Electrical Sensors / Detectors / Transducers

Wireless Corrosion Transmitter works with water systems.
Electrical Sensors / Detectors / Transducers

Wireless Corrosion Transmitter works with water systems.

Measuring corrosion rate and pitting tendency, Corrater® CWT-9020 is designed for on-line monitoring of water systems in electrically hazardous areas with operating range of -40 to +70°C. Transmitter can be supplied as part of Cosasco® Wireless Corrosion Monitoring SystemÂ- or added to any Emerson Smart Wireless Network or output from gateway via Modbus Interface to...

Read More »
Handheld Voltage Detectors indicate voltages down to 5 Vac.
Electrical Sensors / Detectors / Transducers

Handheld Voltage Detectors indicate voltages down to 5 Vac.

Always on and ready to use, LV-5 Stray Voltage Detector can detect voltage from 5–600 Vac with direct contact and above 600 Vac at distance. Unit has utility-grade, waterproof design and flashing red LED that indicates when voltage is present. VP-1 Voltage Probe, designed to be used as handheld direct contact secondary voltage detector from 50–600 Vac, and as proximity voltage detector for...

Read More »
Wireless Photoelectric Sensor targets dry contact applications.
Electrical Sensors / Detectors / Transducers

Wireless Photoelectric Sensor targets dry contact applications.

Operating on less than 100 Â-µA of current, SureCross® Q45 Remote Device is capable of interfacing with isolated dry contacts or PNP outputs. Unit also features mode where it interfaces directly with NAMUR inductive proximity sensors. Combining self-contained battery, radio, and sensor, solution replaces wired systems with untethered communications, optimizing efficiency by monitoring...

Read More »
Electrical Sensors / Detectors / Transducers

IMI-Sensors to Showcase Echo® Wireless Vibration Sensors at the ISA Automation Week

Depew, NY - IMI-Sensors, the world's largest manufacturer of industrial vibration monitoring instrumentation, announced participation in this year's ISA Automation Week Technology and Solutions Event scheduled for September 24-27 at the Orange County Convention Center in Orlando, FL. The company will exhibit its range of vibration monitoring sensors, including IMI's latest innovation, Echo®...

Read More »
Electrical Sensors / Detectors / Transducers

IMI-Sensors to Showcase Echo Wireless Vibration Sensors at the ISA Automation Week

Depew, NY - IMI-Sensors, the world's largest manufacturer of industrial vibration monitoring instrumentation, announced participation in this year's ISA Automation Week Technology and Solutions Event scheduled for September 24-27 at the Orange County Convention Center in Orlando, FL. The company will exhibit its range of vibration monitoring sensors, including IMI's latest innovation, Echo...

Read More »
Automotive Detection Systems Sensor measures electric potential.
Electrical Sensors / Detectors / Transducers

Automotive Detection Systems Sensor measures electric potential.

Supplied in 10.5 x 10.5 x 3.45 mm package, PS25203 EPIC (Electric Potential Integrated Circuit) sensor is intended for contactless ECG and movement sensing in automotive applications. It measures electric potential sources, such as electrophysiological signals or spatial electric fields, and can be used as dry contact ECG sensor without need for low impedance circuits across heart. Sensor can...

Read More »
Current Sensing Switches offer adjustable setpoint from 1-80 A.
Electrical Sensors / Detectors / Transducers

Current Sensing Switches offer adjustable setpoint from 1-80 A.

For use with 24 Vac/Vdc or 120 Vac supplies, ASXP Series features operation range of 40-100 Hz for monitoring single and 3-phase motors. Units come with solid-core enclosure and LED indicators for trip point contact status. Fixed 2-second delay trip timer eliminates nuisance alarms due to start-up inrush or temporary over-current conditions in motor or heater applications. In motor protection...

Read More »
Electrical Sensors / Detectors / Transducers

ABB to Showcase Leading-Edge Power Technologies at Cigré Event in Paris

Focus on latest power solutions shaping the evolution of stronger, smarter and greener grids Zurich, Switzerland - ABB, the leading power and automation technology group, will present some of its leading power technologies at the CigrÃ-© conference in Paris. Running from August 27-31, 2012, the biennial event is a key platform for the discussion of global trends, technologies and future...

Read More »
Should You Use Current or Voltage in Analog Transducer Readings?
Electrical Sensors / Detectors / Transducers

Should You Use Current or Voltage in Analog Transducer Readings?

Transducers for Equipment Monitoring and More CHESTERLAND OH - When choosing an analog measurement transducer for a variety of instrumentation monitoring applications including machine monitoring, quality assurance, and more, you will be given a choice of signal types. The most common signals for these transducers are either voltage (0-5 volts DC, or 0-10 volts DC) or current (generally 4-20...

Read More »
Krueger Sentry Gauge Announces the Release of Two New Chemical Sight Gauge Models Designed for Aggressive Liquid Storage Monitoring
Sponsored

Krueger Sentry Gauge Announces the Release of Two New Chemical Sight Gauge Models Designed for Aggressive Liquid Storage Monitoring

Krueger Sentry Gauge, a leader in chemical sight gauges, now offers the ultimate in aggressive liquid storage monitoring devices. From sulfuric and hydrochloric acid to bleach, and acetone, our products are designed with robust features that deliver a long and trouble-free service life. See our video to learn all about this new and innovative line of sight gauges.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers