Electrical / Electronic Probes

Electrical / Electronic Probes

Agilent Technologies Introduces Tektronix-to-Agilent Probe Adapter, Expands Oscilloscope Value

Engineers Save Money Using Adapter with Probes They Already Own SANTA CLARA, Calif. - Agilent Technologies Inc. (NYSE: A) today introduced a Tektronix-to-Agilent probe adapter. The N2744A T2A adapter enables engineers to connect Tektronix TekProbe-BNC Level 2 probes to Agilent's Infiniium and InfiniiVision oscilloscopes. Based on customer feedback, Agilent provided a solution to meet customer...

Read More »
Electrical / Electronic Probes

High Frequency Oscilloscope Compatible Probes measure AC current.

Models MF 300-6-2-10 HF and MF 300-10-2-10 HF High Frequency MiniFlex® Probes feature flexible sensor available in lengths of 6 and 10 in. as well as electronic module. Measuring AC current from 5 Hz to 1 MHz, lightweight units use transformation principle based on air core, and present no load to system under test. Devices are insensitive to DC currents and have mV output proportional to...

Read More »
Nitride Lever Probes enable high-resolution AFM imaging.
Electrical / Electronic Probes

Nitride Lever Probes enable high-resolution AFM imaging.

Able to be used on any atomic force microscope (AFM), Sharp Nitride Lever (SNL) Probes feature tip that combines low spring constant softness of silicon nitride cantilever with sharpness of silicon tip. This results in radius of curvature as low as 2 nm. High resolution imaging in air and fluid is possible using Contact Mode and TappingMode(TM) operation, and there are 2 available configurations:...

Read More »
Oscilloscope Probing System features 30 GHz bandwidth.
Electrical / Electronic Probes

Oscilloscope Probing System features 30 GHz bandwidth.

Offering real-time measurements, InfiniiMax III Probing System is available with 4 probe amplifier models with bandwidths from 16-30 GHz. Range of probe heads allows connection using browser, zero insertion force tip, 2.92 or 3.5 mm SMA cable, or solder-in tips. InfiniiMax III browser uses crisscross blade grounding system for low inductance grounding, poly-iron wrap of coax tips to minimize...

Read More »
Aerial Flying Probers include thermal scan.
Electrical / Electronic Probes

Aerial Flying Probers include thermal scan.

Based on VIVA Integrated Platform core hardware and software, AERIAL Flying Probers include 2 Flying IC Thermal Detection Units positioned on each side of unit under test to detect thermal parameters of ICs under power. Purpose is to compare temperatures of known good boards to suspect boards and indict bad components in depot repair environment. Models range from 2-8 test probes, accessing...

Read More »
Electrical / Electronic Probes

Differential Solder-in Probe characterizes serial data signals.

Supporting WaveMaster 8 Zi oscilloscopes, 25 GHz WaveLink D2505 provides 17.5 ps rise time performance. Baseline electrical noise is 3.1 mVrms at 25 GHz and 1.6 mVrms at 13 GHz. In addition, probe exhibits optimized AC loading in mid-band and high frequency range with 350 W at 7 GHz, 575 W at 13 GHz, 325 W at 16 GHz, 160 W at 20 GHz, and 120 W at 25 GHz. Damping resistors on solder-in tip are...

Read More »
Electrical / Electronic Probes

Mini Card Interposer speeds Gen2 PCI Express® analysis.

Accommodating 2 types of setups, Mini Card Interposer serves as dedicated probe that makes it possible to analyze data traffic from Mini Card that uses PCIe interface to connect to laptop/notebook/tablet system. It supports probing at speeds up to 5 GT/s (Gen2) and, in addition to being able to probe PCIe interface, also provides connectivity to LeCroy's USB analyzers for USB 2.0 protocol...

Read More »
Electrical / Electronic Probes

Mezzanine Card Interposer facilitates PCIe 2.0 analysis.

Designed for Summit(TM) PCI Express Protocol Analyzers, XMC Mezzanine Card Interposer provides dedicated probe that enables users to analyze data traffic from XMC module that uses PCI Express interface to connect to carrier board system. Card supports PCI Express data channels with lane widths up to x8 at data rates up to 5 GT/s. With protocol analyzers, users can identify, diagnose, and solve...

Read More »
Electrical / Electronic Probes

Circuit Test Probe monitors embedded USB 2.0 and inter-chip links.

USB probe monitors embedded USB 2.0 and interchip links within multichip PCB assembly. Operating with entire line of LeCroy USB analyzers, probe supports tapping chip-to-chip links using low or full speed inter-chip signaling at all defined IC-USB voltages. Flying lead tap can be connected directly to inter-chip probe points using solder-in resistor connections. Probe can also be used to tap USB...

Read More »

All Topics

COVID-19 Response Suppliers COVID-19 Response:
Can Your Company Help Provide Critical Supplies?

We are using the power of our platform to aid in the mass shortage of critical supplies. If your company can help provide supplies, capabilities, or materials for products such as N-95 Masks and Tyvek SuitsPlease let us know.

COVID-19 Response Suppliers