Electrical Sensors / Detectors / Transducers

Electrical Sensors / Detectors / Transducers

ASIC Transducer is suited for isolated current measurement.

Mounted directly onto PCB as SMD device, Minisens integrates Hall-effect sensors with magnetic concentrator to allow 70 A and higher direct current measurement without requiring additional magnetic core. Solution offers full isolation, with no optocouplers required, and sensitivity from 20-200 mV per Amp of primary current with no insertion losses. Parameters can be configured by on-chip...

Read More »
Electrical Sensors / Detectors / Transducers

Transducer interfaces between voltage monitor and relay.

Designed for electric utility distribution automation systems, Voltage Monitor Transducer provides interface between Current and Voltage Monitoring Insulators and current sensors and electric utility protection relays, metering devices, and other IEDs. It incorporates 3 channels to accommodate 3-phase voltage monitoring applications. Integral power supply accepts 120 Vac, 24 Vdc, or 48 Vdc. I/O...

Read More »
Electrical Sensors / Detectors / Transducers

Monitoring System relays life-sign signals in real time.

Worn underneath protective clothing, VivoResponder(TM) provides first responders and biohazard personnel with compact, non-invasive, continuous life-sign monitoring system. Product consists of lightweight chest strap with embedded sensors designed to allow full range of motion and withstand hostile environments. With included software, commanders and safety officers can simultaneously monitor up...

Read More »
Electrical Sensors / Detectors / Transducers

Control Sensor delivers wireless position tracking.

Insensitive to environmental light, Leica T-Mac offers operation measurement volume up to 98 ft with acceptance angles of ±45° pitch, ±45° yaw, and 360° roll. Sensor can be mounted on moving robots, machines, or parts whose position needs to be monitored in 6 DoF space. Point rate output is 1,000 points/sec backed by 2 sigma length measurement accuracy of 60 microns...

Read More »
Electrical Sensors / Detectors / Transducers

Current Transducers operate from single +5 V power supply.

Combining ASIC with open-loop, Hall-effect technology, HASS Series offers max current measurements from 50-600 A rms. Seven panel-mounted models are available, each measuring 1.6 x 1.2 x 1.3 in. with 0.8 x 0.4 in. aperture for primary conductor. Offering extended operating temperature of -40 to +185°F, transducers measure dc, ac, and pulse currents, while providing galvanic isolation...

Read More »
Electrical Sensors / Detectors / Transducers

Current Transducer measures up to 400 ARMS.

Measuring 2.2 in. high, closed-loop, panel-mounted Model LA 306-S features max bandwidth of dc to 50 kHz and overall accuracy better than 0.7% at primary nominal RMS current. Typical linearity error is ±0.1% at nominal current and max offset temperature drift is 500 Â-µA from -40 to 185°F. Accepting busbars up to 0.51 x 1.18 in., transducer provides response time of less than 1...

Read More »
Electrical Sensors / Detectors / Transducers

Allegro Announces New Low Noise 2100vrms Hall-Effect Current Sensors

Worcester, MA, December 18, 2006 - Allegro introduces two new high performance low noise 2100Vrms isolation current sensors. Allegro's new current sensors, ACS712 (bidirectional) and ACS713 (unidirectional), provide lower noise and higher accuracy than previous generation current sensors. These sensors also include an integrated shield, which effectively attenuates high dV/dt transients across...

Read More »
Electrical Sensors / Detectors / Transducers

Wireless Sensors are designed for building automation.

Product offering encompasses wireless sensors for zone temperature, occupancy, outdoor air, lighting, and air quality. It also includes RF signal receiver/routing module and DDC interface. Latter provides direct connectivity to range of building automation systems through direct I/O or field bus communication. Used as alternative to wired sensors in retrofit and new construction projects, sensors...

Read More »
Electrical Sensors / Detectors / Transducers

VACUUMSCHMELZE Presents New High-Precision Current Sensor for AC/DC up to 150 A in Ultra-Compact Design

Small is beautiful - New current sensor for industrial applications: Hanau / Frankfurt - VACUUMSCHMELZE GmbH & Co. KG (Hanau) presents its new high-precision current sensor family at this year's electronica (14th to 17th November) in Hall B5, Booth 119. Type T60404-N4646-X654, for example, measures maximum effective continuous current up to 50 A and peaks of up to +150 A. The dimensions of the...

Read More »
Electrical Sensors / Detectors / Transducers

E-CONTROL SYSTEMS, INC. Presents Its Intelli-HACCP Enterprise Level Solution for Wireless Remote Temperature Monitoring for School Food Services and Healthcare Food Services

Chatsworth, December 11, 2006, E-Control Systems, Inc., a trusted leader of remote temperature monitoring hardware and software products for the School Food Services and healthcare food services, presents its new Intelli-HACCP(TM) Enterprise level solution for wireless remote temperature monitoring, now available for immediate delivery. The Child Nutrition and WIC Reauthorization Act of 2004...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers