Electrical Contactors

Electronic Components & Devices

High Voltage Contactor suits solar applications to 1,000 Vdc.

Developed for use in solar combiner boxes and inverters, Model HX22 is UL rated for switching 175 A at 1,000 Vdc and continuous duty up to 300 A. RoHS-compliant unit utilizes EPIC® sealed switching technology, exceeding IP67 and IP69 sealing requirements, and making it safe for use in nearly any harsh environment including under water and at temperatures from -55 to +85°C. Measuring 3.6 x 3.2...

Read More »
Controls & Controllers

Additional IEC Motor Controls Available from AutomationDirect

AutomationDirect's GH15 series of electric contactors now includes larger frame sizes. The new components are available in frames sizes of 79 mm to 145 mm and models are available up to 315 Amps. GH15 series IEC motor controls feature self-lifting pressure plate terminals for quick wiring terminations; actuator coils, in 110/220 V and 220/240 V, 60Hz models, accommodate most applications. Now...

Read More »
Electrical Equipment & Systems

Gigavac Power Products Now CE Compliant

Santa Barbara, California – GIGAVAC, manufacturer of ADVANCED SWITCHING SOLUTIONS, announces that their line of Power Products, including contactors and battery disconnect switches, are now CE approved. The approval includes standard GIGAVAC EPIC® sealed contactors both GX, industrial, and MX, hi-reliability series. Other GIGAVAC products covered under the CE mark are the BD and HBD manual...

Read More »
Injection Molding from 3D Printed Molds
Sponsored

Injection Molding from 3D Printed Molds

3D printing has become one of the biggest trending technological innovations of the 21st century. With its logistical efficiency, ability to easily modify designs, and speed of production, it’s no surprise that the manufacturing industry is turning to 3D printing for a multitude of applications. This white paper explores how 3D printing can be beneficial specifically for manufacturers focused on low volume injection molding of small plastic parts. The report features a succinct yet detailed overview of two case studies, both of which exhibit the advantages and possible challenges of making molds via 3D printing. The article goes on to offer advice on how such challenges can be overcome, as well as some guidelines for mold design. If you’re looking to break the mold to save time and money, download this white paper and see if 3D printing is the right solution for your business.

Read More »

Multitest ecoAmp(TM): Kelvin Contactor for High-Power Applications Proves Performance
Electronic Components & Devices

Multitest ecoAmp(TM): Kelvin Contactor for High-Power Applications Proves Performance

Rosenheim – Multitest, a designer and manufacturer of final test handlers, contactors and load boards used by integrated device manufacturers (IDMs) and final test subcontractors worldwide, announces that its ecoAmp™ high-power Kelvin contactor successfully passed a challenging evaluation for an automotive application at an European-based IDM. The patent pending ecoAmp™ is a...

Read More »
Solid State Relays and Contactors offer ratings up to 600 Vac.
Controls & Controllers

Solid State Relays and Contactors offer ratings up to 600 Vac.

Available in 2 frame sizes of 54 or 70 mm wide, RGC2 and RGC3 Series provide solutions for 2- and 3-pole switching of 3-phase loads. RGC2 offers 3 current ratings of 25, 40, and 75 AAC per pole at 40°C, while RGC3 offers 5 current ratings ranging from 20–65 A per pole. With optional monitoring feature, devices can detect status of mains and load, as well as internal RGC failures. Alarming is...

Read More »
Electronic Components & Devices

Multitest to Exhibit Integrated Test Solutions at BiTS 2013

Rosenheim, Germany - Multitest, a designer and manufacturer of final test handlers, contactors and load boards used by integrated device manufacturers (IDMs) and final test subcontractors worldwide, will exhibit in Booth #K4 at the Burn-in & Test Strategies Workshop (BiTS), scheduled to take place March 3-6, 2013 in Mesa, AZ. Multitest combines long-term experience in semiconductor test with the...

Read More »
Electronic Components & Devices

Power Contactor has hermetically sealed design.

Weighing less than 4 oz, hermetically sealed P105 MiniTactor™ can be installed in any orientation on panel within seconds. Sealed chamber for both contacts and coil ensures clean switching in any environment, and safe make and break power switching can be achieved at any voltage up to 1,500 Vdc. With bi-directional switching capability and current carry rating to 50 A, product accommodates...

Read More »

Noark Enters North American Market at AHR 2013, Booth 5700
Chemicals & Gases

Noark Enters North American Market at AHR 2013, Booth 5700

A name you may not yet know, but NOARK Electric provides reliable products and efficient solutions to intelligent power and energy systems worldwide. This global supplier of electrical components and intelligent control systems will be presenting an assortment of UL 489 Listed circuit breakers, relays and contactors at the upcoming AHR Expo in Dallas. This show represents the company's first...

Read More »

MEMS Oscillators - Great Growth Potential and Superior Performance Multitest Equipment Fully Supports the Advantages
Electronic Components & Devices

MEMS Oscillators - Great Growth Potential and Superior Performance Multitest Equipment Fully Supports the Advantages

Rosenheim, Germany: Multitest, a designer and manufacturer of final test handlers, contactors and load boards used by integrated device manufacturers (IDMs) and final test subcontractors worldwide, announces that its equipment fully supports the advantages of MEMS Oscillators. MEMS oscillators are considered to be a favorable alternative to the long-established, quartz crystal oscillator...

Read More »
Sponsored

Performance Packagings AIRSHIELD Achieves FDA Approval for Food & Beverage Applications

As a globally recognized provider of full-service packaging products and services, we have a history of developing innovative solutions that promote enhanced efficiency in a wide range of packing applications. Our new AIRSHIELD product is just another example of how we are helping food and beverage manufacturers to extend the life of their products. To learn more about this cutting-edge product, see our video.

Read More »

All Topics