New Electrical Equipment & Systems Products

Non-Latching Relays are built in accordance with MIL-PRF-6106.

Designed for environmentally demanding aerospace and military applications, FCA-150 and FCAC-150 series of relays offer 50 A of switching capability in one cu-in. package weighing less than 90 g. Configured as single-pole, single-throw devices with normally open contacts, Mil-R-6106 compliant, hermetically sealed units are rated for temperatures from -70Ã-

Power Supply offers universal 90-264 Vac input range.

Designed for worldwide use, Model XCSD50C class 2 single-phase 2.5 A, 24 Vdc output power supply has efficiency rating of 90%. It features built-in short circuit, overload, over temperature, and over voltage protection. Unit dissipates very little heat and works well in small low profile enclosures.

Broadband SPDT Switch can handle up to 20 W of CW power.

Designed for WiMAX, LTE and high linearity/power applications, MASW-000825-12770T, HMICTM PIN diode SPDT switch offers broadband operation in range of 50 MHz to 6 GHz. High-Power T/R Switch achieves 30 dB of Tx to Rx isolation with less than 0.3 dB of associated insertion loss and 64 dBm IIP3 for 2.3-2.7 GHz WiMAX band. Product is available in 3 mm PQFN package.

Electric Hose Reels offer remote control operation.

Available in models ranging from basic to full-function, 12 Vdc, 1/3 hp RM Reel Series handles single 3/8-Ã-½ in. ID hose. Units take power-out off reel, leave power-in on remote, and leave full-speed control functionality on base unit. Variable speed control lets user select optimal unwind/rewind speed, and full molded chain guards are standard. Offering 2,000 ft range, bi-directional remote...

A Solutions Provider

This white paper provides an overview of filtration and energy solutions.

H15 Female Pressfit PowerDIN

15 pins at 15 A/pin in low profile pressfit variation. 2E introduces the H15 female connector in pressfit variation. H15 DIN 41612 connectors have 15 pins rated at 15 amps per pin. The standard version has 30 pressfit pins (2 per contact) suitable for PCB thicknesses greater than 1.6mm. A special variation suitable for mains power supplies (also depicted here) has faston pins in position 28, 30...

Moeller Offers Ready-Made Enclosed Motor Starters

Houston, TX- January 14, 2009 Moeller has addressed the market for acquiring a ready-to-use enclosed motor starter within minutes of walking into a distributor showroom. Moeller's SYST-M line of ready-made motor starters is typically available from distributor stock and is suitable for a variety of industrial applications to 60HP (@575V). Their fully modular design includes only three parts which...

PEEK Drawn Fiber offers abrasion and corrosion resistance.

Available in strands ranging from .003-.040 in., PEEK Drawn Fiber comes in natural, black, red, green, yellow, blue, orange, and violet to meet specific industry requirements for braiding identification. Woven braiding creates sleeve that can be placed over existing wire assemblies to guard against chaffing. Able to perform in temperatures up to 480Ã-

LED Light Bulbs suit indoor lighting applications.

Compliant with UL standards, EnergyLED E26 bulbs use 4.6 W to generate 160 lumens of light. They are available in 2,800 K warm white, 5,200 K full spectrum white, and 6,000 K cool white, as well as red, green, blue, and yellow colors. Offering life of 50,000 hr, bulbs are suited for use in store fronts and point of purchase displays where illumination is needed for long hours and may be changed...

Wireless I/O Relay Modules do not require PC connection.

Supplied in NEMA4 enclosure, Model WWP-IIRO-8 features one pair of intelligent 16-channel DIO units that communicate directly with each other. Each unit contains 8 Form C (SPDT) electromechanical relays and 8 optically isolated digital inputs. When isolated input is toggled on one of units, it will cause corresponding relay to switch on other unit. Operating distances are rated up to 7 miles...

Press-Fit Connector System addresses coplanar applications.

High-density ZipLine(TM) connector system includes right-angle signal header module, which is designed to mate with existing right-angle signal receptacle module. It provides 216 individual contacts and enables 72 high-speed differential connections between coplanar circuit boards. This adds to connector system's existing support for backplane and orthogonal midplane applications. Complementary...

Does Your Parking Lot Make a Good First Impression?

To enhance its appearance by removing oil stains, Terminator-HSD uses micro bacteria to remove the stain without harsh chemicals, acids, or detergents. Check out the video to learn more.