Latest OM5 Multimode Fiber Patch Cable Supports at Least Four Wavelengths in the 850-950 nm Range
The Tripp Lite’s OM5 50/125 Multimode Fiber Patch Cable is suitable for use with vertical-cavity surface-emitting lasers and short wavelength division multiplexing. The units are available in lengths ranging from 1 m to 25 m and are designed to IEEE 802.3ae and TIA LOMMF standards. They support for 40/100 Ethernet applications and are used for applications up to 300 m. The cable’s Low-smoke,...
Read More »
New 8ES4 Twin Axial Cable Assemblies Come in Foldable Ribbon Construction
3M’s SFF-8ES4 Twin Axial Cable Assemblies are available in 0.5 m, 0.75 m, and 1 m lengths. The units are offered in thin ribbon cable construction that allows for dense routing and multiple routing options. They come with straight and right angle connectors and provide a 30 AWG signal wire size and are suitable for PCIe (85Ω) applications.
Read More »
TE Connectivity's Crown Clip Junior Power Cable Assemblies Upgraded with Space-Saving Side Exit for Increased Design Flexibility
The crown clip junior power cable assemblies from TE have been updated with a new side exit, saving space by reducing the need to bend cables during routing beyond the center of the server, switch, or storage enclosure. The extra space allows for greater design flexibility and the use of larger wire sizes as well as multiple wire gauge combinations, allowing for transition currents up to 200A....
Read More »
Latest MIN Size III Cordsets are Suitable for Use in Harsh Environments
Mencom’s MIN Size III Cordsets are now redesigned for use in rugged environments. The connector’s coupling nut with wide knurl area makes the installation process easy with improved gripping. The coupling is made from nickel plated brass that is resistant to salt, corrosion and weld slag. The units are available in multiple pole configurations including 9, 10, 12 and 19 pole and are made with...
Read More »
Thermal Solutions Guide: The Challenges for Heavy Equipment OEMs
In this guide, we consider some of the most common applications that require thermal solutions, such as vehicle exhausts, fuel tank shielding, and engine compartments, firewalls, & underbodies. As well as the options available to mitigate risk around combustion engines.
Read More »
New DVI Cable Assemblies are Suitable for High Resolution Display Applications
MilesTek offers DVI Cable Assemblies with DVI-D Dual Link, DVI-D Single Link and DVI-I Dual Link connector options for variety of digital video applications. The units come with 45-degree and right angle connectors. The angled DVI cables are used in enclosures, cabinets or other confined spaces.
Read More »
Latest Right-Angle M12 Cable Assemblies are Designed for Harsh Environment Ethernet Connectivity Applications
L-com’s TRG507-T4T Right-Angle M12 Cable Assemblies are available in TRG507-T4T and TRG508-T4T models. The units are designed with outdoor CMX-rated, double-shielded, FR-TPE cable for use in oil, UV rays and weld splatter exposure environments. TRG508-T4T units come with M12, 4-position, D-coded connector on one end and shielded RJ45 connector on the other end whereas the TRG507-T4T units...
Read More »
New IP67-Rated HDMI Cable Assemblies are Designed for Harsh Environment A/V Application
L-Com’s IP67-Rated HDMI Cables come with waterproof coupling that prevents ingress of water and fine particles. Units support resolutions of 4K and 1080p and come in rugged molded backshells and gold plated contacts. VHC00023 couplers are offered with standard female HDMI Type-A connector and PC tails on either side for termination to wire or a PC board. Cable Assemblies are suitable for...
Read More »
New CT4098 Series BNC Cable Assemblies are Constructed with Bend-Relief Boots
CT4098 Series BNC Cable Assemblies are available in CT4098-25, CT4098-50 , CT4098-100 , CT4098-120 , CT4098-150 and CT4098-200 models with 25, 50, 100, 120, 150 and 200 cm lengths respectively. Units feature an insertion loss of 0.8 dB/m (1 GHz) and a VSWR of 1.20:1 (DC to 500 MHz) and 1.70:1 (500 MHz to 1 GHz). The cable assemblies are compliant to RoHS standards and provide frequency range of...
Read More »
Latest High-Flex Ethernet Cable Assemblies Feature Tinned Copper Braided Shield
L-com’s High-Flex Ethernet Cable Assemblies are available in TRD855HFB, TRG515-P6D and TRG516-P6D families. Units are designed for continuous motion, factory automation, robotics and machine vision applications and are rated to 10 million flex-cycles. The cables are EIA568 color-coded and are protected against EMI/RFI interference. TRD855HFB assemblies come with RJ45 connectors and Category 5e...
Read More »
Heilind Electronics Now Stocking JAE DX07 Series USB Type-C Cable Assemblies
JAE Electronics’ DX07 Series cable assemblies are compatible with next-generation USB Type-C protocol for higher speeds and scalable performance WILMINGTON, MASS. (PRWEB) MAY 22, 2018 - Heilind Electronics, a leading global distributor of electronic components and authorized distributor for JAE Electronics, has expanded its extensive inventory of interconnect products with the...
Read More »
Precision Fabricating with Over 40 Years of Experience
Quality Sheet Metal specializes in delivering precision, value, and customer service. With a client base that spans many diverse industries and a reputation for excellence that goes back over four decades, our clients know that we can provide the optimal combination of value and flexibility regardless of the challenge. See our video to learn what we can do for you. Through investments in state-of-the-art design, manufacturing, and quality control systems, Quality Sheet Metal remains focused on maintaining a high standard of quality, customer service, and competitive pricing. With an emphasis on customer satisfaction, Quality Sheet Metal is dedicated to establishing long-term partnerships, similar to the ones they currently have with their valued clients. If you're looking for a new partner with extensive capabilities in sheet metal fabricating and finishing, look no further.
Read More »
