Solenoid Valve Connectors have integrated gasket design.
Able to turn alternating current into direct current, 5FR and 5JR series incorporate full-wave bridge rectifiers inside fully molded connectors. Both reduce coil burnout due to valve sticking and eliminate hum of alternating current. Rated to IP67/NEMA 6, products are made from flexible polyurethane and come in low-profile, straight-line (5FR) or 90Ã-
Read More »Banana Jacks promote panel construction efficiency.
Designed for accelerated panel construction and optimal conductivity, IEC 1010, 4 mm Banana Jacks for Sheathed Plugs are available with threaded studs, solder tabs, and threaded studs with hexagonal nuts. Jacks feature gold-plated nickel pins (nickel-plated brass for Part No. 72930) to promote connectivity and polyamide bodies for durability. Packaged in quantities of 10 per color, 1.34 in. long...
Read More »
PLCC to DIP Adapters feature RoHS compliance.
Featuring 1-20 pin PLCC clock chip on top and 1-16 pin DIP clock chip on bottom, Correct-A-Chip(TM) Adapter converts PLCC-packaged type clock chip to DIP footprint without changing PCB layout. Body of adapter is .062 in. thick, glass-filled IS-410 material with 1 oz of copper traces on both sides. Male pins are brass alloy 360 with 10 Ã-µin. min gold plating per MIL-G-45204 over 100...
Read More »
Shrouded Pin Headers promote reliable SMT connections.
Suited for cable-to-board applications, QuickieÃ-® Shrouded Pin Headers are designed for lead-free pin-in-paste (PiP) soldering, which allows through-mount connectors to be attached using SMT soldering processes. Header body employs high-temperature thermoplastic, and housing design is adapted to optimize flow of solder paste. Headers feature 4-wall shroud and mate with Quickie IDC...
Read More »
EMI/RFI Shielding Considerations for Electric Vehicles
This white paper provides an overview into EMI/RFI shielding considerations for electric vehicles.
Read More »
DIN Connector meets industrial application requirements.
Inter-mateable with Binder 425 and 723 series, 423 series suits demanding applications requiring small, circular DIN connector. It features M16 threaded coupling system designed in accordance with IEC 130-9 and is sealed to IP67. Shielding rings facilitate termination and internal strain relief can grip cable diameters from 4-8 mm. Industrial connector supports 2-24 contacts and is available in...
Read More »
Power Connectors provide high current carrying capacity.
Providing current-carrying capacity of up to 20 A per contact and voltage rating of 150 V, AirMax VSÃ-® power connectors feature flat contacts and enable use of high conductivity base metal. Available as right-angle header and vertical receptacle, compact 2x2 and 2x3 connectors match 11.5 mm above-board height of VS 3-pair signal connectors. Open passages allow air flow over contact's...
Read More »Connector Modules target 10 Gigabit Ethernet applications.
Suited for use with 10 Gb hot-pluggable optical transceivers, XFP001/2/3-L Series supplies EMI protection. Cage and connector comply with MSA 3.0 standard and support OC192/STM-64, 10 Gb Fibre Channel, G.709, and 10 Gb Ethernet protocols. Standard 1 x 1 cage measures 21.7 x 65.3 x 13.2 mm and comes with clip and heat sink. Cage is made of nickel-plated copper alloy to prevent oxidation....
Read More »Waterproof Connectors provide latching stain relief.
Offered in 4 sizes, DryConn DBSR Black Series of direct bury twist-on wire connectors features easy latch lid to reduce stress on wires. Pre-filled with petroleum grease, series waterproofs and safeguards each splice from corrosion caused by harsh weather and underground elements. Suitable for direct bury and low voltage wire splices less than 50 V, DBSR series has wire range combinations between...
Read More »Parallel Interconnects provide high-density solution.
Enabling 20 Gbps transmission speeds, Model QTR-3600 optical modules support 4 independent lanes of Ethernet or Fibre Channel data streams or 4x SDR and DDR InfiniBand(TM) at distances up to 300 m on multimode optical fiber. Model QTR-3700 copper modules support data rates of 5 Gbps per lane at distances of several meters depending on electrical cable type. Both devices have QSFP form factor and...
Read More »
Interconnect System saves space in servomotor applications.
Designed to replace 2 traditional circular connectors, low-profile CmX Series enables installation in 4 steps and includes clamp technology to minimize space required for cable strain relief, shielding, and sealing components. Products, available in 3 size ranges, cover power range from under 5 A to over 40 A. All fully shielded connectors are sealed to IP67 and resistant to vibration and shock....
Read More »
Ensure Safety, Reliability in Your Cement Plant with Aerzen Blowers and Compressors
Aerzen offers blowers and compressors for challenging cement applications such as pneumatic conveying from raw mill to raw meal silos, combustion air, cement silos fluidization, and more. At Aerzen, safety is our top priority. Check out our video to learn more.
Read More »
