Electrical / Electronic Probes

Electrical / Electronic Probes

FPGA Dynamic Probe speeds digital debug time.

Model N5397A interacts with on-chip virtual probing technology, enabling Infiniium Mixed-Signal Oscilloscopes to capture up to 32 internal FPGA signals for each debug pin correlated to external analog activity. Up to 512 internal probe points can be accessed inside FPGA without changing design. Automatic mapping of internal signal names from FPGA design tools to MSO provides identification of...

Read More »
Electrical / Electronic Probes

Oscilloscope/Probe System offers max bandwidth of 13 GHz.

Infiniium DSO80000 Series oscilloscopes and InfiniiMax II Series probing measurement systems include 10, 12, and 13 GHz versions. Providing max sample rate of 40 GS/sec, real-time systems can capture frequency harmonics and make accurate measurements on high-speed signals. Software packages match oscilloscope to specific measurement needs, including second-generation jitter analysis, serial data...

Read More »
Electrical / Electronic Probes

Hand-Held USB-Powered Scope offers 5 instruments in one.

Swordfish(TM) probe combines functions of 5 MHz oscilloscope, 20 kS/s data logger, FFT spectrum analyzer, volt meter, and frequency meter. Spring-loaded probe tip can be removed to reveal phono/RCA socket; phono-to-BNC adapter is also supplied. Product features 10-bit ADC with true sampling rate to 40 MS/sec and hardware triggering. Over-sampling feature of included EasyScope II software allows...

Read More »
Electrical / Electronic Probes

Logic Analysis Probe hastens Pentium 4 processor-based designs.

Agilent E8045B provides visibility into Pentium 4 system bus, accelerating design of products based on Intel® Pentium® 4 processor in 775-land package. Probe enables connection of logic analyzers to LGA775 processor with minimal mechanical and electrical intrusion. Equipped with electrically passive probe interface adapter, product aligns source-synchronous, quad-pumped data lines and...

Read More »
Fused Probes feature IP2X protection.
Electrical / Electronic Probes

Fused Probes feature IP2X protection.

Series CT3220 features plastic body containing Type CC ceramic fuse with 2, 6, 10, 15, or 20 A rating. Tips, which have 4 mm banana plug contact springs, are covered by clear plastic insulated sheath, which locks in closed position. Neon indicator light glows when probing live circuit and fuse is open or missing. Fuse will cutoff short-circuit current in less than Â-¼ cycle and can withstand...

Read More »
Impedance Converter Kit permits use of probe with DMM.
Electrical / Electronic Probes

Impedance Converter Kit permits use of probe with DMM.

Model CT3197 adapts High Voltage Oscilloscope Probe Model CT2982 for use with standard digital multimeter. Kit, comprised of BNC feed-through terminator and BNC-to-4 mm banana plug adapter, features DC-to-50 MHz bandwidth, 1 W max working power, and ±0.25% accuracy. By utilizing both components of kit to connect probe and DMM, BNC feed-through terminator matches impedance for proper...

Read More »
Analyzer Probes are compatible with multiple finishes.
Electrical / Electronic Probes

Analyzer Probes are compatible with multiple finishes.

Pro Series soft touch, logic analyzer probes enable direct connection from probe to targets on PCB without use of connector. They use micro spring-pin technology with 4-point crown tip that can pierce any contamination on board and provide redundant contact. Top-mount retention module accommodates varying PCB thicknesses. Probes are compatible with lead-free finishes such as organic-coated...

Read More »
Electrical / Electronic Probes

Resistivity System determines presence of oil and gas.

Centerfire(TM) Resistivity System provides formation evaluation data while hole is being drilled. MWD probe mounted above resistivity collar facilitates retrieval and data transmission to surface. Tool combines multiple transmitter spacings and separate frequencies for accurate and stable readings, and is available in sizes with 4.75, 6.75, and 8.25 in. OD. System operates at temperatures to...

Read More »
Test Probes have screw-on alligator clips.
Electrical / Electronic Probes

Test Probes have screw-on alligator clips.

Model 6723 Test Probes with screw-on alligator clips have 8-32-UNC 2A-threaded tips designed for secure attachment to test probes, providing stable measurements for consistent test results. Silicone-insulated leads are rated at IEC1010 1000 V CAT III for probe alone, and screw-on alligator clip Model 6723 is rated at 300 V CAT II with 10 A current max. Temperature range is 14 to 221°F, and...

Read More »
Logic Analyzer Probe has 7 x 22 mm footprint .
Electrical / Electronic Probes

Logic Analyzer Probe has 7 x 22 mm footprint .

Model E5396A is 17-channel, single-ended connectorless soft-touch probe compatible with company's logic analyzers that use 40-pin connector interface. Model E5398A soft-touch probe is compatible with logic analyzers that use 90-pin connector interface. Spring-pin technology ensures reliable connection without need for special cleaning or surface finishes of probe pads. Probes suited for...

Read More »
Sponsored

Simple Connection MGB with EtherNet/IP

The new MGB with EtherNet/IP is a leap forward in access door safety. Designed for easy installation, flawless performance, and long service life, it is engineered with robust features and cutting-edge technology that places it firmly at the leading edge of the door safety device industry. To learn all about the benefits of the Euchner MGB, see our video.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers