Sensorex to Feature Economical S8000 pH/ORP System and More at WEFTEC 2011
See Us At WEFTEC 2011, October 15-19, Los Angeles, Booth 5155 Garden Grove, CA - Visitors to WEFTEC 2011 will have the opportunity to learn more about Sensorex's advanced sensor technology, with demonstrations featuring the S8000 pH/ORP Platform, FCL400 Series Free Chlorine Sensor and CLD400 Series Chlorine Dioxide Sensor. S8000 pH/ORP Platform The low-maintenance, low cost-of-ownership S8000...
Read More »
Stainless Steel Electrode resists creep and corrosion.
SelectAlloy 316LT0-3 has nominal weld metal composition of 19% chromium, 12.5% nickel, 2.5% molybdenum, and max carbon content of 0.03%. Molybdenum imparts resistance to pitting and creep, while carbon content minimizes carbide precipitation and promotes resistance to intergranular corrosion. Self-shielded, flux cored electrode produces flat, well washed bead and provides globular arc transfer...
Read More »
Wide Array of Breakthrough Surface Treatment Technologies on Display at ICE USA
Menomonee Falls, WI - Enercon Industries Corporation is pleased to announce its ICE exhibition booth 1035 will include new and breakthrough surface treating technology for a wide array of applications. New Atmospheric Plasma Solutions Plasma4(TM) and Plasma Synergy(TM) Enercon's Atmospheric Plasma Technology Director Rory Wolf will present Synergistic Plasma Technique for Achieving Remarkable...
Read More »
Stainless Steel Electrodes resist cracking.
Composed of nominal weld metal compositions of 30% chromium, 9% nickel, and 0.1% carbon, SelectAlloy 312 and SelectAlloy 312-C produce 2-phase weld metal with substantial ferrite in austenitic matrix. Flux-cored SelectAlloy 312 welds dissimilar metals such as carbon steels to stainless steels high in nickel, while metal-cored SelectAlloy 312-C welds dissimilar metals at elevated speeds. Both...
Read More »
Design Guide: Heat Sinks for High-Power Applications
Without appropriate thermal management, electronic components will degrade over time, causing problems ranging from minor errors to critical failures.
Read More »
Arcos Covered Stainless Steel Electrodes Weld Hardenable Steels
Mount Carmel, PA ---Arcos Industries, LLC offers two covered stainless steel electrodes that are specially designed to weld dissimilar joints and hardenable steels. Arcos 309H is utilized for welding similar alloys in wrought or cast form, dissimilar metals such as joining Type 304 to carbon steel, and the clad side to Type 304 clad steels. This electrode is well suited for joining Type 304...
Read More »
Sensorex to Feature Calomel Free pH Electrodes, Free Chlorine and Chlorine Dioxide Sensors at Pittcon 2011
See Us At Pittcon 2011, March 13-18, Atlanta, Booth 1829 Garden Grove, CA- Attendees at Pittcon 2011 will want to stop by Exhibit Booth 1829 to learn more about Sensorex's advanced sensor technology, with demonstrations featuring the advanced Calomel Free pH Electrode, FCL Series Free Chlorine Sensor and CLD Series Chlorine Dioxide Sensor. Calomel Free pH Electrode The Sensorex Calomel Free pH...
Read More »
Stainless Steel Electrodes resist intergranular corrosion.
Composed of 19.5% chromium, 14% nickel, 3.5% molybdenum, and max carbon content of 0.03%, SelectAlloy 317-C handles solutions of sulfuric acid and sulfur bearing gases. SelectAlloy 347-C, designed to weld Types 321, 347, and 348 stainless steel, is suited for making small butt, lap, and fillet welds on thin material at elevated travel speeds. Both gas-shielded, metal cored electrodes are...
Read More »
Stainless Steel Electrodes target specific industrial applications.
Used to weld Type 309 stainless steel as well as join carbon and low alloy steels to austenitic stainless steels, SelectAlloy 309H-AP is composed of nominal weld metal of 24% chromium and 13% nickel with carbon content of 0.04-0.08%. SelectAlloy 309LCb-AP, with nominal weld metal composition of 23.5% chromium, 13% nickel, 0.8% columbium, and max carbon content of 0.04%, is used to overlay carbon...
Read More »
Stainless Steel Electrode produces cosmetically appealing welds.
SelectAlloy 316LSi-C gas-shielded, metal cored, austenitic stainless steel electrode has augmented silicon content that improves bead wetting to produce cosmetically appealing weld. Product, composed of 19.5% chromium, 12.5% nickel, 2.5% molybdenum, and 0.8% silicon, has max carbon content of 0.03%. Molybdenum promotes resistance to pitting and creep, while degree of carbon content minimizes...
Read More »H.C. Starck's Product Solutions on Display at the 71st Glass Problems Conference - Ohio State University
EUCLID, Ohio -- H.C. Starck's Molybdenum Glass Melting Electrodes (GME) on display at the 71st Glass Problems Conference at Ohio State University in Columbus, Ohio on October 19-20. Molybdenum is the # 1 choice for glass melting with its exceptional properties that meet the specific requirements: mechanical, electrical, process, corrosion, and cost conditions of the glass melting process. Meet...
Read More »
Precision Fabricating with Over 40 Years of Experience
Quality Sheet Metal specializes in delivering precision, value, and customer service. With a client base that spans many diverse industries and a reputation for excellence that goes back over four decades, our clients know that we can provide the optimal combination of value and flexibility regardless of the challenge. See our video to learn what we can do for you. Through investments in state-of-the-art design, manufacturing, and quality control systems, Quality Sheet Metal remains focused on maintaining a high standard of quality, customer service, and competitive pricing. With an emphasis on customer satisfaction, Quality Sheet Metal is dedicated to establishing long-term partnerships, similar to the ones they currently have with their valued clients. If you're looking for a new partner with extensive capabilities in sheet metal fabricating and finishing, look no further.
Read More »
