Electrical Regulators

Electrical Regulators

LDO Linear Voltage Regulators offer ultra-low noise, high PSRR.

Designed to meet requirements of RF and analog circuits, 250 mA LP5907 and 800 mA LP38798 respectively feature power supply rejection ratio (PSRR) of 75 dB at 1 kHz and 90 dB at 10 kHz as well as output noise of less than 10 Â-µVrms and 5 µVrms. While LP5907 comes in 0.65 x 0.65 x 0.40 mm micro SMD package and suits mobile handsets, tablets, and WiFi device applications, LP38798...

Read More »
Electrical Regulators

DC Switching Regulator delivers efficiencies over 96%.

Supplied in 3-pin, 11.60 x 7.50 x 10.20 mm, TO-220 compatible SIP, non-isolated P7805-S series is rated at 500 mA and has 4.75–32 Vdc input range that varies in line with output voltage configuration. Output options include 1.5, 1.8, 2.5, 3.3, 5, 6.5, 9, 12, and 15 Vdc. Efficiency is maintained across full input range,Â- with rating of 95% at 32 Vdc. Targeting portable devices,...

Read More »
Electrical Regulators

Synchronous Current PFM/PWM Buck Reglator comes in 8-pin SOIC.

Capable of delivering constant output current up to 3 A and operating input up to 18 V, PowerBlox™ XRP7675 synchronous current mode Pulse Frequency Modulation/Pulse Width Modulation (PFM/PWM) step down (buck) voltage regulator suits energy-efficient products requiring constantly-on power supplies. Product is optimized for 5 and 12 V inputs, withÂ- programmable output voltage down to 0.925...

Read More »
Current Balancer comes in sizes from 5-250 kVA.
Electrical Regulators

Current Balancer comes in sizes from 5-250 kVA.

Current Balancer is designed for 3-phase motor applications where power source is supplying unbalanced current, causing excessive heat, and potentially premature failure. Using high-speed electronic tap switching design, unit precisely adjusts voltage which in turn will balance current to within 3% or less. Housed in NEMA-3R enclosure for outdoor installations, balancer is suited for submersible...

Read More »
Electrical Regulators

Step Down Voltage Regulator delivers max load current of 2 A.

With operating input voltage up to 18 V,Â- PowerBlox™ XRP7674 achieves better than 90% efficient conversions for output current as low as 50 mA. Synchronous current mode PFM/PWM buck regulator operates at fixed 340 kHz switching frequency, with output voltage adjustable down to 0.925 V and ±2% accuracy across operating range. Housed in RoHS-compliant, halogen-free...

Read More »
LED Driver IC targets automotive interior lighting.
Electrical Regulators

LED Driver IC targets automotive interior lighting.

Providing up to 100 mA from each of 4 outputs, Model A6263 drives arrays of high brightness LEDs with constant current for safe operation. Outputs can be connected in parallel or left unused as required, andÂ- regulated LED current from each output is set by single reference resistor. Housed in 8-pin SOICN package with exposed thermal pad for thermal dissipation, programmable current...

Read More »
Ultra-LDO Linear Regulators suit high-current POL conversion.
Electrical Regulators

Ultra-LDO Linear Regulators suit high-current POL conversion.

Designed to provide POL DC-DC conversion in board-level applications, Series APE8968MP-HF3 provides dropout of just 0.23 V at 3 A. Units require 2 supply voltages,Â- one for control circuitry and another for main supply. Power-On-Reset circuit monitors both supply voltages to prevent incorrect operation. Available in ESOP-8 package, regulators include thermal shutdown and current limit...

Read More »
Electrical Regulators

Reference Design supports automotive emergency call systems.

Integrating AEC-Q100 qualified components, Automotive eCall Reference Design includes TPA3111D1-Q1 mono Class D audio amplifier; TPS43330-Q1 single-boost, dual synchronous buck controller; TLV70033-Q1 voltage regulator; and MSP430F2232 16-bit microcontroller. TPA3111D1-Q1 delivers 10 W output power at 8 Ω with greater than 90% efficiency, while TPS43330-Q1 supports automotive start/stop and...

Read More »
LED Driver IC serves automotive interior lighting applications.
Electrical Regulators

LED Driver IC serves automotive interior lighting applications.

Supplied in 8-pin SOIC package with exposed pad, A6269Â- automotive-qualified, linear, programmable current regulator can drive 2 LED strings at up to 200 mA each. Regulated LED current from each of 2 outputs is set by single reference resistor, outputs can be connected in parallel or left unused as required, and current matching in each string is achieved without ballast resistor....

Read More »
Constant-Current LED Driver is AEC-Q100 qualified.
Electrical Regulators

Constant-Current LED Driver is AEC-Q100 qualified.

Integrating high-side, N-channel MOSFET switch, Model A6213 provides constant-current output up to 3 A to drive high-power LEDs. Output voltage automatically adjusts to optimize constant-current supply to variety of LED array configurations including multiple LEDs in series. LED dimming is accomplished via direct logic input PWM signal. Housed in 8-pin narrow SOIC package, IC is suited for...

Read More »
Dodge® Raptor Coupling Now Available in Three Larger Sizes
Sponsored

Dodge® Raptor Coupling Now Available in Three Larger Sizes

The Dodge Raptor coupling epitomizes the innovation and value that has made Baldor a world leader in industrial electric motors. For almost 100 years Baldor has been the go-to source for industries across the globe. The Raptor coupling is just one example of our dedication to engineered excellence and commitment to providing value and performance. See our video to learn more.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers