Connectivity System provides Category 5e technology.
Clarity5E(TM) offers center-tuned connector unions for transparency within cabling system. All components have synchronized design for heightened installed performance. Clarity5E components include TracJack(TM) Modules, Series II Modules, Patch Cords with Paralign(TM) 2 plug technology, and modular Patch Panels.
Read More »Correct-A-Chip Adapter operates up to 210-
Series 350000-HT lead-free Correct-A-Chip adapter enables users to upgrade from DIP devices to SOJ or SOIC devices with no PCB rework or redesign. It is offered on .300, .400, and .600 in. centers with 14, 16, 18, 20, or 24 pins. PCB is .062 in. Polyimid, rated at 260Ã-
Read More »
Ejector Headers mate with .050 , .100 , and 2 mm cable systems.
EHF Series double row surface mount ejector headers on .050 in. pitch are available in 7 pin counts from 10 through 50 pins. Mated height is .445 in. above board. EJH Series surface mount and through-hole ejector headers on .100 in. pitch come in 6 double-row pin counts from 10 through 50 pins, with mated height of .665 in. EHT Series surface mount, through-hole and right-angle ejector headers...
Read More »
Connectors resolve space, mating, and assembly problems.
Custom engineered connectors provide interconnectivity solutions for power and signal applications. Brackets, terminal blocks, male/female contact assemblies, machined metal base housings, DIN rails, shunts, and protective covers can be custom built to meet specific capacity and environmental requirements. They can also conform to IEC and military specifications and be UL listed.
Read More »
Metal Stamping for Construction Tool Applications
Metal stamping is a highly versatile manufacturing technique, capable of producing quality components at tight tolerances.
Read More »
Locking Connectors feature push/pull operation.
Quick Disconnect Precision Locking Connectors are offered in two series: one conforms to Ingress Protection Rating Standards with specification rating of IP50, and other category conforms to IP68 watertight rating. There are 3 sizes in each group with pole count availability ranging from 2-27. Connectors are non-magnetic, non-conductive, and autoclavable with optional inserts. Each connector is...
Read More »
Connector provides Z-axis, board-to-board solution.
SliderZ(TM) features .050 in. pitch and slide mating action, allowing user to mate or remove one pcb in Z-axis while leaving other pcb undisturbed. Featuring glass-filled polyester housing, connector is UL 94V-0 approved with operating temperature of -40 to 85Ã-
Read More »
Tiny Connectors stack small form factor boards
Micro pitch pin and socket connectors work in micro/miniature applications. Square terminals mate with dual beam Tiger Claw or single beam Tiger Beam contacts. The 0.0315 in. system includes FTE Series headers and AW Series stackers which provide board spacings from 0.0197 to 0.355 in. when mated with CLE Series sockets. The 0.0394 pitch system has FTM Series headers and MW Series stackers with...
Read More »
DC Electrical Receptacles install quickly.
Weather-resistant plugs and receptacles for vehicles have Slide-Lok(TM) locking ring for easy installation. Installer slides keyed ring past most of receptacle threads, until ring is flush against panel. Quarter turn engages ring onto threads. Models include: 12VRCTT Thin Terminal receptacle with 2 different-sized NEMA connection tabs to prevent misconnection; 2VPG2A 12 V plug fused at 2 A; and...
Read More »
SMB Connectors provide low mating and un-mating force.
SMB Series 75-Ohm Connectors include plugs, right-angle plugs, and PCB jacks for frequencies up to 4 GHz. RSB-301-179, positive-locking plug uses spring-loaded collar that must be retracted before connector will un-mate. RSB-300-1-179 straight and RSB-310-1-179 right angle crimp plugs feature standard snap-on coupling with gold plated contacts and body. RSB-350-1, vertical, and RSB-355-1, right...
Read More »
TNC Connectors meet FCC Part 15.
Crimp connectors satisfy requirements of FCC part 15 by reversing contacts within standard connector body. RP-1216-I connector has TNC male pin and interface dielectric in TNC female body, and RP-1202-I has TNC female contact and dielectric in TNC male body. Both RP-1216-I and the RP-1202-I crimp connectors are for use with 2TV-400, LMR-400-UF, WBC-400 and Belden 9913 coaxial cables. They are...
Read More »
Sentry Equipment Introduces New Compact Hygienic Automatic Sampler
As a leader in industrial sampling equipment at Sentry Equipment, our success is built on a history of innovation and designs that epitomize value and efficiency. The new Hygienic Automatic Sampler is another example of our dedication to developing quality engineered products. To learn how this product can streamline the sampling process for dry, free-flowing materials, see our new video.
Read More »
