Electrical / Electronic Probes

Electrical / Electronic Probes

Frost & Sullivan Lauds Rohde & Schwarz for Standing Out in the Oscilloscopes Market through Innovations and Value Additions to its Product Portfolio

Despite the stranglehold of the top participants, Rohde Schwarz leveraged its RD expertise to successfully penetrate the oscilloscope market London, U.K.Â- – Based on its recent analysis of the oscilloscopes market, Frost & Sullivan recognises Rohde & Schwarz with the 2015 Global Frost & Sullivan Award for Competitive Strategy Innovation and Leadership. Within just five years of entering...

Read More »
Current Probe provides sensitivity down to 1 mA/div.
Electrical / Electronic Probes

Current Probe provides sensitivity down to 1 mA/div.

Sensitivity of CP030A and CP031A probes, which feature respective bandwidths of 50 and 100 MHz, lets users measure current from mA range up to 30 Arms continuous and 50 A peak, all with same probe. Accommodating space restrictions on crowded boards, design includes jaws sized to probe currents in tight spaces while retaining ability to clamp onto up to 5 mm dia conductors. Both probes connect to...

Read More »
Electrical / Electronic Probes

Measurement Techniques

Line Regulation Measure the output voltage at rated load and at 25 Deg C ambient. Record output voltage with input voltage at low line, nominal and high line. Line regulation is defined as the maximum of the two deviations of output from the value at nominal input. This value is typically specified in percent. Measurements should be taken as quickly as possible so that internal temperature...

Read More »
Tone Generator/Probe Set facilitates cable tracing.
Electrical / Electronic Probes

Tone Generator/Probe Set facilitates cable tracing.

With steady tone, recessed push-to-scan button, and clear loudspeaker, Tone and Probe Set (P/N TP150) lets user trace and identify cable locations on jacks or through walls. Tapered probe tip facilitates penetration of wire bundles, and thumbwheel probe volume controls volume and turns off power to reserve battery power. Sensitivity of 100 Hz~300 KHz. Tone generator features includeÂ- slide...

Read More »
Electrical / Electronic Probes

Keysight Technologies to Feature New IntegraVision Power Analyzer at APEC 2015 EXPO

SANTA ROSA, Calif.,Â- – Keysight Technologies, Inc. (NYSE: KEYS) will demonstrate the new PA2201A IntegraVision Power Analyzer and other power test products at APEC 2015 EXPO, Booth 432, Charlotte Convention Center, Charlotte, North Carolina, March 16 - 18. Keysight experts will demonstrate: The Keysight IntegraVision power analyzer, an intuitive combination of accurate power measurements...

Read More »
Electrical / Electronic Probes

Differential Probes are designed for high-speed bus testing.

Intended for general-purpose, high-speed differential bus probing, N7000A InfiniiMax III+ differential probes work with all InfiniiMax III probe heads and incorporate InfiniiMode technology to enable measurement of all components ofÂ- differential signal. Unique S-parameters of each InfiniiMax III+ probe amp are stored in probe amp and used with S-parameters of various probe heads to further...

Read More »
Electrical / Electronic Probes

Current Probe evaluates switch mode power supplies.

At 100 MHz bandwidth, R&S RT-ZC20B Current Probe can measure AC and DC of max 30 A (RMS)/50 A (peak) current with resolution of 10 mA. Via probe interface, R&S RTO, R&S RTE, and R&S RTM oscilloscopes automatically detect up to 4 current probes connected in parallel. Instruments also automatically adjust vertical scaling and zeroing settings. Degaussing function is activated directly on...

Read More »
See Acculogic's Limited Access Test Systems at APEX
Electrical / Electronic Probes

See Acculogic's Limited Access Test Systems at APEX

Markham, ON –Â- Acculogic Inc., a global leader in electronic production test solutions, announces that it will exhibit in Booth #1601 at the 2015 IPC APEX EXPO, scheduled to take place Feb. 24–26, 2015 at the San Diego Convention Center. Company representatives will be available to discuss the following equipment: • The FLS980 Series III with the Ultimate Accuracy Package Option along...

Read More »
Seica Inc. Announces Participation at Apex, February 24-25, 2015, Booth # 1127, San Diego, CA
Electrical / Electronic Probes

Seica Inc. Announces Participation at Apex, February 24-25, 2015, Booth # 1127, San Diego, CA

Salem –Â- Seica Inc. will be exhibiting our new line of flying prober, the Pilot 4D line which will be represented at the show by the Pilot 4DV8 and Pilot FX. The Pilot 4D line represents the latest in technology in flying probe testing for both ICT, functional testing and data regeneration applications. The Pilot 4DV8 will show the latest features for automotive and LED light testing...

Read More »
Oscilloscope Probes serve high-voltage signal measurement.
Electrical / Electronic Probes

Oscilloscope Probes serve high-voltage signal measurement.

WhileÂ- N2804A differential probe offers up to 300 MHz bandwidth and ±300 Vdc + peak AC of max differential input range, N2805A 200 MHz differential probe comes with 5 m input cable for reaching DUTs over extended distances. Probes have differential input resistance of 4 MΩ and input capacitance of 4 pF. As 100:1 passive probe with 66.7 MΩ input resistance,...

Read More »
Let Our Safety Experts Lower Your Risk
Sponsored

Let Our Safety Experts Lower Your Risk

Elite Technical Services provides your company with qualified and experienced safety experts. Specializing in confined space and high-angle technical rescue and jobsite hazard assessment, your workplace safety is the top priority. Check out the video to learn more.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers