Electrical Equipment & Systems

Strainers and Valves feature True Union end connections.

Spring-loaded Y Check Valves, Y Check Valves, and Y Strainers are available with True Union end connections to fit Â-½-4 in. pipelines, permitting valves and strainers to be removed from piping system without breaking down system components. All plastic valves and strainers will never stick, jam, or fail from rust or corrosion, and help prevent damage to pumps, filters, and other process...

Read More »

Industrial Ethernet Switches use only 45 mm of DIN-rail space.

Featuring rugged aluminum enclosure and operating temperature of -40 to +75Â-ºC, copper/fiber Industrial Managed Ethernet Switches are offerd with 8, 16, and 24 ports and generate statistics such as data rate, throughput, and number of error frames received. RapidRing Redundancy feature identifies break in Ethernet ring and re-establishes traffic in less than 300 msec. Switches support SNMP...

Read More »
Moxa EDS-726 Receives iF Product Design Award

Moxa EDS-726 Receives iF Product Design Award

Taipei, Taiwan, Dec. 16, 2005-MOXA is pleased to announce that EDS-726 Gigabit Ethernet switch has been awarded the iF Product Design Award 2006 for its user-friendly, modular design. The iF Design Award is one of the most prestigious and distinguished design competitions in the world. In fact, it is often referred to as the design Oscars by industries worldwide. Nearly 2,000 products from 37...

Read More »

Another Chipcon Breakthrough: Announces World's First ZigBee(TM) Compliant System-on-Chip Solutions

Completion of Compliance Testing Gives Chipcon Its Second and Third ZigBee Compliant Hardware and Software Platform - the First Company in the World to Have Three ZigBee-Compliant Platforms LAS VEGAS, CES, Jan. 6 / -- Chipcon AS, the leading provider of low power, low data rate RF-ICs announced today that ZigBee(TM) compliance has been granted to the recently released CC2430ZDK Pro ZigBee(TM)...

Read More »

Switching Power Supplies target IBA applications.

Housed in 3.8 x 6.8 x 1.4 in. U-frame package, eF350 Series delivers both single and quad output power up to 350 W. Units provide synchronous rectification on low voltage outputs from 1.8-12 Vdc with fixed switching frequency of 100 KHz to gain power density exceeding 9 W/inÂ-³. With universal ac input from 85-264 Vac, supplies include active power factor correction and protection against...

Read More »

Pass-Through Terminal Blocks handle currents to 130 A.

Operating over temperature range of -40 to +90Â-ºC, UL-recognized OTB Series is suited for situations requiring transfer of outside high power sources to inside power panels. Products are rated for currents to 130 A @ 660 V per terminal block position, with series availability of up to 15 positions on each side of panel. Accepting 1-8 AWG wire range, series features external terminal covers...

Read More »

Junction Boxes interconnect up to 8 strain gage load cells.

Offered in standard and stainless steel versions, Junction Boxes are fitted with integral resistor network, enabling units to support corner load adjustment in scale. Boxes feature metric M12 EMC cable glands for cable diameters of 4-6.5 mm and two M16 EMC glands for cable diameters of 5-9 mm. Glands use screening design and are 100% EMC-proof according to EN 45501.

Read More »
Safety Switches are compliant with IEC/EN 60947-5-1.

Safety Switches are compliant with IEC/EN 60947-5-1.

Available with hinge operator, slotted lever, or key operated, plastic KB Series and metal KM Series offer interchangeable operating heads and wide selection of contacts. Auxiliary contacts are interchangeable and removable to facilitate wiring. In addition to meeting international standards, switches are cUL listed.

Read More »

Junction Box suits explosion-proof applications.

Measuring 4 x 4 in., GUP Explosion-Proof Enclosure is available in 2 configurations. Model GUP214-TB features ten Â-¾-in. NPT hubs with 7 conduit plugs, and Model GUP215-TB features six Â-¾-in. NPT hubs with 3 conduit plugs. Both have 2 hubs on top and bottom, and 1 hub on each side. Body is constructed of electro-galvanized ductile iron finished in aluminum acrylic paint, and cover is...

Read More »

Limit Switch suits position indication applications.

Housed in RoHS-compliant package, GLL Electromechanical Limit Switch offers global seal ratings of IP65 and NEMA 13. It provides access to wiring terminal block via hinged cover and features double insulated housing, so no ground is required. Unit is suited for OEM applications including elevators, escalators, aerial platform lifts, packaging equipment, and industrial doors.

Read More »

All Topics