Electrical / Electronic Probes

Debug Probe and IDE fosters ARM Cortex-M3 MCU integration.
Electrical / Electronic Probes

Debug Probe and IDE fosters ARM Cortex-M3 MCU integration.

ST-LINK debug probe with Atollic TrueSTUDIO® IDE allows low-volume designs to target 70+ STM32 ARM® Cortex(TM)-M3 based MCUs. After connected to target via USB, probe leverages development tool's variety of design starts, including tentative and low-volume product concepts. IDE uses Eclipse(TM) IDE framework and features GNU compiler/debugger for ARM processors. Pre-compiled runtime...

Read More »
Electrical / Electronic Probes

Cascade Microtech Secures Production Test Win at Top Producer of LED Devices

Summit 12000 HS probe station chosen for its flexibility and throughput capabilities BEAVERTON, OR - August 18, 2009 - Cascade Microtech, Inc. (NASDAQ: CSCD) today announced that a leading light-emitting diode (LED) manufacturer has selected its high-speed Summit 12000 HS probe system for production test. Cascade Microtech's Summit 12000 HS was chosen for its system flexibility to test a broad...

Read More »
Electrical / Electronic Probes

Cascade Microtech Expands Capabilities of On-Wafer Power Device Characterization

Collaborative Engineering Efforts Provide Full Compatibility of Agilent B1505A on Tesla System BEAVERTON, OR, June 15, 2009 - Cascade Microtech, Inc. (NASDAQ: CSCD) today announced a set of new probes and accessories for its Tesla on-wafer power device characterization system, making it fully compatible with the recently released Agilent B1505A power device analyzer. The combined solution offers...

Read More »
Electrical / Electronic Probes

Cascade Microtech Announces First Complete Engineering and Production Probing Solutions Enabling High-Volume 60-80 GHz RFIC Manufacturing

Complete probing solution for mmW RFIC test meets the complex requirements of automotive radar and wireless HDTV device test BEAVERTON, OR - June 8, 2009 - Cascade Microtech, Inc. (NASDAQ: CSCD) today announced the release of two products that streamline engineering and production testing of high-bandwidth, short-range RFIC devices for WirelessHD(TM), automotive radar, and other 60 GHz wireless...

Read More »
Electrical / Electronic Probes

King Abdullah University of Science and Technology Selects Cascade Microtech for Materials Analysis and Semiconductor Research

First probe stations installed in Saudi Arabia to be used to promote global research and science achievement Beaverton, OR, USA, (September 24, 2009) - Cascade Microtech, Inc. (NASDAQ: CSCD) today announced King Abdullah University of Science and Technology's selection of multiple probe stations to support measurements in the area of materials analysis, nano-technologies and semiconductor...

Read More »
AC Current Transformers suit confined space applications.
Electrical / Electronic Probes

AC Current Transformers suit confined space applications.

Composed of flexible sensor and electronic module, MiniFlex(TM) MF 300-6-2-10 and MF 3000-10-2-1 have mV output proportional to current measured for direct readings on DMMs, data loggers, oscilloscopes, and power or harmonic meters. Units are insensitive to DC currents and only AC component of signal is measured. Available in 6 and 10 in. lengths, sensors are insulated for 1,000 V CAT III; 600 V...

Read More »
Electrical / Electronic Probes

Active Differential Probes target RF/Microwave instruments.

Models U1818A and U1818B feature high differential input impedance from 100 kHz to 7 or 12 GHz, respectively, and are compatible with Agilent network, spectrum, and signal source analyzers. Devices provide frequency response of ±1.5 dB and noise less than -130 dBm/Hz at 10 MHz to 12 GHz. They also feature biasing from Agilent's RF and microwave instruments probe power port or bench top...

Read More »
Differential Probes suit floating signal measurement.
Electrical / Electronic Probes

Differential Probes suit floating signal measurement.

Operating at 25 MHz and 100 MHz, high-voltage models N2790A and N2791A allow earth-grounded oscilloscopes to be used for floating signal measurements of up to 1,400 V of differential voltage and 1,000 V of common-mode voltage. Probes offer user-selectable attenuation settings and come with various probe tip accessories for use with small and large components in tight places. Each probe can...

Read More »
Fused Test Probes allow indication of live voltage.
Electrical / Electronic Probes

Fused Test Probes allow indication of live voltage.

Providing indication of live voltage even with blown fuse, FTP Fused Test Probes feature built-in fuses and sheathed tips for additional safety. They feature 2 mm threaded probe tips with removable 4 mm lantern-style spring contacts and removable GS38 insulated IC caps for probing closely spaced leads. Rated to CAT III 1000 V, CAT IV 600 V and 10 A, modular probes feature operating temperature of...

Read More »
Electrical / Electronic Probes

Pho-Tronics Adds MicroCraft EMMA ELX 6146 Flying Probe Tester, Increases QTA Capacity

07/20/09 Pho-Tronics Adds MicroCraft EMMA ELX 6146 Flying Probe Tester, Increases QTA Capacity MILWAUKEE, WI. - July 20 - Pho-Tronics Inc., a Milwaukee based Printed Circuit Board Manufacturer has purchased and installed a new MicroCraft EMMA ELX 6146 Flying Probe Tester. This top of the line Flying Probe Test machine will significantly increase Pho-Tronics in house testing capacity and will...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers