Electrical / Electronic Probes

Blast Pressure Pencil Probe features 1 µsec response time.
Electrical / Electronic Probes

Blast Pressure Pencil Probe features 1 µsec response time.

Designed for broad range of explosion, blast, and shock wave testing, Series 137A Quartz, free-field, ICP® Blast Pressure Pencil Probe has 500 kHz resonant frequencies. High-level 5 V output signal is capable of driving cable runs hundreds of feet in length, to safe zone for data acquisition. Featuring integral microelectronics that provide high signal-to-noise ratio, sensor can be used to...

Read More »
Electrical / Electronic Probes

RF Production Probe Card utilizes membrane probe technology.

Designed to aid in high-volume wafer testing of RF filters and switches for mobile handsets, 20 GHz P30 Pyramid Probe card has scalable architecture and is sized to enable multi-site testing. Solution's lithographic probes alleviate uncontrolled impedance and Microscrub(TM) creates small scrub mark that minimizes material displacement. Applications include multi-die testing for RF wireless,...

Read More »
Electrical / Electronic Probes

Flying Probe Test System examines 2 UUT sides simultaneously.

Compact, ergonomic Pilot V8 features vertical architecture enabling high speed, high-precision probing on both sides of UUT simultaneously. It is equipped with 8 electrical flying test probes, 2 Openfix capacitive and 2 power flying probes, plus 2 CCD cameras. Featuring full range of in-circuit and functional test capabilities, system can also implement net-oriented measurement techniques and can...

Read More »
Electrical / Electronic Probes

Dual Cold Probe minimizes 13C NMR experiment analysis time.

Designed for use with Varian NMR System in 13C detected NMR experiments, XSens(TM) Probe accommodates researchers in pharmaceutical, agricultural, chemical, and academic laboratories involved in characterization of quantity-limited samples of natural products, reaction intermediates, metabolites, and trace contaminants. Its 1H sensitivity minimizes acquisition time for 1H detected experiments,...

Read More »
Electrical / Electronic Probes

Double Resonance Probe facilitates NMR laboratory operation.

Suited for analytical and research chemists performing range of common 1D and 2D NMR experiments involving liquid-state samples, OneNMR(TM) Probe lets users employ one probe for various direct and indirect applications. Lock sensitivity as well as 1H and 13C sensitivity minimize time required for analysis or alternatively enable analysis of samples where quantity is limited. Water suppression and...

Read More »
Electrical / Electronic Probes

Measurement Switching Probe provides 20 GHz bandwidth.

Model P7520 TriMode(TM) allows users to debug and validate 3rd harmonic of 10 Gbps signals and do compliance testing to 5th harmonic on signals up to 8 Gbps. It enables engineers to switch between differential, single-ended, and common mode measurements without moving probe connections. Streamlined so that several probes are able to fit into confined spaces, needle-nose handheld style probe...

Read More »
Electrical / Electronic Probes

Symmetricom's V-FACTOR® Q-400 Probe Receives Test & Measurement World's 2008 'Best in Test®' Award

V-FACTOR Offers Complete Quality of Experience (QoE) Solution for Monitoring Video and other Triple Play Services SAN JOSE, Calif. - February 11, 2008 - Symmetricom, Inc. (NASDAQ: SYMM) today announced that Test and Measurement World Magazine (www.tmworld.com) selected Symmetricom's V-FACTOR® Q-400 Probe for its 2008 Best in Test®" Award within the Video Test category. The 2008 Best...

Read More »
Electrical / Electronic Probes

Test Socket is designed for devices up to 13 sq mm.

Available in 4 versions with ratings of 1-3, 3-5, 5-9, and 10-18 GHz, high frequency center probe test socket is suited for manual, high-speed testing of devices such as CSP, mBGA, and Flash, with pitches as low as 0.40 mm. Measuring 1.200 x .840 x .440 in., it provides minimal signal loss for higher bandwidth ability via signal path of 0.077 in. Contact forces are 16 g per contact on 0.50 mm...

Read More »
Electrical / Electronic Probes

Denso Selects Tektronix for Automotive Test Solution

Largest Japanese Automotive Electronics Manufacturer Uses Tektronix DPO7000 Oscilloscopes and TDP1000 Probes to Enable Nanosecond-Order High Frequency Analysis BEAVERTON, Ore., Jan. 22 -- Tektronix, Inc., a leading worldwide provider of test, measurement and monitoring instrumentation, announced that both its DPO7000 Series Oscilloscope and TDP1000 High Voltage Differential Probes are being used...

Read More »
Electrical / Electronic Probes

BGA Probes enable DDR2 and DDR3 testing and evaluation.

Offering direct access to balls of DRAM with minimal loading or impact to signal integrity, DDR2 and DDR3 BGA probes provide signal access points to clock, strobe, data, address, and command signals of DDR3 DRAM for true compliance testing with oscilloscope. Logic analyzer provides timing and protocol view of DRAM activities. DDR2 BGA probe enables simultaneous access to oscilloscope and logic...

Read More »
Cut and Bevel Pipe up to 63" Diameter with a Single Lightweight, Portable Machine
Sponsored

Cut and Bevel Pipe up to 63" Diameter with a Single Lightweight, Portable Machine

CS Unitec is a leader in power tools designed for industrial applications, with products that set the standard for robust performance and industry-leading reliability. Adding to our long list of innovation is a new line of pipe cutting machines. For cutting and beveling pipe up to 2" in thickness and diameters from 12" to 63", no other cutting system comes close. See our video to learn more.

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers