New Electrical Equipment & Systems Products

Stepping Motor System provides high-accuracy positioning.

Miniature PMC Series 5-phase hybrid system includes printed-circuit driver board and miniature harmonic drive. Motors have zero-backlash harmonic gearheads in 50:1 (PMC33A1-HG50) and 100:1 (PMC331A1-HG100) gear ratios. Basic step angle performance reaches 0.0072Ã-

Switching Power Supply is fully enclosed.

SCN-Series provides output power over 600 to 2,000 W range. Series accepts input from 90 to 260 Vac and 23 models provide single outputs from 5 to 48 Vdc. Soft-start circuitry, remote sense and control functions, and integral EMI filtering are standard. SCN-Series has integral power-good LED indicator and output adjustment potentiometer. It operates over ambient temperature range of 0 to +50Ã-

Power Modules provide integrated dual AC and DC input.

C0818D packet-switched backplane enclosure and C0814D high-density enclosure accept hot-swap input power control modules. Modules plug into computer backplane from rear of computer chassis. Both AC and DC modules provide 800 W of cross-feed redundant input power required by system power supplies. Power supplies will, in turn provide 600 W of N+1 redundant system power. Units are IEEE 1101.10/11...

Mobile Battery Charger improves battery life.

Model CTC328 Versa Volt Smart Charger plugs into any 12 Vdc vehicle outlet. Microprocessor monitors state of battery pack every 10 seconds to ensure battery is fully charged. Smart technology inhibits unit from charging hot battery pack and stops charging based on state of charge, not battery pack temperature. Fast charging takes only 45 minutes. Red light indicates unit is charging, while green...

Seal Stuff In, Seal Stuff Out

One of the best ways to make sure that your machinery stays up and running in the face of adversity is to make sure that it's properly sealed. Of course, it's not always easy to determine whether the integrity of your seals are up to par. How can you tell when you have a problem?

Connectors resolve space, mating, and assembly problems.

Custom engineered connectors provide interconnectivity solutions for power and signal applications. Brackets, terminal blocks, male/female contact assemblies, machined metal base housings, DIN rails, shunts, and protective covers can be custom built to meet specific capacity and environmental requirements. They can also conform to IEC and military specifications and be UL listed.

Switch provides remote reboot.

Model 4403 allows user to remotely perform power cycle reboot on 4 systems by controlling four 115 Vac power outlets. Devices can be individually selected and power can be removed from device for user-selected time (15, 30, 45, 60 sec), after which power is returned. Start of reboot can be immediate or after programmable delay of 15, 30, or 60 min. All reboot commands are done from terminal...

Plastic Enclosures protect computers and electronic equipment.

Enclosures are available in ABS, PVC, or HDPE. They are designed to protect computers, barcode label printers, and touchscreens in harsh or dusty environments. Enclosures are resistant to corrosion, dents, and scratches. Most models are available in NEMA 12 or 4X designations. NEMA 4X models prevent any liquid or vapors from entering and coming in contact with equipment inside.

DC Motors/Gearmotors feature skewed armatures.

LO-COGÃ-® Series 8000 brush-commutated DC motors and gearmotors feature 7-slot skewed armatures designed to minimize magnetic cogging. Motors are available in 3 lengths and can achieve peak torques up to 16.8 oz-in. and speeds to 10,650 rpm. Gearmotors are offered in 3 lengths with 11 ratios from 6.3:1 to 1803.6:1 and can achieve peak torques to 100 oz-in. (standard) or 160 oz-in. (with...

Stepping Motor offers integrated motion control.

NEMA size 23 stepping motor, MDrive23, offers on-board +12 to +48 V microstepping drive and programmable MDrive 23 motion control. Features include four 5 to 24 V general purpose I/0 lines, one 10 bit analog input, and 0 to 5 MHz step clock rate. Microstep resolution is rated up to 51,200 steps per revolution. MDrive23 Motion Control communicates over RS485, and baud rates range from 4,800 to...

Digital Temperature Switch replaces mechanical thermostats.

Series TS is designed to replace bulb and capillary temperature switches in heating and cooling applications. It includes 3-digit display, 16 A SPDT relay output (3/4 hp), 110 Vac input power, 3 ft temperature sensor, adjustable hysteresis, and defrost cycle programming. With NEMA 4 enclosure and Ã-

Simple Connection � MGB with EtherNet/IP

The new MGB with EtherNet/IP is a leap forward in access door safety. Designed for easy installation, flawless performance, and long service life, it is engineered with robust features and cutting-edge technology that places it firmly at the leading edge of the door safety device industry. To learn all about the benefits of the Euchner MGB, see our video.