Electronic Adapters

Electronic Adapters

Remote I/O Adapter is configured automatically.

EX-RC1 allows multiple adapters to connect to single PLC with up to 8 expansion modules to each adapter via CANbus. With distributed control abilities and I/O support for maximum of 512 points, it enables Vision PLCs to be used in large machines such as conveyors. Unit allows PLCs to be placed at operator stand, and distributes I/O's in different locations on machine with single CANbus cable...

Read More »
Single-Port Injector meets IEEE 802.3at specifications.
Electronic Adapters

Single-Port Injector meets IEEE 802.3at specifications.

Delivering 33.6 W of power on single Ethernet port, Model POE36U provides fully compliant detection, disconnect, and voltage control. Adapter is Gigabit-compatible and incorporates diagnostic LEDs as well as overvoltage, over-current, and short-circuit protection. Featuring layer 1, 2 finger classification, device is suited for IP telephones, wireless network access points, Bluetooth access...

Read More »
Electronic Adapters

T3 WAN PMC Adapter terminates up to 672 HDLC channels.

Conforming to PCI Local Bus 2.1 specification, Model wanPMC-C1T3 transfers 64 or 32 bits of data up to 66 MHz, enabling advanced voice and data applications, such as VoIP, video on-demand, voice conferencing, and Internet routing. Adapter provides M13 multiplexer, 28 T1/E1 framers, signal conditioning, B3ZS transmit encoding and receive decoding, as well as local and remote loop back capability....

Read More »
Adapter integrates Flash into embedded applications.
Electronic Adapters

Adapter integrates Flash into embedded applications.

Designed to interface up to 2 microSD/TransFlash memory cards to 40- or 44-pin IDE connector, SD-IDE40/SD-IDE44 Adapter includes card detection, allowing different combinations without setting jumpers. Unit acts as true hardware bridge, allowing microSD/TransFlash to be seen as hard drive by host computer. Device also permits host computer to use microSD/TransFlash as bootable device. Measuring...

Read More »
Electronic Adapters

Dual 10GBASE-KR PHY upgrades backplanes to 10 GbE rate.

Designed on 65 nm CMOS process, BCM8073 dual serial 10GBASE-KR-to-XAUI backplane PHY enables 10, 2.5, and 1 Gigabit Ethernet on existing backplane infrastructures. It extends life of existing systems that use 4 lanes to carry 10 Gbps (XAUI) data rates by providing 4X bandwidth improvement per channel. Featuring DSP-based architecture with fully adaptive datapath, 1.2 W solution can drive over 40...

Read More »
Industry-Leading IP-Based Remote Monitoring and Control with Sealevel RMS-1000
Electronic Adapters

Industry-Leading IP-Based Remote Monitoring and Control with Sealevel RMS-1000

The Sealevel RMS-1000 system establishes a new level of capability and performance for remote monitoring and control systems. The RMS-1000 delivers an unparalleled combination of IP-based communication, extensive I/O connectivity, and fanless operation for a reliable and easy-to-configure solution. The system is ideal for broadcast monitoring, security applications, IT infrastructure management,...

Read More »
Electronic Adapters

Interface Software adds programs to IC tester libraries.

AK57X Interface Software with USB Dongle interfaces handheld IC testers with CompactLink Functional IC Test Generating Software, which contains high-level descriptive test programming language optimized for generation of analog and digital IC test programs. It requires RS-232 or USB connection to PC and runs with Microsoft XP and USB jack. Dongle, which also includes pocket knife keychain, must...

Read More »
Ethernet to Instrument Interface complies with VXI-11.3.
Electronic Adapters

Ethernet to Instrument Interface complies with VXI-11.3.

Model 8055 adapts GPIB instruments to Ethernet-based test systems, enabling access to these newly made VXI-11.3 instruments from any computer with NIC interface or over TCP/IP network. Used as external box or mounted inside instrument, VXI-11.3 compliant server enables instruments to be controlled by programs running in Windows and UNIX/LINUX OS. It supports reverse channel Service Request...

Read More »
Electronic Adapters

Video Card enables addition of monitors via USB.

USB 2.0 External DVI Video Card allows adding of extra screens for multitasking, enabling users to connect adapter to USB port and install included driver. Office workers can multitask by stretching large spreadsheets and documents across multiple displays. Device is USB 2.0-compliant and works with Windows® XP and Vista OSs.

Read More »
PC/104 Serial Adapter provides electrical protection.
Electronic Adapters

PC/104 Serial Adapter provides electrical protection.

Featuring 1,500 Vdc port-to-port isolation, C4-104.485+I, part number 3547, optically isolated 4-port adapter protects systems from ground loops and voltage transients. Each port is software configurable for full-duplex RS-422 or RS-485. It includes Oxford 16954 UART with 128 byte transmit and receive FIFOs for communications up to 921.6 Kbps. SeaCOM suite of drivers is used for BERT, throughput...

Read More »
Fresh Air Intake Designed to Meet ASHRAE 62.2 standards
Sponsored

Fresh Air Intake Designed to Meet ASHRAE 62.2 standards

Alan Manufacturing has a long history of developing innovative solutions for HVAC applications. With over 1,000 product designs under our belt, we have gained a reputation as the go-to source for HVAC dampers, hardware, duct supports, zone control systems, and much more. Adding to this extensive list of achievements we now announce the release of our new line of Fresh Air Intake products. Designed to meet ASHRAE 62.2 standards, they are the most robust and high-performance product of their kind. See our video to learn more.

Read More »

All Topics