Electrical Sensors / Detectors / Transducers

Voltage Detector can detect 44 kV from up to 30 ft away.
Electrical Sensors / Detectors / Transducers

Voltage Detector can detect 44 kV from up to 30 ft away.

Personal Voltage Detector, Model 44SVD detects voltage from 2.4 kV and up without physical contact. As unit is moved closer to voltage-carrying conductor, AC sensor plate picks up radiated electric field, which is amplified and processed by internal circuitry. Once process signal is above threshold, it triggers input of integrated circuit, which turns on both buzzer and LED. Detector includes...

Read More »
Electrical Sensors / Detectors / Transducers

Wireless Sensor Network uses wide range of RF frequencies.

Agile-Link(TM) wireless sensor system, capable of simultaneous, high-speed data acquisition, is for use with wireless strain gauges, accelerometers, temperature, and millivolt level inputs. It supports up to 26 distinct nodes and base stations to communicate real-time digital sensor data simultaneously in license-free ISM band of 902-928 MHz. Receiver sensitivity greater than 110 dBm allows nodes...

Read More »
Bi-Directional Transducer comes in flame-retardant package.
Electrical Sensors / Detectors / Transducers

Bi-Directional Transducer comes in flame-retardant package.

Series 929 current transducer consumes 80-270 mW during operation and offers accuracy of ±1.0% FS over temperature range of -40 to 85°C. Compact package measures 1.9 x 3.3 x 1.9 in. and weighs 6 oz. Unit is powered by 10-34 Vdc, meets UL94V-0 flammability rating, and withstands random vibration levels of 12.0 GRMS and shock pulses of 50 g. Transducers are suited for demanding...

Read More »
Current Sensors feature 50 kHz bandwidth.
Electrical Sensors / Detectors / Transducers

Current Sensors feature 50 kHz bandwidth.

Available in 50 and 100 A versions, Series ACS752 provides 3 kV isolation and single +5 V supply operation while placing only 130 Â-µohm of resistance in current path. Bidirectional units consist of linear Hall IC optimized to internal magnetic circuit. Lead-free, PC-mountable package is only 14 x 22 x 7 mm overall. Applications include AC motor control, battery management, UPS and emergency...

Read More »
Current Transducers mount to stripped-wire relays.
Electrical Sensors / Detectors / Transducers

Current Transducers mount to stripped-wire relays.

Series HBC-138A ac-to-dc transducers sense ac line currents from 5-100 A and produce proportional output voltage of 0-10 Vdc. Inputs can produce signal to analog or digital meter, or can be used by PC or PLC to provide closed-loop control. Factory-set models provide output voltage of 10 Vdc at full scale, while some models provide output voltages that are adjustable using onboard multi-turn...

Read More »
Current Sensor suits thru-hole PCB assembly applications.
Electrical Sensors / Detectors / Transducers

Current Sensor suits thru-hole PCB assembly applications.

Closed loop, linear current sensor, Model CSNA111 is based on Hall effect principles and null balance or zero magnetic flux method. It provides ac, dc, or impulse current sensing up to 70 A with no limitation on measured current waveform. Thru-hole sensing allows signal to be sensed using non-invasive connection, while rapid response time of less than 1 Â-µs allows output signal to closely...

Read More »
Hall-Effect Current Sensor provides low thermal drift.
Electrical Sensors / Detectors / Transducers

Hall-Effect Current Sensor provides low thermal drift.

Open-loop, ±50 A Model ACS750(S/L)CA-050 features two primary leads that are electrically isolated from sensing circuitry. Leads allow current to pass through ferrite core and past sensing element of Hall IC. Monolithic sensor provides low power loss, as internal resistance is only 130 Â-µohm. It is suited for power distribution and management, motor control, welding and plasma cutting...

Read More »
Electrical Sensors / Detectors / Transducers

Wireless Sensor detects radiation and hazardous gases.

AreaRAE-Gamma is equipped with RF modem that enables communication of real-time data transmission of VOC, toxic chemical, and radiation data. It transmits on license-free ISM band and has 2 mi communication range. Unit integrates PID, LEL, electrochemical, and radiation monitoring needed for accurate situation assessment. Features include up to 4 gas sensors, built-in pump, interchangeable Li-ion...

Read More »
DC Current Transducers provide accuracy to 1.0% FS.
Electrical Sensors / Detectors / Transducers

DC Current Transducers provide accuracy to 1.0% FS.

Closed-loop Series 920 is available in 4 models with input current from 0 to ±50 Adc through 0 to ±125 Adc. Open-loop Series 921 offers 9 models with input current ranges from 0 to ±200 Adc through 0 to ±2,000 Adc. Supply voltages range from 18-28 V. Transducers automatically monitor system data remotely, making them suited for remote power stations. Input to output...

Read More »
How SpinSelect Can Save You Time and Money
Sponsored

How SpinSelect Can Save You Time and Money

Thanks to the unique SpinSelect™ Multi-Pocket selectable quick change tool holder, it's time to rethink the range, complexity and volume of parts that your lathe can produce. Our Spin-Select™ tool was created to increase productivity and consistency by decreasing downtime associated with lathe cutting tool and insert setups or changeovers. This product is a game-changer for the industry and we're pleased to show you why.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers