New CT4098 Series BNC Cable Assemblies are Constructed with Bend-Relief Boots
CT4098 Series BNC Cable Assemblies are available in CT4098-25, CT4098-50 , CT4098-100 , CT4098-120 , CT4098-150 and CT4098-200 models with 25, 50, 100, 120, 150 and 200 cm lengths respectively. Units feature an insertion loss of 0.8 dB/m (1 GHz) and a VSWR of 1.20:1 (DC to 500 MHz) and 1.70:1 (500 MHz to 1 GHz). The cable assemblies are compliant to RoHS standards and provide frequency range of...
Read More »
New Skew Matched Cables Offer Delay Match of 1 ps and VSWR of 1.4:1
Pasternack’s Skew Matched Cables are designed for use in digital tests of 10 Gbps to 28 Gbps, differential signals, bit-error-rate testing and eye diagrams. Made of micro porous PTFE cable dielectric, units come with triple-shielded outer conductors, 2.92mm male connectors and finger-grip coupling nuts. Units offer DC to 40 GHz frequency range and cover two channels with 50 Ohms nominal...
Read More »
Latest High-Flex Ethernet Cable Assemblies Feature Tinned Copper Braided Shield
L-com’s High-Flex Ethernet Cable Assemblies are available in TRD855HFB, TRG515-P6D and TRG516-P6D families. Units are designed for continuous motion, factory automation, robotics and machine vision applications and are rated to 10 million flex-cycles. The cables are EIA568 color-coded and are protected against EMI/RFI interference. TRD855HFB assemblies come with RJ45 connectors and Category 5e...
Read More »
VFD Cable is Now Offered in Customer Specified Lengths
VFD Cable from AutomationDirect is designed to protect input and motor power wiring in variable frequency drives. Unit utilizes cross-linked Polyethylene conductor insulation and stranded tinned annealed copper conductors. The VFD cable is rated to 1000 V for use with 460 V drives and is offered with 4-conductors in 16 AWG to 2 AWG sizes. Unit is available in cut-to-length one-foot increments...
Read More »
The Next Wave of Intelligent Design Automation
In the amount of time it takes to set up a meeting to discuss just one design, engineers can now explore designs exponentially. Generative design has catalyzed a paradigm shift in product development. This shift not only drastically decreases the time it takes to design a product. It also opens the door to design options that might never have been imagined by engineers on their own.
Read More »
Heilind Electronics Now Stocking JAE DX07 Series USB Type-C Cable Assemblies
JAE Electronics’ DX07 Series cable assemblies are compatible with next-generation USB Type-C protocol for higher speeds and scalable performance WILMINGTON, MASS. (PRWEB) MAY 22, 2018 - Heilind Electronics, a leading global distributor of electronic components and authorized distributor for JAE Electronics, has expanded its extensive inventory of interconnect products with the...
Read More »
New Travel Size 3-in-1 USB Charging Cable Allows Charging of up to 3 Devices at a Time
Travel Size 3-in-1 USB Charging Cable comes with 6 in. length nylon braided cord, anodized aluminum connector and durable strain relief. Unit is offered with keychain ring to hand on keys, laptop bags and handbags. The cable supports the charging of three mobile devices at a time and allows fast charging. Unit can be used for charging both Apple and Android devices and also phones with USB Type C...
Read More »
New XTENDEX HDMI and DisplayPort Active Optical Cables are Compliant to HDCP 2.2 Standards
Network Technologies video extenders include XTENDEX® 4K and DisplayPort Active Optical Cables available in lengths of 10/15/20/25/30/50/70/100 m. These units are used for locating Ultra-HD 4Kx2K 60Hz 4:4:4 HDMI or DisplayPort display up to 100 m. HDMI 2.0b cables offer a bandwidth of 6 Gbps per channel whereas DisplayPort 1.2a cables provide 5.4 Gbps per channel. Units support 4Kx2K resolutions...
Read More »
AutomationDirect's New Cut-to-Length Cables Eliminate Wastage
AutomationDirect provides customer with Cut-to-length cables with one foot increments from 20 to 5000 ft. The cut-to-length cable types include portable cord, RS232/ RS422/ RS485 data cable, flexible control (tray) cable, instrumentation cable, continuous flexing control cable, and continuous flexing industrial Ethernet cable.
Read More »
MilesTek's New USB 3.0 Cable Assemblies are Manufactured to Requirements of USB3 Vision Standards
MUS3A-Series Cables are designed for military and avionics applications and come with molded connector consisting of two thumbscrews and a standard male USB 3.0 connector. Units feature 30 micro-inch gold-plated contacts with a throughput of 4.8 Gbps. MUS3A-Series units provide USB 3.0 Type A, B and Micro-B connector options.
Read More »
L-com's New Ethernet Cables Come with Waterproof Shroud
L-com’s New Ethernet Cables are available in Category 5e and Category 6 versions and are suitable for harsh networking applications. Units feature foil shield for protection against EMI/RFI interference, dustproof shroud cap and CMX outdoor burn rating. The Ethernet cables are compatible with WPBH-series of RJ45 jacks for an IP67-rated seal using its shroud.
Read More »
Vector® Sports Training Ball Offers Visible Point of Contact
Our goal is to help every athlete derive maximum enjoyment from their sport and become a better player. We offer a line of innovative training tools that combine cutting-edge technology and out of the box thinking to deliver an unbeatable competitive advantage. The Vector® Sports Training Ball is just another example of our commitment to innovation. To learn how the Vector® is helping ballplayers everywhere, see our video.
Read More »
