New Ex9CA Contactor is Designed for Use in Safety Function Applications
Equipped with permanent transparent cover that prevents manual operation and provides easy identification of the device status. Available with either AC or DC operating coils with DC coil models equipped with integrated surge suppression. Offers unique features that allow the design of safety control circuits with current ratings up to 38A.
Read More »
New CombiTac Direqt Modular Connector System is Shock and Vibration Resistant
Available in Medium and high-current contacts up to 350 A. Comes with IP2X protection both on male and female side, along with leakage-free pneumatic couplings (15 bar). Offers constant and reliable connection for signal, power, and pneumatic coupling up to 10,000 mating cycles.
Read More »
New Ex9C F-Type IEC Contactors are IEC/EN 60947-1 and UL 60947-4-1 Certified
Available in three frame sizes with rated current up to 100 A. Feature electronic coil with control voltage of 24~60 VAC/DC, 48~130 VAC/DC and 100~250 VAC/DC. Offer integral surge protection and less energy to operate the coil that translates to lower operational costs.
Read More »
New Semiconductor Test Contactors Equipped with Spring Probe Pins Starting from 0.3mm Pitch
Starts with the standard hinged-type socket for evaluation and reliability applications like HAST, HTOL and Burn-in. Operation temperature range is from -40°C to +150°C. Used for the packages LGA, QFN and BGA/(WL)CSP´s from sizes of 3x3 to 11x11mm.
Read More »
Distillation 101: A Guide to Distillation and Separation Technologies
Distillation is a separation unit operation that involves multiple countercurrent-stage steps, separating two or more volatile components. This results in the contact of liquid and vapor most generally in counterflow. Distillation 101: A Guide to Distillation and Separation Technologies provides an in-depth look at everything you need to know about distillation, including: Design procedures Equipment components Applications
Read More »
NOARK Presents Extended Frame Size for The EX9C1000A at ATX Canada 2019
Frame size offered in a 630, 800 and 1000A. IEC style of AC and DC contactors are UL508 certified and tested for NEMA market.
Read More »
New RG..M Series of 1-Phase Solid State Relays and Contactors Equipped with an Alarm LED for Visual Indication of Fault Presence
Consists of solid state switches that integrate monitoring features for quick and timely failure detection. Controlled with a 4 to 32VDC input signal and must be supplied with 24 VDC. Applications include plastics machinery, packaging, semiconductor wood-processing and drying equipment.
Read More »
New ICON Coaxial Contactor with Insertion Loss Greater than 52 GHz At 1 dB without Distorting The Test Signal
Maximizes high-frequency power transfer by minimizing signal reflections. Carries test signals that are impedance matched to the DUT and the test system at 50 Ohms. An impedance mismatch can be overcome by matching the device-under-test to the contactor and to the test system.
Read More »
New Intelligent cDragon Contactor Comes with Motion Decoupling Tabs
The Intelligent cDragon Contactor is suitable for contacting analog and RF technology in DFN, QFN, QFP and SO packages. The pin design of the contactor offers precise pointing accuracy and improved repeatable test results. The product is offered with force-controlled wipe that prevents objectionable impact on DUT pads and pins. It features a self-cleaning reverse wipe action that extends cleaning...
Read More »
New RGC Series Solid State Contactor is Equipped with an Integral Heat Sink
The RGC-32 RGC Series Solid State Contactor is used for switching up to 37 AAC at 40°C and is fitted in the 17.8 mm wide platform and 103 mm depth. The product is available with screw and box clamp output terminals. The contactor provides current rating of up to 37 AAC at 40°C or 43 AAC at 25°C and has an output voltage rating of up to 660 VAC. The device features a higher rated power chip...
Read More »
New HVC Series High-Voltage Contactors Can Switch Voltages up to 900 V
TDK’s HVC Series High-Voltage Contactors now include HVC300 and HVC500 types with current capabilities of 300 A and 500 A respectively. Units come with gas-filled switching chamber that allows safe and quick extinguishing when the current is switched off. These contactors are suitable for DC traction systems, photovoltaic, energy storage systems, and uninterruptable power supplies. Units are...
Read More »
Ensure Your Medical Device Meets Regulatory Standards with Triad's Custom Magnetics
Triad Magnetics' custom components for medical devices are designed and manufactured with the strictest regulatory standards in mind. Our capabilities include rapid design, prototyping, and testing of inductors, transformers, and power supplies for medical equipment. Check out our video to learn more.
Read More »
