Electrical Disconnects

DC Low Voltage Disconnects suit hybrids, fleets, and OEM's.
Electrical Disconnects

DC Low Voltage Disconnects suit hybrids, fleets, and OEM's.

Capable of direct currents up to 500 A, POWER-GATE low voltage disconnects require no heat sinking or airflow. Programmable, autonomous solid state relays are designed as central point of connect or disconnect for DC accessories such as inverters, radios, and motors. With high voltage trip, low voltage trip, timing features, logic feedback, and external monitoring, devices are customizable for...

Read More »
Electrical Disconnects

Ferraz Shawmut to Display Innovative Solar Power Circuit Protection Products at Solar Power International 2009, Booth 2832

NEWBURYPORT, Mass. (October 5, 2009) - Ferraz Shawmut, a global leader in the field of electrical protection, will unveil innovative circuit protection products for the commercial solar power industry at the Solar Power International 2009 conference, booth 2832, from Oct. 27-29 at the Anaheim Convention Center. The conversion of solar energy to electricity is a reliable process, as long as it's...

Read More »
Disconnect Switch has rating of 100 A at 12 V or 24 Vdc.
Electrical Disconnects

Disconnect Switch has rating of 100 A at 12 V or 24 Vdc.

SureStart(TM) Low Voltage Disconnect Switch 48513 electronically senses battery voltage and conserves starting power by disconnecting non-critical loads, prolonging battery life in vehicles. It offers service life of over 1,000,000 on/off cycles, features manual override, and is resistant to moisture, salt spray, vibration, and shock. Measuring only 4.5 x 4 x 4.27 in., switch can be used in...

Read More »
Electrical Terminals comply with RoHS lead-free directive.
Electrical Disconnects

Electrical Terminals comply with RoHS lead-free directive.

Supplied in strip form or as loose pieces, ETCO Terminals include over 1,500 standard connector products that are designed to be crimped to wire, such as rings, spades, disconnects, pins, receptacles, and splices made from RoHS-compliant materials. Units range in size from 0.008-0.090 in. thick with tolerances to ±0.002 in. Applications include household appliances, IT and...

Read More »
Luminaire Disconnects comply with 2008 NEC 410.130 G.
Electrical Disconnects

Luminaire Disconnects comply with 2008 NEC 410.130 G.

PowerPlug push-in disconnect lets electricians safely disconnect hot and neutral ballast wiring prior to fixture servicing, preventing contact with live voltage. Halves of disconnect are snapped together to re-power fixture. Designed for switching and dimming, 3-wire model is rated to 3 A/120 V and fits through ½ in. knockout. Also available, 2- and 3-wire PowerPlugs are designed for use with...

Read More »
Electrical Disconnect ensures safe luminaire service.
Electrical Disconnects

Electrical Disconnect ensures safe luminaire service.

Suited for linear fluorescent fixtures that use dimming circuit or DALI protocol, 3-pole LUMI-NUTS(TM) Model 873-903 meets NEC410.74 (G), CEC30-308 (4), and CSA/UL Standard 2459 for Insulated Multi-Pole Splicing Wire Connectors. Device features 6 A/600 V rating and utilizes UL94V-0 flame-rated polyamide 6.6 housing for flame retardation. Touch-proof design eliminates need to disconnect power for...

Read More »
Safety Disconnect Switch features 30 A, 600 Vac rating.
Electrical Disconnects

Safety Disconnect Switch features 30 A, 600 Vac rating.

Housed in watertight enclosure, non-fused PowerSwitch(TM) DS30AX includes 4 mounting feet, 7 conduit entry points, integral ground plate, and 10 A normally open auxiliary contact for remote monitoring. Enclosure measures 4.5 in. deep x 5.28 in. wide with bottom-hinged cover and front-operated, pistol-grip handle that meets OSHA safety regulations. Designed for harsh, washdown environments,...

Read More »
Master Disconnect Switch targets heavy electrical motors.
Electrical Disconnects

Master Disconnect Switch targets heavy electrical motors.

Suited for variety of vehicle applications, High-Amp DP Master Disconnect Switch handles 125 A on each pole at up to 36 Vdc and can be used in 2 ways. Since it can control 2 independent circuits, switch is suited for large motors. Device can also switch one load, but disconnects 2 parts of same circuit, totally shutting down load circuitry and giving user completely safe disconnect.

Read More »
Motor Disconnect Switch keeps processes moving safely.
Electrical Disconnects

Motor Disconnect Switch keeps processes moving safely.

Offered in 20, 30, 60, and 100 A units, Square D® MD50 pin-and-sleeve interlocked switch receptacle prevents process interruption by cutting power to motor if necessary while not affecting main circuit. UL 508-listed product employs IEC 60309-compliant technology that helps increase safety on plant floor by preventing mating of plug and power receptacle with different voltage and ampere...

Read More »
Enclosed Safety Disconnect Switch has locking receptacle.
Electrical Disconnects

Enclosed Safety Disconnect Switch has locking receptacle.

PowerSwitch(TM) Enclosed Disconnect Switch with Receptacle (EDSR-23) is suited for powering portable cord connected equipment, such as pumps and bottling stations, that must be moved from location to location. At 6 Â-¼ in. wide, it fits between I-beam flanges and accepts standard 20 or 30 A NEMA locking flush receptacles rated up to 600 V. One 10 A NO auxiliary contact is factory-installed...

Read More »
Basalt America Announces Stronger, Lighter, and Corrosion-Free FRP's (Fiber Reinforced Polymers)
Sponsored

Basalt America Announces Stronger, Lighter, and Corrosion-Free FRP's (Fiber Reinforced Polymers)

Fiber Reinforced Polymers (FRP), represents a truly groundbreaking advancement in structural reinforcement. Lightweight, strong, and green, they are changing the way the construction industry thinks about rebar. Unlike steel, FRPs don't rust and are far stronger than standard rebar. To learn why Fiber Reinforced Polymers are poised to change the way the world builds, see our video.

Read More »

All Topics