Electrical Terminals

Compression Connectors accommodate large cable range.
Electrical Terminals

Compression Connectors accommodate large cable range.

Rated up to 35 kV, UTILUX copper compression terminals and splices install with industry-standard tooling and are color-coded. They are made from seamless ETP copper and precision heat-treat tempered. Available in 1- and 2-hole versions, terminals are compatible with cable from 6 AWG to 1,000 MCM and accommodate termination with compact, compressed, or stranded copper conductors. Splices have...

Read More »
Electrical Terminals

Industrial Terminal withstands harsh environments.

Featuring 10.4 in. touch screen and IP65-sealed face, APC Technology(TM) ET41150 is impervious to dust, airborne particulates, and liquids. Touch screen utilizes projective through-glass technology and can be used with or without glove. Designed as drop-in replacement for 3M Dynapro(TM) ET3170, Model ET41150 interfaces with host computers using ANSI-based control code protocols.

Read More »
Electrical Terminals

Military Satcom Terminal suits out-of-area missions.

Supporting voice/data/video transmission, Ku-Band Model MPT1000 consists of 1 m aluminum reflector antenna, LNB, 4 W SSPA, tablet PC with GPS and compass, and modem. Based on SkyWAN® technology, modem allows for data rates up to 8 Mbit/s. MF-TDMA satellite channel access provides fully meshed connectivity between all network nodes, while Ethernet interface connects IP-based networks and...

Read More »
NKK'S Now Offers 0.250" Quick Connect Terminals on WR Rockers
Electrical Terminals

NKK'S Now Offers 0.250" Quick Connect Terminals on WR Rockers

Terminals Simplify Assembly and Enable Applications Requiring High Current Switching SCOTTSDALE, Ariz. (December 15, 2006) - NKK Switches, an industry leader in the design and manufacturing of electromechanical switches, announced today that its WR series of environmentally sealed rocker switches is now available with 0.250" quick connect terminals. The addition of the quick connect terminal...

Read More »
Disconnect Terminal helps minimize maintenance time.
Electrical Terminals

Disconnect Terminal helps minimize maintenance time.

Accepting pluggable jumpers, WTR 2.5 Disconnect Terminal enables user to plug multiple poles in place with press to back of insulation sleeve. Disconnection can be made using supplied lever or optional pull-pin. Component plug holder converts WTR into component holder where diodes and resistors can be soldered in place. Integrated test sockets allow for 2.3 mm banana plugs to be used for...

Read More »
Termination System features co-extruded 1-piece design.
Electrical Terminals

Termination System features co-extruded 1-piece design.

Designed for use in highly polluted environments, high-voltage HVT-Z includes non-tracking tube and co-extruded stress control grading layer, which uses ceramic semi-conductor technology. Heat-shrinkable tubing conforms to many varying surfaces of termination and provides moisture sealing and stress control. Several configurations are available in voltage categories of 5-8 kV, 15 kV, and 25-35...

Read More »
IDC Terminals provide one-step attachment.
Electrical Terminals

IDC Terminals provide one-step attachment.

Custom ETCO IDC (insulation displacement connection) Terminals promote accelerated assembly of 30 or more wires into one terminal by integrating set of blades into connector design that cut through wire insulation. Suited for solid wire applications from 18-28 Ga, connectors utilize preloaded internal contacts for wire attachment, create gas-tight contacts, and eliminate need for wire stripping...

Read More »
Solderball Pin(TM) Technology Facilitates SMT Reflow & Eliminates Co-Planarity Issues for PCB-Based Sub-Assemblies
Electrical Terminals

Solderball Pin(TM) Technology Facilitates SMT Reflow & Eliminates Co-Planarity Issues for PCB-Based Sub-Assemblies

San Diego, CA - Autosplice Solderball Pin(TM) technology provides optimal co-planarity improving surface mount manufacturing efficiency of SMT Sub-Assemblies and Power Modules. Power Modules manufactured as a printed circuit board (PCB) sub-assembly are parallel stacked to a customer's host PCB. These mezzanine modules are representative of many other motherboard/daughterboard type assemblies...

Read More »
Heat Shrink Terminal Kit makes fully sealed connections.
Electrical Terminals

Heat Shrink Terminal Kit makes fully sealed connections.

Suited for making connections in corrosive or high-moisture environments, Sta-Kon® Heat-Shrink Terminal Kit includes ring terminals and butt splices, as well as ratchet crimp tool, wire stripper, and butane torch. Terminals and splices are self-insulated with heat-shrinkable, cross-linked polyolefin and internally coated sealant. Terminals feature brazed seams to prevent separation of...

Read More »
Electrical Terminals

Electrical Lug lends safety to aluminum wiring applications.

Designed to improve safety of aluminum-to-copper connections, AlumiConn(TM) is one-piece, tin-plated lug featuring 3 separate ports that eliminate intermixing of conductors. Electrical connector is suited for use in compact spaces and provides lower working temperatures and resistance for connections with aluminum wiring. Lug is UL-Listed to meet requirements of US and Canadian specifications.

Read More »
Precision Machined Parts for High Tech Applications
Sponsored

Precision Machined Parts for High Tech Applications

For precision and value that sets the standard for quality and craftsmanship, EGS Production Machining is the source for precision and value. Our extensive capabilities and dedication to customer service allow us to deliver the optimal manufacturing solution. See our video to learn more.

Read More »

All Topics