Electrical Sensors / Detectors / Transducers

Wireless Sensor takes indoor air quality measurements.
Electrical Sensors / Detectors / Transducers

Wireless Sensor takes indoor air quality measurements.

Compatible with DM-124 wireless Modbus networks, IAQM-THCO2 can measure air temperature, relative humidity (RH), and CO2 levels. This IEEE 802.15.4 wireless sensor, auto-configurable inside radio network, determines best route to send data packets and effectively distributes them to all nearby radio neighbors and answers Modbus RTU requests. Any PLC, controller, or PC connected to DM-124...

Read More »
Eddy Current Sensor measures thermal extension of spindles.
Electrical Sensors / Detectors / Transducers

Eddy Current Sensor measures thermal extension of spindles.

By measuring on labyrinth-ring, eddyNCDT SGS 4701 measures thermal and centrifugal force extension of high-frequency spindles. Measured values are fed into CNC machine tool as correction values and compensate for any positioning errors. With dimensions of 4.5 x 10 x 12 mmÂ-³ or 4 x 4 x 10 mm³, miniature sensor can be integrated with controller into machine tool spindle. Unit is...

Read More »
Proximity/Ambient Light Optical Sensor is AEC-Q101 qualified.
Electrical Sensors / Detectors / Transducers

Proximity/Ambient Light Optical Sensor is AEC-Q101 qualified.

Operating up to +105°C, VCNL4020X01 combines IR emitter,Â- photo-pin-diode for proximity, ambient light detector, signal processing IC, and 16-bit ADC in 4.8 x 2.3 x 0.8 mm LLP. Fully integrated 3-in-1 sensor, able to function at any depth or air gap below glass window, has interrupt function, supports I²C bus communication interface, and is...

Read More »
Electrical Sensors / Detectors / Transducers

Stability Sensor performs over wide range of conditions.

Made from pressure sensitive ink, FlexiForce® Enhanced Stability Series 301 (ESS301) is capable of measuring force and pressure in environments with temperatures up to 85°CÂ- and relative humidity up to 95%. Force range is up to 100 lb using recommended circuitry and can be extended via reduction of drive voltage (VT) or resistance value of feedback resistor (RF)....

Read More »
AC Current Sensors include built-in digital display.
Electrical Sensors / Detectors / Transducers

AC Current Sensors include built-in digital display.

CombiningÂ- current operated switch and transducer in single package, ATS Series provides solid-state contact that changes state when current exceeds adjustable level or falls below normal running current. Built-in digital display delivers quick visual indication of where contact changes, enabling accurate setpoint adjustment. With NO or NC switch to control circuits up to 240 Vac, ATS...

Read More »
Managing Remote Water Pumps Using a Modem Data Logger
Electrical Sensors / Detectors / Transducers

Managing Remote Water Pumps Using a Modem Data Logger

Intelligent dataTaker Solution Logs Every Environmental Value CHESTERLAND OHÂ- – An automatic water pumping station contacted CAS DataLoggers requiring an environmental monitoring device for its remotely-located automatic pumps. Previously the station had used paper chart recorders to log various properties such as flow and pressure, but this required too much manual effort to maintain. In...

Read More »
Electrical Sensors / Detectors / Transducers

Vibration Sensors are designed for high-temperature operation.

Available in ultra-compact housings, top-exit, and side-exit for flexible cable connectivity, Wilcoxon Research® HT (high temperature) series provides continuous output for condition monitoring applications where temperatures reach 150°C. Internal components are rated at 200°C for consistent bias output voltage levels over entire temperature range. Carrying 25 year MTBF rating,...

Read More »
Eddy Current-Based Sensor System is fail-safe up to 285°C.
Electrical Sensors / Detectors / Transducers

Eddy Current-Based Sensor System is fail-safe up to 285°C.

Optimized for thin turbine blades made from aluminum or titanium, turboSPEED DZ140 measures rotational speed of turbochargers in bench and field tests. This eddy current-based revolution counter is thermally stable and suitable for speed measurements from 200–400,000 rpm. Exhibiting immunity to interference in harsh test conditions, 3 mm diaÂ- sensor integrates temperature measurement...

Read More »
Electrical Sensors / Detectors / Transducers

VACUUMSCHMELZE Once Again Presents Sensor Technology at PCIM 2014 in Nuremberg

Hanau / Frankfurt — PCIM, the leading international trade show for power electronics, intelligent motion, renewable energies and energy management, will be held once again in Nuremberg from 20th to 22nd May 2014. This year, the Cores and Components division of VACUUMSCHMELZE GmbH Co. KG (Hanau) will again present its portfolio of sensors for applications in a range of industrial fields at Stand...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers