Electrical Sensors / Detectors / Transducers

Electrical Sensors / Detectors / Transducers

Vibration Sensors are designed for high-temperature operation.

Available in ultra-compact housings, top-exit, and side-exit for flexible cable connectivity, Wilcoxon Research® HT (high temperature) series provides continuous output for condition monitoring applications where temperatures reach 150°C. Internal components are rated at 200°C for consistent bias output voltage levels over entire temperature range. Carrying 25 year MTBF rating,...

Read More »
Eddy Current-Based Sensor System is fail-safe up to 285°C.
Electrical Sensors / Detectors / Transducers

Eddy Current-Based Sensor System is fail-safe up to 285°C.

Optimized for thin turbine blades made from aluminum or titanium, turboSPEED DZ140 measures rotational speed of turbochargers in bench and field tests. This eddy current-based revolution counter is thermally stable and suitable for speed measurements from 200–400,000 rpm. Exhibiting immunity to interference in harsh test conditions, 3 mm diaÂ- sensor integrates temperature measurement...

Read More »
Electrical Sensors / Detectors / Transducers

VACUUMSCHMELZE Once Again Presents Sensor Technology at PCIM 2014 in Nuremberg

Hanau / Frankfurt — PCIM, the leading international trade show for power electronics, intelligent motion, renewable energies and energy management, will be held once again in Nuremberg from 20th to 22nd May 2014. This year, the Cores and Components division of VACUUMSCHMELZE GmbH Co. KG (Hanau) will again present its portfolio of sensors for applications in a range of industrial fields at Stand...

Read More »
Magnetic Inductive Flow Sensor provides ±1% accuracy.
Electrical Sensors / Detectors / Transducers

Magnetic Inductive Flow Sensor provides ±1% accuracy.

Unlike sensors with moving parts, Series MFS2 can measure contaminated media in Â-½, ¾, 1, or 1 ¼ in. diameter pipes. Electromagnetic PVDF flowmeter is available for flow ranges from 0.02–66 gpm. Any change in temperature, density, viscosity, concentration, or electrical conductivity does not affect output signal. Providing obstruction-free pipe cross...

Read More »
Electrical Sensors / Detectors / Transducers

Aerotel Receives CE Mark Approval for Its New ECG Devices, HeartView P12/8i and HeartView 12L

New devices feature advanced technology providing capability for high-resolution ECG recordings with immediate transmission capability via the Mobile network. HOLON, Israel – Continuing its efforts to develop high-quality solutions for patient monitoring, specifically for ECG monitoring, Aerotel Medical Systems has received the CE Mark approval for its new ECG devices, HeartView P12/8i and...

Read More »
Solar Arc Fault Detectors monitor strings up to 15 A @ 1,000 V.
Electrical Sensors / Detectors / Transducers

Solar Arc Fault Detectors monitor strings up to 15 A @ 1,000 V.

Comprising UL 1699B-recognized, pre-integrated arc detection solutions, The Sensata PVAF series allows PV inverter and combiner box manufacturers to develop NEC 2011-compliant equipment. Products detect arcs while minimizing nuisance trips by identifying electrical noise signature created by arc faults in array wiring. While each detector monitors up to 4 PV strings, multiple detectors can run in...

Read More »
Touchless Rotary Angle Sensors offer 10 output choices.
Electrical Sensors / Detectors / Transducers

Touchless Rotary Angle Sensors offer 10 output choices.

UtilizingÂ- magnetic pickup to provide touchless measurement range of 0° to 360°, IP69K-rated RFC4800 Series provides absolute, rotary position; up to 12 bit resolution; 0.1° repeatability; and Â±0.5% independent linearity. Outputs include SSI, Incremental, SPI, 0.1–10 V, 4–20 mA, 0.25–4.75 V ratiometric to supply, 0.5–4.5 V...

Read More »
Power Transducers measure 3-phase wattage consumption.
Electrical Sensors / Detectors / Transducers

Power Transducers measure 3-phase wattage consumption.

Housed in compact DIN mounted case, APT Series measures 3 phases of current and voltage and produces analog signal proportional to watts used. Monitor uses current transformers to measure amperes, and line voltage connects directly to transducer, up to 600 Vac. Transducers can be configured to accept 5 A secondary current transformers or ProteCT™ low voltage output sensors. Equipped with finger...

Read More »
Wireless Monitoring Sensors work with iOS mobile app.
Electrical Sensors / Detectors / Transducers

Wireless Monitoring Sensors work with iOS mobile app.

By monitoring pressure, temperature, and humidity in liquid and gas applications, SensoNODE Low Energy Wireless Monitoring Sensors help to predict problems and prevent equipment downtime. Sensors operate on coin cell battery and can be attached to equipment being monitored via standard NPT ports or through quick connect coupling. With max range up to 150 ft from sensors, SensoNODE app wirelessly...

Read More »
Electrical Sensors / Detectors / Transducers

Tollgrade's LightHouse® 4.0 Platform First to Offer Auto-Phase ID for Best-In-Class Smart Grid Sensor Accuracy and Fault Detection

New GSM support further expands Tollgrade's reach into Latin America and EuropeÂ-  San Antonio, Tx. — Tollgrade Communications, Inc., a global leader in providing network assurance solutions to the world's largest utilities and telecommunications providers, today announced the availability of its award-winning LightHouse 4.0 Distribution Monitoring platform, with support for GSM cellular...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers