Electrical Sensors / Detectors / Transducers

Electrical Sensors / Detectors / Transducers

PCB-Mounted Transducer measures currents up to 100 ARMS.

Model LAX 100-NP Closed Loop Hall-effect sensor measures currents up to 16.67, 25, 33.33, 50, or 100 ARMS, and multiple measurements is possible with single reference. CE marked unit is 16.35 mm high, and integrates with power modules in drive and inverter designs. It features maximum bandwidth of DC to 300 kHz and overall accuracy of ±0.91% at primary nominal rms current of 100 A. Typical...

Read More »
Current Transducer includes Hall Effect sensor assembly.
Electrical Sensors / Detectors / Transducers

Current Transducer includes Hall Effect sensor assembly.

With tolerance to electrically noisy environments, Series 3® Current Transducer incorporates industry standard communications protocol for direct connection to microcontroller's I/O port. Single package design provides current sensing from 1 mA to over 80 A, and offers galvanic isolation from circuit under measurement. Close-coupled, 12-bit ADC provides precisely calibrated digital output...

Read More »
Current Sensor has operating voltage range of 8-450 Vdc.
Electrical Sensors / Detectors / Transducers

Current Sensor has operating voltage range of 8-450 Vdc.

Offered in SOT23-5 package, HV7800 is designed to be used on high side of circuit to avoid signal degradation and EMI. Operating range allows it to work with 12, 24, and 48 V DC power systems as well as off-line 85-265 V AC systems. Green- and RoHS-compliant current sensing IC operates by sensing voltage across external resistor and transmitting reading to ground-referenced circuit at gain of one...

Read More »
Electrical Sensors / Detectors / Transducers

Digital Multimeters include non-contact voltage indicator.

Series 350 testers offer built-in voltage indicator that issues audible and visual signals in presence of live 80-600 Vac circuit. Testers have UL safety rating to CAT III-600V. Model 61-354 with True RMS tests ac/dc current from 2.000-0.000 A, measures 750 Vac/1000 Vdc voltage, 20 Mohm resistance, and offers continuity certification. Model 61-352 performs same tests without True RMS feature,...

Read More »
AC True RMS Current Transducer feature 0.25% accuracy.
Electrical Sensors / Detectors / Transducers

AC True RMS Current Transducer feature 0.25% accuracy.

With frequency range of 20 Hz to 2 KHz, 1070 Series enables accurate comparisons of ac current measurements as well as dynamic signals. Series features current signal from 4-20 mAdc and voltage power range of 12-32 V. Available in 14 current ranges from 2-250 A, products operate over -40 to +185°F temperature range and are protected against reverse polarity. They feature overload current...

Read More »
Electrical Sensors / Detectors / Transducers

Linear Current Sensors offer 20 A dynamic range.

Featuring isolation voltage to 1,600 Vrms, bi-directional Series ACS706 consists of low-offset linear Hall sensor circuit with copper conduction path located near surface of die. Output has positive slope when increasing current flows through primary conduction path. Units measure ac or dc currents and are suited for motor control, load detection, switched-mode power supplies, and overcurrent...

Read More »
Electrical Sensors / Detectors / Transducers

Sensing/Scanning Products find wood and metal behind walls.

Featuring ac detection, SF-420AC finds wood and metal studs and joists behind surfaces up to 1Â-½ in. deep. Its SpotLite® Pointing system shines green beam of light over stud edges. Model SF-530 finds copper and other non-ferrous metal up to 1½ in. deep and ferrous metal in concrete up to 3 in. deep. It offers same tracing features as SF-420AC and includes backlit LCD display....

Read More »
Electrical Sensors / Detectors / Transducers

Keychain Device detects nearby Wi-Fi hotspots.

Providing means to discover wireless local area network (WLAN) service coverage, 2.34 x 0.35 x 1.25 in. Wi-Fi Finder identifies Wi-Fi 802.11b/g signals for mobile users without requiring them to power-up their laptops. By clicking Detect button, device identifies nearby hotspots without interfering with 2.4 GHz cordless telephones, A/V, or Bluetooth devices. It has 500 ft RF range in open space...

Read More »
Electrical Sensors / Detectors / Transducers

Portable AC Voltage Detector has pocket-sized design.

Fluke 1AC-II VoltAlert(TM) and Fluke 1LAC-II VoltAlert are CAT IV, 1,000 V overvoltage-rated units that enable users to test for energized circuits and defective grounds by touching tester tip to terminal strip, outlet, or cord. Incorporated VoltBeat(TM) technology provides continuous self-test capability, which scans for battery performance and circuit integrity and indicates if device is...

Read More »

All Topics