New Electrical Equipment & Systems Products

Motion Controller Kits target OEMs.

Offering PowerBrick power circuit technology, 15 kV Allen-Bradley Bulletin 1503E medium voltage SMC Flex OEM component kits suit OEMs and power intergrators using motors from 10-14.4 kV at 200 and 400 A ratings. Fiber optic multiplexer board accommodates gate drive signals for up to 36 silicone controlled rectifiers and kits also include voltage feedback system. They limit starting torque and...

Soldering Iron Maintenance Kits promote heat transfer.

Prolonging life of industrial soldering irons, Soldering Iron Maintenance Kits include everything necessary to remove flux residue, contamination, and oxidation that builds up between inside of iron's heating element and surface of tip. Each kit contains spiral brush with Ã-¼ in. hex shank to fit most drills, steel wire brush, and non-woven abrasive pads that wrap around tip's shank. Five...

RF Modules provide switching to 3 GHz.

Available in partial build configurations, Model 40-870 provides up to 6 Off SPDT switches in single width 3U PXI module, while Model 40-872 provides up to 4 Off 4-way MUXs in single-slot 3U PXI module, and Model 40-874 offers one or two 8-way MUXs in single-slot 3U PXI module. Featuring single or dual 22 x 2 matrix with loop thru connections, Model 40-877 permits larger matrices to be...

M12 Field Attachable Connector is made of stainless steel.

Rated to IP67, stainless steel version of 713 series is suited for use in harsh environment applications, food processing equipment, and any application requiring industry standard connection. All metal components are machined from stainless steel, and outer surfaces are smooth to facilitate cleaning. Available with 4 or 5 contacts, connectors accept cable with 6-8 mm OD. Screw termination is...

Seal Stuff In, Seal Stuff Out

One of the best ways to make sure that your machinery stays up and running in the face of adversity is to make sure that it's properly sealed. Of course, it's not always easy to determine whether the integrity of your seals are up to par. How can you tell when you have a problem?

FCI Thermal Mass Flow Switches and Flow Meters Receive IEC Approval

Precision Flow Instruments for Air, Gas and Liquid Service San Marcos, CA-June 29, 2007-Designed for precision flow switching and flow measurement in rugged industrial applications, FCI's FLT93 Switch, ST98 Flow Meter, and GF90 and GF92 Flow Meters have received IEC/IECx approvals for their safe use from the International Electrotechnical Commission (IEC). The IEC prepares and publishes...

Variety of Bulkhead Mount SMA Connectors in Stock for OEM Applications

RF Connectors, division of RF Industries, offers a variety of SMA bulkhead mount connectors for use in OEM applications. Mounting configurations include front and rear mount with solder cup electrical terminations. Male and female SMA connector interfaces are available. Connector bodies are machined brass with nickel of Gold plating. All dielectrics are PTFE with Gold plated contacts. Part...

Power Cords feature multi-leg design.

Available in many different configurations and lengths to handle different voltages and amperages, Y and W Cords are designed to power 2 or 3 different units while only drawing power from one outlet. RoHS-compliant cords provide adequate power cabling without creating surplus of cables that require additional AC outlet and can become tangled.

Softstarters communicate in multiple fieldbus protocols.

Incorporating FieldBusPlug communication system, PSR Series Softstarters are available in 3 sizes with widths from 1.77-2.13 in., covering rated currents from 3-45 A, up to 600 Vac, and with control voltages of 24 Vdc or 100-240 Vac. Devices include integrated by-pass, marked front panel with knob adjustments for 3 operational settings, and marked connection terminals. Cooling fan can be attached...

Load Switches feature current limits up to 1,500 mA.

Available in 2 x 2 mm, green-compliant MicroFET(TM) MLP package, IntelliMAX(TM) FPF214X and FPF216X Series provides thermal dissipation and full system protection for portable applications operating between 1.8 and 5.5 V. Units integrate 0.11 W current-limited P-channel MOSFET with thermal shutdown, controlled turn-on, reverse-current blocking, and UVLO. Power Good signal indicates stable output...

PCB Connectors suit high voltage applications.

Suited for wire-to-board applications, GMSTB(A) 2.5 HC(V) consists of high-voltage header and plug with screw connection. It features 7.62 mm pitch and voltage ratings of 1,000 V IEC, 600 V UL. Integrated double-steel covering springs provide contact safety even at high power, severe temperature fluctuations, and in high-vibration environments. Available with 1-12 positions, MKDS 5 HV fixed PCB...

SEALTITE® Fittings and Cord Grips Offer Longer Lasting Protection

Anamet Electrical's 316 Stainless steel SEALTITE® fittings and UL-listed cord grips protect sensitive wiring components from fluids, corrosive contaminations, bumps, and abrasions with a steel core and liquid tight conduit jacket. Check out this video to learn more.