USB-To-Serial Adapter links PC to any legacy device.
USB-to-Serial Adapter transfers data at over 1 mb/sec and complies fully with USB Rev 1.1. It works with any PC running on Windows 98, 2000, XP or higher, or MAC with OS v8.6 or higher. Adapter package includes adapter, 6 ft USB A-B cable, and driver CD.
Read More »Wireless Serial Adapter is O/S independent.
Wavespeed(TM)/S utilizes Bluetooth(TM) technology to connect peripheral devices wirelessly. It offers instant EIA-232 serial cable replacement to increase user mobility. Secure communication is provided via encryption, authentication, and adjustable transmit range. Distance between peripheral device and host can be up to 328 ft for Class 1 radio, or 32 ft with Class 2 radio. Wavespeed/S can...
Read More »Interface Adapter expands DeviceNet(TM) capabilities.
Coupled with POINT I/O(TM), 1734-ADNX DeviceNet network interface adapter, with subnet expansion, provides control, configuration, and data-collection capabilities for industrial devices. It increases reach of DeviceNet to 1,500 m and, depending on scanner capability, to more than 126 nodes per scanner. Top connector connects adapter to main DeviceNet network and to controller scanner module....
Read More »Wireless CardBus Adapter is suited for portable PCs.
Based on IEEE 802.11a, 802.11g, and 802.11b WLAN standards, 32-bit 11a/b/g Wireless CardBus Adapter provides secure wireless connectivity for portable PCs. It offers data rates up to 54 Mbps in 2.4 and 5 GHz bands. Offerings include 802.11a/g/b seamless roaming and manual selection mode; dual band diversity antenna; and PCMCIA Type II CardBus. Product offers support for existing WEP encryption as...
Read More »
USB to I2C-Bus Adapter is USB-powered.
Model UCA93LV supports all I2C-Bus-compliant protocols, including Master and Slave in 8- and 10-bit/extended addressing formats in both 100 and 400 kHz high-speed modes. Product offers full data-logging mode and real-time data filtering and works with I2C-Bus systems running on supplies from 1.8-5 V. I2C-Bus voltage selection is software programmable. In addition to I2C-Bus port, unit includes 2...
Read More »Adapter helps build high-speed local/remote storage network.
The eserver 2 Gigabit Fibre Channel Adapter is a 64-bit address/data, short form factor PCI-X adapter with LC type external fibre connectors that provide single or dual initiator capability over optical fibre link or loop. Cabling supports distance up to 1640 ft running at 1 Gbps and 984 ft running at 2 Gbps. Unit will auto-negotiate for highest data rate of which device or switch is capable.
Read More »
Bus Converters process up to 200 W in BGA package.
Based on VoI Chip (VIC) surface-mount power components, 48 to 12 V Bus Converter Modules suit Intermediate Bus Architecture (IBA) applications. VICs process up to 200 W, acting as functional building blocks to create flexible factorized power system. Power density is 800 W/in.Â-³, while efficiency exceeds 96% over load range. Speed and transient performance allow units to respond to 100%...
Read More »Optical Network Unit meets IEEE recommendations.
The RA21 Optical Network Unit enables reliable optical Ethernet services to business and residential users through point-to-point fiber-based network infrastructure. It provides 100 Mbps fiber connection from service provider's network to 10/100 Mbps auto-negotiating connection to enterprise network. Product is managed from central office through NetBeacon Element Manager for remote failure...
Read More »Ethernet Adapters conform to IEEE 802.3 standards.
Dual-Port Ethernet PCI-X adapters expand network connectivity options for IBM eserver pSeries(TM) and RS/6000® systems. Full-duplex Gigabit Ethernet adapter can be configured to run each port at 10, 100, or 1000 Mbps data rate and supports jumbo frames when running at 1000 Mbps speed. Gigabit Ethernet-SX PCI-X Adapter offers 1000 Base-SX full-duplex Ethernet LAN connections with throughput...
Read More »
USB-to-Serial Cable gives two serial ports for laptops.
USB-2COM allows RS232 serial devices to talk to USB PCs. Based on FTDI's single chip FT232BM USB UART IC for transferring serial data over USB, 2-serial-port USB adapter is housed in plastic enclosure. It adds two Windows Serial Com ports via laptop's USB connection and is compatible with new and legacy RS-232 devices. It provides internal 128-byte transmit buffer FIFO, 384-byte receive buffer...
Read More »
Standex Engraving Mold-Tech Offers Nickel Shell Capabilities on a Global Scale
Standex Engraving Mold-Tech is the premier, global supplier for mold texturing and surface finishing. With a full range of services, Standex Engraving Mold-Tech is also the only nickel shell supplier producing in three global locations. See our video to learn more.
Read More »
