Steel Fixture Whips target various electrical applications.
Pre-assembled flexible metal whips are suited for lighting fixture installation as well as many other electrical equipment uses. They consist of 6 ft of UL-listed flexible metal conduit, stranded THHN wire with 6 in. leads, and internal, zinc die-cast fittings with steel locknuts. Standard sizes include 12, 14, and 18 ga wire and multiple color configurations. Products are also available in...
Read More »Connector/Splice Enlcosures offer security and durability.
LANscapeÃ-® Industrial Connector Housing (ICH) series accommodates conduit with concentric knockouts or rubber grommets. Units have padlock-capable outer door as well as separate inner door that protects provider side of unit from unauthorized access. Likewise-lockable Industrial Splice Housing (ISH) series is wall-mountable for transition splicing between cable at building entrance or...
Read More »Wire Duct is offered in slotted blue/black and solid types.
Offered in 2 m lengths with nonslip flush cover, T1 series slotted wire duct is available in blue for wiring to intrinsically safe components in control panels, and in black for network cabling systems, fiber cable racks, patch panels, and telecommunication closets. Solid-wall, non-slotted wire duct, in sizes from Ã-½ x 2/3 inch to 4 x 4 in., in 2 m lengths, is also available. All duct is...
Read More »MPHusky Cable Bus Achieves Superior Reliability to Bus Duct, Conduit & Wire and Other Power Distribution Systems
MPHusky engineers and manufactures Cable Bus Duct Systems that utilize continuous runs of cable from termination to termination, eliminating the need for potentially faulty splices found in non-segregated phase bus duct systems. Since MPHusky Cable Bus utilizes highly reliable outdoor rated cables, moisture and weather do not damage the system. In fact, the system is designed to allow air,...
Read More »Whitepaper: 7 Trends for IoT in Hospitality
Check out this white paper to see how the IoT can be used in your hotel to reduce energy consumption, increase guest satisfaction, improve maintenance, and more.
Read More »Conduit Bodies come with epoxy-free, uncoated finish.
Available in 7 configurations ranging from Ã-½-4 in. trade sizes, Model FM9(TM) conduit bodies are forged from copper-free aluminum for lightweight mounting and corrosion resistance. Suited for Class I, Division 2 applications, products feature wiring cavity along with domed cover, and use stainless steel pan-head cover screws. They help electricians tackle wide range of jobs encountered when...
Read More »Square D-® Square-Duct Galvanized Steel Wireway
COMBINES CORROSION RESISTANCE WITH INCREASED ASSEMBLY EASE PALATINE, Ill. - December 20, 2005 - Square D-® SQUARE-Duct-® NEMA Type 1 galvanized steel wireway combines corrosion resistance with greater assembly ease. Because wireway sections and fittings are completely open on one side, no pulling through of wires and cables is required; they can be simply laid into the wireway without fear of...
Read More »Wire Duct includes non-slip flush cover.
Available in sizes from 1.00 x 1.50 in. to 4.00 x 4.00 in., thin-finger Series T1E is made of rigid PVC and carries UL 94V0 flammability rating. Rounded, burr-free edges will not cut installer's hands or wire insulation, and restricted slot design retains wires, facilitating installation or removal. Duct is scored with 2 break lines, 1 for break-off and removal of sidewall finger segments, and...
Read More »Wiring Duct controls cables in point-to-point wiring.
With 2-point contact design, Ty-Duct(TM) Wiring Duct is UL recognized for continuous use at temperatures ranging from -40 to 140Ã-
Read More »Type B Conduit is offered in 500 and 1,000 ft reels.
Non-metallic PVC XtraflexÃ-® Type B Conduit is sunlight and oil resistant. It is available 3/8 in. gray packaged in 500 ft reels; 1/2 in. gray or black packaged in 500 and 1,000 ft reels; and 1 in. gray or black packaged in 500 ft reels. With smooth surface ID that facilitates wire pulling and rating of NEMA 6P submersible when used with BulletÃ-® Liquidtight fittings, Xtraflex is suited...
Read More »Non-Slip Cover protects wiring ducts.
Non-Slip CanlockÃ-® System withstands vibration in applications such as elevator, railroad, motor control centers, HVAC, and land-based drill rigs. Unit eliminates rework due to covers that slip when equipment moves from one site to another.
Read More »ISO-Certified J&D Tube Benders Delivers Rapid Tubeline Fabrication Services
J&D Tube Benders' laser cutting and machining services provide accurate and complex features on tubes of all shapes and sizes. Check out the video to learn more!
Read More »