Electronic Adapters


Altronix e-Bridge(TM) Enables IP over Coax Full Duplex 100Mbps
Electrical Equipment & Systems

Altronix e-Bridge(TM) Enables IP over Coax Full Duplex 100Mbps

New Models Accommodate High Speed Edge Devices Using Coax Infrastructure Atlanta, GA — Altronix is showcasing its expanded line of eBridge™ Ethernet over Coax Adapters with new models featuring full duplex 100Mbps here at ASIS 2014. eBridge is a cost-effective solution to upgrade and expand security and surveillance utilizing coax, while supporting PoE, PoE+ and Hi-PoE devices. eBridge can...

Read More »
Electrical Equipment & Systems

USB to Serial Bridges offer 12 Mbps USB data transfer rate.

Available with 1, 2, or 4 UART channels, XR21B142x Series provides way to interface with RS-232 or RS-485 serial networks through USB using minimal PCB space. Large 512 Byte transmit and receive FIFOs enable max data throughput of 9 Mbps across up to 4 UART channels. Offering ±15 kV ESD protection on USB pins, devices eliminate need for additional protection components, making them suitable for...

Read More »
Computer Hardware & Peripherals

SD Card Controller supports UHS-II and U3 Speed Class.

Available in Lexar PRO 2000x as well as PRO 1000x SDHC/SDXC cards, single-channel Model SM2704 supports UHS-II bus interface and UHS Speed Class 3, featuring max data read speed up to 280 MBps along with max data write speed up to 260 MBps. Complete hardware/firmware solution supports all types of NAND Flash, including 1x/1y/1z nm SLC and MLC NAND. It handles needs of professional photography,...

Read More »
Electric Receptacle allows remote device control via Wi-Fi.
Electrical Equipment & Systems

Electric Receptacle allows remote device control via Wi-Fi.

Compatible with any Wi-Fi® network, Wi-Fi Smart Plug (DSP-W110) enables devices to be turned on and off from anywhere using mydlink™ Home app for iOS® and Android™ running on smartphones or tablets. Users can also create power on/off schedules to automate various devices. One-button installation requires user to press WPS button on existing router and on Smart Plug and then download app...

Read More »
Whitepaper: 7 Trends for IoT in Hospitality
Sponsored

Whitepaper: 7 Trends for IoT in Hospitality

The Internet of Things is rapidly becoming a defining characteristic in the daily landscape of human experience. Billions of smart devices are already connected to this vast system through smart homes, medical devices, and much more; the trend is predicted to continue its exponential growth into the hundred billions within the next few years. This white paper illuminates how the future of IoT will completely revolutionize the way the hospitality industry in particular will function with this new technology. Due to the ability to reduce energy costs, reduce staff labor, and create completely individualized and engaging guest experiences, the hospitality industry is in a unique position to capitalize on IoT. Using real life case studies, the report outlines seven ideas for how the IoT can be used to reduce energy consumption, increase guest satisfaction, improve maintenance, and more.

Read More »
Electrical Equipment & Systems

CNC Hardware Adapter brings MTConnect to legacy CNC machines.

Configurable Ax760–MTC allows communication with legacy, FANUC-controlled CNCs utilizing MTConnect standard. Plug-and-play unit connects into main FANUC I/O Link bus to transform FANUC signal into MTConnect software protocol without disrupting machine. Consequently, machine can passively detect data, on both X and Y addresses from 0.0–127.7, as well as 16 additional digital inputs. This lets...

Read More »
Mated and Unmated IP67 RF Adapters operate up to 6 GHz.
Electrical Equipment & Systems

Mated and Unmated IP67 RF Adapters operate up to 6 GHz.

With IP67 rating, RF Adapters are virtually impenetrable to contaminants such as dust, sand, and water. In-series adapters include 7/16 DIN, 4.1/9.5 mini-DIN, Type-N, and TNC, while between-series versions include 7/16 DIN to 4.1/9.5 mini-DIN, 7/16 DIN to Type-N, and 4.1/9.5 mini-DIN to Type-N. Compatible with all like-series connectors, cables, and passive/active components, adapters offer VSWR...

Read More »
Electrical Equipment & Systems

Mini/DisplayPort to HDMI Adapters offer active signal conversion.

Active 4K-capable Video Adapters DP2HD4KS, MDP2HD4KS, and MDP2HD4KSW let users stream audio and video from DisplayPort® 1.2- or Mini DisplayPort 1.2-equipped computer to HDMI-equipped TV, monitor, or projector. Products offer active signal conversion, which does not require multi-mode DisplayPort source signal and thereby fosters compatibility. Backward compatible with 1080p displays, adapters...

Read More »
USB to Ethernet Bridge ICs foster communications adapability.
Electrical Equipment & Systems

USB to Ethernet Bridge ICs foster communications adapability.

Series XR2280x combines Hi-Speed USB 2.0 hub with controllers for 10/100 Ethernet, I²C, EDGE GPIO, and up to 4 UARTs in one RoHS-compliant, green/halogen-free, 32- or 56-pin QFN package. Providing multiple communication standards from one USB port facilitates adaption of legacy product for connection to IoT. Also, devices are suited for use in industrial equipment, factory automation,...

Read More »
Electrical Equipment & Systems

USB Fieldbus Adapter extends connectivity to fieldbus networks.

USB Fieldbus Interface v3 facilitates in-field or instrument shop-based FOUNDATION fieldbus device configuration, monitoring, and troubleshooting. Multiple options are provided for commissioning and configuring FOUNDATION fieldbus devices. Functionality allows Fieldbus devices to be commissioned, decommissioned, and assigned device tags. Communication DTM, included, enables device configuration...

Read More »
EtherCAT Closed Loop Control works with pulse/direction drives.
Controls & Controllers

EtherCAT Closed Loop Control works with pulse/direction drives.

Operating under any ACS EtherCAT® master and acting as EtherCAT node, PDICL enables system performance upgrades without requiring complete redesign. This 121 x 100 x 48 mm, 2- or 4-axis EtherCAT pulse/direction drive interface module specifically delivers position verification/closed loop control of stepper and servo drive/motor combinations with pulse/direction input. Module supports up to 4...

Read More »
How SpinSelect Can Save You Time and Money
Sponsored

How SpinSelect Can Save You Time and Money

Thanks to the unique SpinSelect Multi-Pocket selectable quick change tool holder, its time to rethink the range, complexity and volume of parts that your lathe can produce. Our Spin-Select tool was created to increase productivity and consistency by decreasing downtime associated with lathe cutting tool and insert setups or changeovers. This product is a game-changer for the industry and were pleased to show you why.

Read More »

All Topics