New OSFP Connectors and Cable Assemblies Provide Support to 8x28G NRZ and 8x56G PAM-4 Protocols
The Octal Small Form Factor Pluggable Connectors and Cable Assemblies are suitable for use in data centers with needs up to 200 Gbps and 400 Gbps. The units can fit up to 36 400G ports into a 1RU switch form factor. These OSFP’s consist of surface mount connectors, 1x1 and 1x4 cages, and straight and breakout passive copper cable assemblies in multiple configurations.
Read More »
Latest Cat5e AWM 600V Ethernet Cable is Designed with Foil and Braid Shielding
LUTZE’s 2-Pair Cat5e AWM 600V Ethernet Cable is suitable for applications where high reliability is required. The unit features M12 and RJ45 connectors that are used for making field wiring easy. The cable’s foil and shielding protects data from harmful interference for an uninterrupted data transmission.
Read More »
New 124 Sliver Connectors and Cable Assemblies Enable Up to x20 Signal Transmission Lanes
The Sliver Connectors and Cable Assemblies from TE Connectivity with guide rails enable blind mating and can disengage the cable when the space is limited. The position connectors support PCIe Gen 4 and Gen 5, Ethernet 56G and SAS-5 whereas the cable assemblies support PCIe Gen 4 and can be upgraded to PCIe Gen 5, Ethernet 56G and SAS-5. The units allow system designers to streamline designs by...
Read More »
Latest OM5 Multimode Fiber Patch Cable Supports at Least Four Wavelengths in the 850-950 nm Range
The Tripp Lite’s OM5 50/125 Multimode Fiber Patch Cable is suitable for use with vertical-cavity surface-emitting lasers and short wavelength division multiplexing. The units are available in lengths ranging from 1 m to 25 m and are designed to IEEE 802.3ae and TIA LOMMF standards. They support for 40/100 Ethernet applications and are used for applications up to 300 m. The cable’s Low-smoke,...
Read More »
Deploying Commercial Electronics in Rugged Environments
This white paper explores how Commercial Off-the-Shelf components can be used efficiently and cost-effectively in critical military applications.
Read More »
New 8ES4 Twin Axial Cable Assemblies Come in Foldable Ribbon Construction
3M’s SFF-8ES4 Twin Axial Cable Assemblies are available in 0.5 m, 0.75 m, and 1 m lengths. The units are offered in thin ribbon cable construction that allows for dense routing and multiple routing options. They come with straight and right angle connectors and provide a 30 AWG signal wire size and are suitable for PCIe (85Ω) applications.
Read More »
Igus Chainflex CF30 Unshielded and CF31 Shielded Motor Supply Cables Now Provide a Service Life Between Five and 10 Million Cycles
Igus Chainflex® CF30 unshielded and CF31 shielded motor supply cables are designed with stranded conductors to withstand exposure to constant flexing, resulting in a service life between five and 10 million cycles. The conductors are constructed of bare copper with insulation made up of a black TPE mixture. The insulation is flame retardant and sunlight and oil resistant. The cables can be...
Read More »
TE Connectivity's Crown Clip Junior Power Cable Assemblies Upgraded with Space-Saving Side Exit for Increased Design Flexibility
The crown clip junior power cable assemblies from TE have been updated with a new side exit, saving space by reducing the need to bend cables during routing beyond the center of the server, switch, or storage enclosure. The extra space allows for greater design flexibility and the use of larger wire sizes as well as multiple wire gauge combinations, allowing for transition currents up to 200A....
Read More »
New PTFE Natural Coated Extrusion Wire Exhibits 0.05 Coefficient of Friction
The PTFE Natural® Coated Extrusion Wire is manufactured in 0.001 to 0.070 in. diameter sizes with final diameter tolerances of ±0.0001 to ±0.0005 in. The wire is designed for core wires, guidewires, stylets and mandrels. The product can be produced using stainless steel, nitinol, platinum and silver plated copper core wire and can be straightened and cut to length from 6 in. to 20 ft.
Read More »
Latest USB 3.0 Cables from L-com Feature Connector Over Molds
The USB 3.0 Cables are available in USB 3.0 Type-A male to Type-A male connectors and USB 3.0 Type-A male to Type-B male connector versions. The unit is offered with low-smoke zero-halogen jackets and ferrite beads that prevent interference from a connected device or to a connected device. The LSZH cable jackets minimize amount of toxic gas emission during combustion. They are suitable for use in...
Read More »
Latest MIN Size III Cordsets are Suitable for Use in Harsh Environments
Mencom’s MIN Size III Cordsets are now redesigned for use in rugged environments. The connector’s coupling nut with wide knurl area makes the installation process easy with improved gripping. The coupling is made from nickel plated brass that is resistant to salt, corrosion and weld slag. The units are available in multiple pole configurations including 9, 10, 12 and 19 pole and are made with...
Read More »
3Sixty Mission Critical Launches New Service Offering UPS as a Service As A Cost Effective Alternative to UPS Equipment Ownership
At 3Sixty Mission Critical, we specialize in maintaining the performance and uptime of our customer's mission-critical applications. Our services are comprehensive and designed to take on the entire burden of maintenance. Our "UPS as a service" is just another example of how we develop out of the box solutions to help our customers operate more efficiently; see our video to earn more.
Read More »
