of I/O module data and support for up to 30 I/O modules in system. Separate LED indicators provide system, network, I/O, and diagnostic status. Baud rate, starting rack, and quarter are user-configurable. Processor lockout option...
Read More »
PC Card Adapter connects CAN networks to notebook computers.
ICPCM Intelligent CAN PC Card Adapter offers 128 kbyte onboard CAN buffer, for use on high-speed CAN networks, and provides 2 kbyte dual-port RAM for high-speed data exchange between card and PC. CAN traffic can be captured in real time to minimize possibility of missing messages. ICPCM is outfitted with SJA1000 CAN controller chip, offering full range of data rates up to 1 Mbps and CAN 2.0B...
Read More »
USB Serial Converters suit scientific laboratory research.
Serial converter models NI USB-232 and NI USB-485 allow engineers and scientists to connect to existing serial instruments using USB technology. NI USB-232 converters use RS-232 Serial protocol, while NI USB-485 models use RS-485 or RS-422 serial protocols. Both converters are available in 2- or 4-port configurations. Data throughput rates are rated to 230.4 kb/s (NI USB-232) and 460.8 kb/s (NI...
Read More »
Single Chip USB UART upgrades RS232 systems.
FT232BM transfers serial data over Universal Serial Bus. It can be used to upgrade older RS232 serial designs to USB with minimal development and cost. It incorporates reset and clock circuits, 5V/3.3V UART output voltage, data transfer rates of up to 920 k baud for RS232, and 3,000 k baud for RS422/RS485. Royalty free drivers are available.
Read More »
Deploying Commercial Electronics in Rugged Environments
This white paper explores how Commercial Off-the-Shelf components can be used efficiently and cost-effectively in critical military applications.
Read More »
Adapter Kits facilitate prototyping.
Adapter Kits convert surface mount IC packages such as SOIC, TSOP, QSOP, MSOP, and SOJ to pin compatible DIP modules in pin counts ranging from 4 to 48 pins. PLCC-PGA adapters work with PLCCs in 28 to 100 pin counts. Adapters utilize FR4 substrates and can be used to replace end-of-life through-hole integrated circuits. Kits are offered with gold or solder plated machined pins or phosphor bronze...
Read More »USB System features Windows CE .NET operating system.
Graphics Master System can act as USB client or host and supports wide range of communications protocols allowing customers to fully utilize features found in Windows CE .NET. Windows CE .NET provides seamless integration into wireless connectivity, Web Services and .NET enterprise solutions. It is suitable for low-power and mobile applications.
Read More »
USB Plug is used in dongles and adapters.
Surface-mount A-type USB 4-pin plug is available with 0.90 mm or 1.35 mm plastic posts. Insulator material is black or white PA6T high temperature thermoplastic. Plug has through-hole shield tabs and contacts made from phosphor bronze with gold flash over nickel. It is suitable for use in flash memory devices, USB hard drives, and hardware/software keys.
Read More »
ESD Suppressor also has EMI/RFI filtering.
SPUSB1 provides upstream USB port protection. Device combines ESD protection up to 30 kV, EMI/RFI filtering, and termination into SC70 six lead package. Able to protect upstream circuit elements such as USB controllers, it replaces 10 discrete devices required for same functions. Suppressor provides ESD protection for all data lines as tested under MIL-STD-883D specification. It also offers 15 kV...
Read More »
USB to GPIB Hub Controller works with test instruments.
Model 1105 combines GPIB Controller and USB powered hub, making it possible to convert any desktop or portable PC with USB interface into full-function, IEEE 488.2 compatible Bus Controller. Supports Windows 98, ME, 2000, and XP and programming languages like Visual Basic and Visual C/C++. It has six powered USB ports for driving USB instruments or other USB devices. Unit can be rack mounted in...
Read More »
Interface Cards provide front, side, and rear access.
PM Series interface cards add PCMCIA ports to any PC that has PCI or ISA slots available. They permit prototype data-acquisition and motion-control systems on users' desktops. Front/side access, hot swap cards include PM 235P and PM 235A units, which offer Type II and Type III PCMCIA ports, and communicate via PCI and ISA slots, respectively. Another unit combines 1 Type III PCMCIA port with one...
Read More »
ISO-Certified Precision Machining and Contract Manufacturing Services from DFF
DFF is an industry leading contract manufacturer specializing in medium to high production precision machined components and electromechanical assemblies. Our 100 CNC machining centers and design-assist capabilities ensure our customers' needs are always met. Check out our video to learn more.
Read More »