Electrical Equipment & Systems

22mm DC Motor promotes heat dissipation.
Motors

22mm DC Motor promotes heat dissipation.

LO-COG 22mm brush-commutated DC motor is 1.900 in. in length and employs 5-slot armature design and bonded neodymium iron boron magnets. It is suitable for mass data storage and semiconductor processing equipment. Standard cartridge assemblies prolong brush life by maintaining optimum brush force.

Read More »
Stepping Motor Drive IC operates in -20 to +75° C range.
Motors

Stepping Motor Drive IC operates in -20 to +75° C range.

Model FAN8200 2-channel drive IC is manufactured using bipolar process. Integrated dual H-bridge drivers with vertical PNP power transistors result in low saturation voltage (0.4V @ 0.4A) and optimum thermal characteristics (Vcc = 2.5V ~ 7.0V). Unit features built-in shoot-through current protection and thermal shutdown (TSD) function. FAN8200 accommodates 3.3 or 5V MPU control input, and...

Read More »
Power Supplies provide 600 W and meet FCC standards.
Power Supplies

Power Supplies provide 600 W and meet FCC standards.

RKW 600 Watt series of industrial grade single output, low noise power supplies meet FCC Class B3, VCCI Class B, EN 55011-B and EN 55022-B limits for conducted and radiated emissions with no external filtering required. They provide 3.3-48 Vdc outputs from 85-264 Vac with power factor correction. Supplies have remote on-off control, remote voltage control from zero to maximum output voltage, and...

Read More »
Circuits

Parallel FIFO takes unlimited amount of data.

Radiation shielded Model 7206F high-speed Epi-CMOS FIFO microcircuit is organized so that data is read in same sequential order that it was written, and Full, Half Full, and Empty Flags are provided to prevent overflow and underflow. Expansion logic allows unlimited expansion capability in word size and depth with no timing penalties. Twin address pointers automatically increment with write and...

Read More »
DC-DC Converters offer wide temperature operation.
Power Supplies

DC-DC Converters offer wide temperature operation.

Single-output, surface-mount NTE Converters are 1W devices that operate across industrial temperature range (-40 to 85°C) without external cooling. They feature 3V input and single, isolated output of 3.3 or 5V. Units have input-to-output isolation of lkVDC and are based on SMD construction that incorporates multi-layer capacitors and toroidal magnetics. Converters are packaged in UL 94V-0...

Read More »
Contactors and Relays handle up to 630 A.
Relays

Contactors and Relays handle up to 630 A.

Large frame Sirius 3R contactors and overload relays for motor controls are available in 3 sizes rated from 115 to 500A. Contactors have easy access ac/dc coil system with universal current coil rated for both ac and dc voltages. Only 13 different coil ranges cover control voltages from 24 to 600V ac and dc. Overload relays are rated from 50 to 630 A full load and are available in starter or...

Read More »
Lithium Batteries retain power for 10 years.
Batteries

Lithium Batteries retain power for 10 years.

Coin-type lithium primary cells exhibit uniform discharge voltage and retain 90% of their capacity after 10 yrs. They have 3V energy density, provide from 35 to 560 mAhr capacity depending upon size and construction, and operate over -20° to 70° C temperature range. Cells are available in sizes from 4.8 to 24.5 mm dia. and 1.4 to 5.0 mm high with variety of contact configurations,...

Read More »
Junction Boxes feature single door style with clamps.
Electrical Boxes

Junction Boxes feature single door style with clamps.

HV Series High Voltage Junction Boxes are available in stainless steel 316L and 304 and polyester powder-coated carbon steel. Enclosures resist impact and prevent possibility of excessive heat and ingress of water or dust, preventing explosions. 1 x 1 Connection Series is for shielded or unshielded cables up to 8kV at 500A, while 2 x 2 Connection Series is for 2 parallel, unshielded cables up to...

Read More »
Precision Fabricating with Over 40 Years of Experience
Sponsored

Precision Fabricating with Over 40 Years of Experience

Quality Sheet Metal specializes in delivering precision, value, and customer service. With a client base that spans many diverse industries and a reputation for excellence that goes back over four decades, our clients know that we can provide the optimal combination of value and flexibility regardless of the challenge. See our video to learn what we can do for you. Through investments in state-of-the-art design, manufacturing, and quality control systems, Quality Sheet Metal remains focused on maintaining a high standard of quality, customer service, and competitive pricing. With an emphasis on customer satisfaction, Quality Sheet Metal is dedicated to establishing long-term partnerships, similar to the ones they currently have with their valued clients. If you're looking for a new partner with extensive capabilities in sheet metal fabricating and finishing, look no further.

Read More »

All Topics