Electrical Fuses

Surface-Mount Fuse has 50 A @ 32 V AC/DC interrupt rating.
Electrical Fuses

Surface-Mount Fuse has 50 A @ 32 V AC/DC interrupt rating.

Thin-film, chip fuse USF 0603 measures 1.6 x 0.8 mm, is built according to UL 248-1, and is cURus approved. Suited for sensitive electronic devices that require reliable over current protection, lead-free fuse has legend marking that provides visible indication of ampere rating. Product is suited for hand-held devices such as cell phones, PDAs, laptops, 2-way radios, and digital cameras.

Read More »
Circuit Protection Modules suit Tip and Ring applications.
Electrical Fuses

Circuit Protection Modules suit Tip and Ring applications.

SIP modules combine fuses, overvoltage protectors, and resistor networks into vertical mount, SIP configuration. Fuses comply with Power Cross test requirements UL 1950-60950 along with Telcordia/Bellcore GR-1089 for Tip and Ring protection. Packaged on ceramic substrate, devices come in 2- and 4-channel designs. Fuses offer 1.25 A rating at 600 Vac/125 Vdc, and feature power cross rating of 600...

Read More »
Surface-Mount Fuse is lead free.
Electrical Fuses

Surface-Mount Fuse is lead free.

Time-lag Series OMT 125 offers safety at fault currents up to 100 A @ 125 V AC/DC for protection of personnel and equipment from fire or damage. The 1 A fuse offers power dissipation of 88 mW and voltage drop of 88 mV. Rated currents are 500 mA to 5 A @ 125 V. Built to UL 248-14, unit can be directly soldered onto pcb or used with SMD fuseholder. Soldering heat resistance is 260°C for 10...

Read More »
Single Use Fuse features low temperature rise.
Electrical Fuses

Single Use Fuse features low temperature rise.

FT600 fuse assists telecommunications equipment manufacturers in complying with North American overcurrent protection requirements. With low profile and small footprint, fuse provides low temperature-rise under sneak current fault events to prevent damage to circuit traces or multilayer boards. Series includes devices rated for maximum operating currents of 1.25, 0.500, and 2.0 A, and is for...

Read More »
Fuse complies with lead-free manufacturing standards.
Electrical Fuses

Fuse complies with lead-free manufacturing standards.

Series 467 SlimLine(TM) Very Fast-Acting Fuse, offered in EIA 0603 size, uses no lead in fusing element or its termination, which is composed of 100% copper/nickel/tin. Series cuts off flow to circuits in as little as .02 sec at 300% of rated current. Standard outline measures .012 in. in height and is suitable for space-restricted ac or dc circuits. Fusing element protective coating material is...

Read More »
Semiconductor Fuses withstand ratings up to 200 kA.
Electrical Fuses

Semiconductor Fuses withstand ratings up to 200 kA.

Series A15QS Amp-Trap Form 101 fuses protect diodes, thyristors, GTOs, and other semiconductor devices. They are rated 150 V ac/dc and range from 1-6,000 A. Fuses are UL Recognized components, feature AC approvals for UL Guide Number JFHR2, and have been DC tested to UL Standard 198L parameters. Fuse status indicators are optional. Typical system applications include heavy duty devices such as...

Read More »
Resettable Circuit Protector complies with IEEE802.3af.
Electrical Fuses

Resettable Circuit Protector complies with IEEE802.3af.

Surface-mount PolySwitch® SMD050-2018 provides resettable overcurrent protection for Voice Over IP and powered Ethernet equipment. Should any power control FET fail short, unit shuts down individual port and helps prevent system-wide power failure. Once fault condition and power are removed, device resets and allows affected equipment to return to normal operating conditions. Device helps...

Read More »
Lead-Free Fuses withstand high temperatures.
Electrical Fuses

Lead-Free Fuses withstand high temperatures.

Series 466 SlimLine(TM) Very Fast Acting Fuses have totally lead-free fusing element and feature SMD terminations made of copper/nickel/tin. They withstand 260°C required by lead-free wave and reflow soldering. Units can cut off flow to circuit in as little as .02 sec at 300% of rated current. Fuses are available in current ratings up to 7 A and from 24 to 125 V, and can be used in ac or dc...

Read More »
Specialty Kits offer assortment of products.
Electrical Fuses

Specialty Kits offer assortment of products.

Heat Shrink Kits contain 6 in. pieces of single or dual wall heat shrink in variety of colors and sizes. Heat Shrink Terminal Kits include heat shrink ring terminals, butt connectors, and push-on terminals in variety of sizes. Mini® Fuse Kit contains various color-coded fast-acting mini fuses. Battery Hardware Kit is used for corroded lug or terminal replacement. Weather Pack Kit contains...

Read More »
Precision Machining Solutions with Over 25 Years of Experience
Sponsored

Precision Machining Solutions with Over 25 Years of Experience

Quality, customer service, and unbeatable value are the hallmarks of Hogge Precision. Since 1989 we have built a reputation as the go-to precision machining source, servicing many demanding industries. For CNC machining and screw machining, there are few manufacturers that can match our capabilities and expertise. See our video to learn more.

Read More »

All Topics