Electrical Fuses

Electrical Fuses

DC Fuses provide protection for ac/dc applications.

UL listed to 600 Vac/dc, Limitron® DCM Fuses feature interrupting ratings of 100,000 A for ac applications and 50,000 A for dc. Developers of solar photovoltaic systems can utilize fuses to comply with NEC® 690.9(D) which requires that photovoltaic source circuits utilize overcurrent devices listed for dc circuits and have appropriate voltage and interrupting ratings. Additional...

Read More »
Electrical Fuses

Fuses comply with IEC60269 global standard.

Lead- and cadmium-free, dual-indication Series NH fuses meet stringent environmental standards worldwide. They provide visual indication as well as ability to actuate micro-switches for remote indication of operation. Units feature 400 and 500 Vac rated voltages, interrupting rating of 120 kA, operating frequency of 45-62 Hz, and silver-plated full contact blades.

Read More »
Indicating Fuses reduce downtime and arc-flash hazard.
Electrical Fuses

Indicating Fuses reduce downtime and arc-flash hazard.

Edison® Class RK1 and Class J time delay, current-limiting fuses facilitate identification of blown fuse via black-and-white color indicator. In addition to providing protection against short circuit faults that can destroy motors and motor starters, products reduce arc-flash hazard via current-limiting capability that assures minimum incident energy case of arc-flash.

Read More »
Surface Mount Fuse is RoHS compliant.
Electrical Fuses

Surface Mount Fuse is RoHS compliant.

UMT 250 SMD fuse offers breaking capacity of 200 A at 250 or 277 Vac, or 100 A at 125 Vdc over current range of 315 mA to 4 A. Measuring 10 x 3 x 3 mm, unit replaces traditional axial or radial lead through-hole fuses, and is solder immersion compatible according to IEC 60068-2-58. Clear marking of rated currents make it suitable for pick and place operations in manufacture of power supplies,...

Read More »
Fuses are offered in lead-free versions.
Electrical Fuses

Fuses are offered in lead-free versions.

Designed to withstand high temperatures associated with lead-free wave soldering, lead-free fuses are available in 2AG, SAG, 3AB, and 5 x 20 mm form factors. Fuses comply with electronic industry manufacturing standards for lead-free circuit board content including IEC 60068-2-20, EIA-IS-722 (Low Voltage Supplemental Fuse Qualification Specification), and RoHS. All have CSA and UL approvals.

Read More »
Electrical Fuses

Power Delivery Solutions suit manufacturing automation market.

Power Delivery Solutions protect switched mode dc power supplies against load failures by isolating overloads or short-circuit occurrences from active elements in control panel. WAVEGuard electronic fusing system prevents load failures from propagating back to dc power delivery system, prevents drops in dc power to control panel, and eliminates nuisance-tripping. Solutions also include diode...

Read More »
Electrical Fuses

Fuses offer optional permanent fuse indication.

While providing Class J and RK1 circuit protection, Low-Peak® series facilitates troubleshooting by helping to locate open fuse. Indicator is either black or white to eliminate second-guessing. Products reduce available energy to faulted circuits, provide selective coordination, and minimize arc-flash and arc-blast hazards. Available series include LPJ_SPI, rated 600 Vac, 6-600 A;...

Read More »
Surface Mount Fuses target consumer electronics.
Electrical Fuses

Surface Mount Fuses target consumer electronics.

Available in industry standard 0402, 0603, and 1206 chip sizes, fast-acting fuses provide overcurrent protection on systems using dc power sources up to 125 Vac. They have clear time characteristics of 4 hours min at 100% of rated current, 5 seconds max at 250% of rated current, and 0.05 seconds max at 400% of rated current. Featuring monolithic, multilayer design, RoHS-compliant devices offer...

Read More »
Fuses minimize arc-flash and arc-blast hazards.
Electrical Fuses

Fuses minimize arc-flash and arc-blast hazards.

Low-Peak® Fuses, with optional permanent replacement fuse indication, speed troubleshooting by locating open fuse. Indicator is either black or white, so there is no second guessing. Fuses provide Class J and RK1 circuit protection, time-delay overload protection, and 300,000 A interrupting rating for all commercial and industrial applications. When properly sized and coordinated, units...

Read More »
Precision Fabricating with Over 40 Years of Experience
Sponsored

Precision Fabricating with Over 40 Years of Experience

Quality Sheet Metal specializes in delivering precision, value, and customer service. With a client base that spans many diverse industries and a reputation for excellence that goes back over four decades, our clients know that we can provide the optimal combination of value and flexibility regardless of the challenge. See our video to learn what we can do for you. Through investments in state-of-the-art design, manufacturing, and quality control systems, Quality Sheet Metal remains focused on maintaining a high standard of quality, customer service, and competitive pricing. With an emphasis on customer satisfaction, Quality Sheet Metal is dedicated to establishing long-term partnerships, similar to the ones they currently have with their valued clients. If you're looking for a new partner with extensive capabilities in sheet metal fabricating and finishing, look no further.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers